Search results

We know how the shop did it. Just most of them won’t. I called our local third party and they said they wouldn’t do it. A mobile tech might do it but they have ti be a master tech

You’ll get the tax credit based off the guidance the irs just released

was it one of the lfp batteries or the standard lion

The service centers in Arizona won’t do any route *sugar*. They suck. I have hepa and lumbar. Eff me I guess

interesting, I know for a fact that the service centers can do this because of the ecu update.

Answered my own question after update my center usb still work with data!

So my center console supports data, am I loosing that now?

I was thinking at one point in time I wanted to do this, but then I changed my mind. 1) I have the seven seater and yes I know it works but then When I need the seats in a pinch I gotta figure out what to do with the shelf. 2) The stuff I have back there is usally taller than the shelf anyway.

oh i figured it did because the other functions work. I guess your post makes more sense now.

we know 12v comes to the tesla switch to move the other componets in the seat. couldnt you just cut the trace to the lumbar button then pull the 12v from the board its self to the lumbar portion of the switch?

i know im not getting clipping. ok that works thanks

So because I suck...lol Im trying to now figure out the projected production for those two arrays. Maybe you can help further. Slope is 23 for both azimuth is 112(east) 4000kw and 292(west) 4400kw, located in Mesa, AZ, what numbers could i put in PV to give me a rough production estimate.

That's way more info than I anticipated, yet extremely helpful and makes way more sense to me lol

Trying to get estimated power production for 3 strings connected to two inverters. 14.4 / 2PW+ w/ 2 - 7.6 inverters. Phoenix, AZ String one that faces south is 15 / 400W panels. Connected to one 7.6 inverter. So .78 ratio? String two facing east 10 / 400W panels and string three facing west...

It worked very well, much better than the tesla version

have them on mine did that exact thing. No issues

I used the scratches happen kit on amazon.

the second row on the 5 and 7 seat are the same config other than on the seve seat it can slide forward and back ward

Some additional info if Im allowed. This is the same pump the Maserati comes with, Also for what its worth the Ghibili jack is a pin jack, which looking at it you might be able to use that to lift the car and not use jack pads. The modern spare is 145/85R18 103M stands 27.7" tall The...

Which jack also check your messages lol

Will this think fit in the sub trunk, what is the size of it in its compressed state

May not be those but same design, they scratch the plastic. I have the tesla clones that come with a front ant rear https://a.co/d/3VKmxut and this in 8.5mil Amazon.com

you may not even need to go that far if there is constant hot in the switch.

That new case is big basially 9"x 7" x 3.75"

It is better for the life time value. While that hitch might say 350 that doesn’t mean the car should be doing that. It’s entirely possible that tesla is being over cautious

I mentioned that but haven’t investigated the problem is it CAN signaling. Sure you might be able to hot jump it if there is constant 12v and you cut some traces

I wasn’t sure so thanks for clarifying

That’s why I said I havnt tested that I’m not sure 100%

You can im theory that’s what the top half of the ccs plug is. In j1772 it uses the on board charger. In ccs when the high voltage lines are connected the j1773 is only used for signaling. The ccs adapter with out the dc connection connected should act just like the j1772 adapter

Since that small projector case is out of stock and I really didn’t care for the Apple TV one. I set out to find a better case for this adapter. I was looking for a case that would fit both the j1772 and ccs adapter. Technically you may not need both since the ccs adapter does it. I havnt tested...

Tesla absolutely requires credentials to order it, and they make sure you have a vin in your account. Harumio is using a series of donor accounts.

check tesla directly, ive seen many things be cheaper from tesla directly

this should be the driver door 1497295-91-D in black this should be the passenger 1497295-91-B in black. No vin required for either, it might be cheap who knows.

looking for a coupon code

cant your order from tesla?

the seats arnt terrible I dont like the door trims

I was able to get this to work by having a secheduled depart time of 2:45pm and setting off peak to 6pm and telling it to charge off peak. Im goign to see how that goes but most likely im just going to use optiwatt

I just replaced my charge point charger with the tesla one and was flabbergasted that this was not a basic feature with out being convoluted Both the ChargePoint and Juicebox do this perfectly fine

You don’t want that three piece mat for the 3rd row it blocks the rails and you can’t close it you want the single one like in the link I posted. It talks about the three piece one in the reviews on Amazon for it and I think taptes

same

same mats. enjoy https://www.amazon.com/gp/product/B09NSC66CJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

I ordered one off ebay a year ago, still fine. clean the areay with acetone or alcohol first

thats what i did, it doesnt appear to have shipped yet, it also hasnt been canceled yet either though

I have sonic....lol

That brings the question, does that mean controllers plugged into there rather it be wireless dongle or hardwired dont work in the newer vehicles? Surely they cant disable data on cars that already had it? Could they?

8.3 nope!

yea id want the graphana dashboard

Can you share this

Theve replaced them with screws

yep, and to be fair my parts guy warned me of this. I question if your replaced the contoller with the "pre removal controller" could they put you in a different config