Certificate should be fixed now, sorry for the delay.
-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Tesla Winds and Elevation Web Browser App
- Thread starter SomeJoe7777
- Start date
lightningltd
Member
Installed it yesterday in my 2013 Model S with the upgraded screen...
The elevation reads -1000 and the speed reads 0.1 for some reason.
The elevation reads -1000 and the speed reads 0.1 for some reason.
swaltner
Active Member
That sounds like web page isn't getting a proper GPS location. Have you granted permission for the web page to get your GPS location? Is the wind information being shown for the closest city (weather station) to where you are located?
lightningltd
Member
Location is active, the API keys are entered. The page gets the heading info and keeps it updated, just no elevation and current speed is 0 +- headwind.
Certificate should be fixed gents, sorry for the delay.
Screen Shot - Sorry it's all washed out...
Closed/re-opened it, Drove at 60 and 70 MPH for hours, no changes other than the wind/direction/heading.
Double checked the API's in the browser and they're correct. Can someone narrow down if it's GeoNames or Openweathermap that might be the issue?
My thought was that Geonames is working because it knows where it is and what direction/heading I'm traveling?
Closed/re-opened it, Drove at 60 and 70 MPH for hours, no changes other than the wind/direction/heading.
Double checked the API's in the browser and they're correct. Can someone narrow down if it's GeoNames or Openweathermap that might be the issue?
My thought was that Geonames is working because it knows where it is and what direction/heading I'm traveling?
I just checked. If I tap on the little pin next to the URL is says location is shared with the website. I guess the Model Y isn't supported?
KArnold
Active Member
Maybe try clearing cache? If you have not done so, read the prompts carefully as it also deletes favorites by default. My Teslawinds page apoears to work.
Location is enabled - still no speed or elevation...
Cleared the Cache - Nope
From the original posting, it appears to be something with Geonames.org since that's where the elevation is coming from
I double/triple checked the username, the Geonames account is active and working, I'm logged in, etc - Still nothing
Started looking around on the Geonames website and on the Webservices Documentation Page --> GeoNames Web Service Documentation
In the 2nd bullet point it states how to enable your account for the webservice, there is a link to "Your Account Page" to do this.
Click on that, then on the bottom of that page is another link to click (sorry, no screen shot) that enables free webservices.
Now elevation works, need to take it for a drive to see if speed and grade work too.
Cleared the Cache - Nope
From the original posting, it appears to be something with Geonames.org since that's where the elevation is coming from
SomeJoe7777 said:
I double/triple checked the username, the Geonames account is active and working, I'm logged in, etc - Still nothing
Started looking around on the Geonames website and on the Webservices Documentation Page --> GeoNames Web Service Documentation
In the 2nd bullet point it states how to enable your account for the webservice, there is a link to "Your Account Page" to do this.
Click on that, then on the bottom of that page is another link to click (sorry, no screen shot) that enables free webservices.
Now elevation works, need to take it for a drive to see if speed and grade work too.
Similar threads
