Tesla refused to sell me a PV system due to the trees around my house (after the end of January storms, the trees fell all over the place including on my roof, so not an issue anymore), I had to use Enphase as my PV system. The good part, they installed my system within 3 weeks of ordering. With that installation I started to use Enlighten app to see my consumption and production. It was easy to see the grid import and export. The CTs are at the envoy solar production and on the main grid lugs. Yesterday, my 2 Powerwalls are installed. The Tesla app shows where the power is flowing very nicely.
The problem is the Enlighten is now complaining about the measurement. Since it does not know I have a Powerwall, probably it sees the difference between what is produced and what is sent to grid.
enphase community is full of marketers and it is not easy to get an answer. Are there any members of this community who resolved the issue? One way is to delete the enlighten app, but it still gives pretty good amount of information. Another option would be to remove the consumption CTs and use the app only for production.
The problem is the Enlighten is now complaining about the measurement. Since it does not know I have a Powerwall, probably it sees the difference between what is produced and what is sent to grid.
enphase community is full of marketers and it is not easy to get an answer. Are there any members of this community who resolved the issue? One way is to delete the enlighten app, but it still gives pretty good amount of information. Another option would be to remove the consumption CTs and use the app only for production.