Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Model Y 2024

This site may earn commission on affiliate links.
Hello All,

I just purchased my first Tesla MYL. I missed two issues during delivery/acceptance. I noticed there is a dip in rear glass and hatch and front windshield has a high point in the center, the pics are attached.

Tesla acknowledged and is good to replace. Should I do this or not? I am worried the car won't be same as factory.

Thank you in advance.
1000017420.jpg
 

Attachments

  • 1000017421.jpg
    1000017421.jpg
    371.3 KB · Views: 2
  • 1000017419.jpg
    1000017419.jpg
    258.3 KB · Views: 2
I wouldn't let them touch it. Leave it alone and stop being so nitpicky..
It would probably come out worse and have paint damage from replacement.

At the factory the sealer is applied by a robot and the glass is set with the aid of
an overhead carrier. None of that is done @ a SC..

It's a mass production automobile, not one off custom vehicle.
 
Last edited:
I had a related issue, on delivery a noticed a tiny blemish in the paint and had it noted.
Later in the service bay under the light I decided not to get them to repair it.
Figured a similar outcome to you. Something else would get messed up and it just wasn't worth being without the car.
Main thing was that it was noted in case there were issues with paint in that area later.
 
  • Like
Reactions: nycelitemaster