I thought I would share the video I made on doing it
https://youtu.be/qi49PO7pxIc?si=8FL...16taZsDERG9ONi55vmch7qhiu1COR2VetahOOm7NMcQMQ
https://youtu.be/qi49PO7pxIc?si=8FL...16taZsDERG9ONi55vmch7qhiu1COR2VetahOOm7NMcQMQ
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Yes, externally it’s the same connectors. They just changed the internal electronics. Disconnect all the connectors, unbolt, slide the part up and out. Then reverse for the new part. Then do the programming/software redeploy/calibration routines.good job . I did the matrix headlights as well. Much brighter, 4 beams and cleaner Angel eyes. I’m doing the swivel screen next as soon as I get my car back. Question for the VCLeft. Does every plug goes back on the 03-b board ? Every plug which was on 02-b board goes on the 03-b board ?
View attachment 1015796
Sounds goodYes, externally it’s the same connectors. They just changed the internal electronics. Disconnect all the connectors, unbolt, slide the part up and out. Then reverse for the new part. Then do the programming/software redeploy/calibration routines.
Very cool, and I agree with @Muzzman1 ! Those LEDs look good, can you tell us about them?I thought I would share the video I made on doing it
I thought I would share the video I made on doing it
I have the swivel in my mxp but not in my msp. but when I sit in the mxp and watch videos, it’s a better view. Unless you watching videos, it’s not really needed. But it’s a good feature to have.This is great. I can't help but wonder if I'm the only person who doesn't use this feature on my X and prefers the screen to be flat...
I dunno, after getting used to it tilted to the driver, flat just feels wrong.This is great. I can't help but wonder if I'm the only person who doesn't use this feature on my X and prefers the screen to be flat...
AgreedI dunno, after getting used to it tilted to the driver, flat just feels wrong.
My Plaid is flat and my wife's X is tilting. We leave her in flat too. Just never got around to tilting it on hers so that I would be pissed that mine doesn't tilt.This is great. I can't help but wonder if I'm the only person who doesn't use this feature on my X and prefers the screen to be flat...
I have a video on the Plaid facebook group but maybe I should upload one of my channelVery cool, and I agree with @Muzzman1 ! Those LEDs look good, can you tell us about them?
If you lived near me!could we like.. pay you to do this?
Total is about $300 ish for all the partsCongrats, that’s a very cool upgrade.
I don’t like watching videos, so any chance you have a bill of materials for parts needed?
Could you arrange for the gateway config to be changed as well? What if I flew you out?If you lived near me!
Total is about $300 ish for all the parts
I could guide you through the process live and yes I can arrange the config to be changed but you will need a laptop and depending on the mcu in your model s you might need some extra connectors to connect to the mcuCould you arrange for the gateway config to be changed as well? What if I flew you out?