Quick Help!

[pabla]

Hello all,

Was looking to purchase a set of spacers for my '14 P85. Was about to purchase a set from motorsport-tech but saw a set for sale local to me. They are 20mm in thickness, bolt pattern of 5x120, bore of 64mm, threads are 14x1.5. They are H&R Track+ wheel spacer they were originally for a Honda Civic Type R. Everything seems to check out, but I cannot confirm anywhere if these exact ones will fit on the car. This is my first set of wheel spacers im purchasing so I don't want to overlook something. Can anyone quickly help me confirm if these will work? I know the 20mm will work, I want to confirm if the other specs of the wheel spacer will work!

 

[Doanster1]

They should work. Our CB is technically 64.1mm, but I doubt you’ll have any issues as I don’t think tolerance for manufacturing spacers is down to .14% (64/64.1).

 

[pabla]

They should work. Our CB is technically 64.1mm, but I doubt you’ll have any issues as I don’t think tolerance for manufacturing spacers is down to .14% (64/64.1).

Awesome thanks I was beginning to think it was too good to be true! But it’s true!

 

[Doanster1]

Awesome thanks I was beginning to think it was too good to be true! But it’s true!

The specs you listed look good on paper, but make sure the length of the studs will work for you as well. Also, depending on what wheels you’re running, but you might run into the same problem with the mounting/stock studs needing the backs of the wheels to have a cavity for the studs to protrude into. Otherwise you may have to shave/grind them down.

 

[pabla]

The specs you listed look good on paper, but make sure the length of the studs will work for you as well. Also, depending on what wheels you’re running, but you might run into the same problem with the mounting/stock studs needing the backs of the wheels to have a cavity for the studs to protrude into. Otherwise you may have to shave/grind them down.

I can’t find any info on the stock length of the studs, the seller did however agree to let me test fit. I’m using them on the oem turbines and from my understanding the 20mm should be fine

 

[Doanster1]

I can’t find any info on the stock length of the studs, the seller did however agree to let me test fit. I’m using them on the oem turbines and from my understanding the 20mm should be fine

Test fit will remove all doubt. Hope it works out for you. Can’t go wrong with H&R.

 

[pabla]

Test fit will remove all doubt. Hope it works out for you. Can’t go wrong with H&R.

Thanks for the quick help! Will update the post with pics if it works out

 

[pabla]

And the final verdict is... they worked!! Thanks for the help

 

[pabla]

And the final verdict is... they worked!! Thanks for the help

 

[Doanster1]

Nice!! Fitment looks spot on. Do you have SAS on your P85 or coils?

 

[pabla]

Nice!! Fitment looks spot on. Do you have SAS on your P85 or coils?

SAS with lowering links 58/78mm front/back.

 

[Jpandes]

Looks great! Do you have camber arms?

 

[pabla]

Looks great! Do you have camber arms?

That was my old S which didnt have adjustable rear camber arms. On my new S however I do have EV Tuning's adjustable rear camber arms installed and the car has also been lowered. Just waiting for an alignment