You had the macboost shims installed, right? I just had it done at a reputable shop and they installed it on driver side only, bringing the rear camber (approximately) from -1.8 to -1.4 on the driver side, -1.9 to -1.6 on the passenger side. He said installing the other one would bring down the passenger side much lower than the driver side. Followed up with an alignment and the car drives fine. These are the numbers in medium height. Thoughts on if I should just get the other one installed? (this is open anyone here to chime in,
@Sam1 ). This time I was going to go into service mode and put the suspension in low so he can tweak the alignment further.