Recent content by Hotboy408

need remove all that, hub and axle nut need to push back in order slide new longer stud in.

16-24 CAMARO SS 1LE FRONT OEM BRAKE ROTOR , (SLIGHT SHAVE FOR CENTER HUB RING) 23142500 (LH) 23189768 (RH) caliper is off CTS-V GEN 2 SPACERS 10MM + LONGER CALIPER BOLTS BRAKE LINE IS OFF MODEL 3 - STEEL BRAIDED

the left tailight come out w/ the charge door. (best option) or you can disconnect the charge unit and get access to the nuts circle red.

If your battery still cover under warranty it's free. I end up had sc inspect my Updated fuse clear the light for me. Under warranty. No charge.

Revise old thread, I end up add some custom mount inserts and seal it up. Because instructions say drop hv main battery, remove half shaft and steering shaft to get access to clevis mount bolts in order to remove it.

i get to drive alot of plaid, and they all vibrate in the rear.. 2021-2022 mostly got some miles on the odo

really ? most people can't differentiate front or rear vibration anyways. but sure keep believe its the front then.

SOFTWARE is to reduce torque at certain mph so reduce vibrate, root cause its the axle can't handle the torque. i confirmed this with swapping rear axle left to right to fix the issue.

i Flipped my rear axles left to right, both same part # confirm fix the vibrate when acceleration!

Did my rear drive unit fluid today. SUPER dark. I would change every 20k miles interval

Changed the fuse myself, 5min job very easy. But message still on, Don't have toolbox 3 to reset error. I hope it goes away by itself 😅

Just got this message my S.. Will remove fuse and check part #. If it's battery powered. Then I will get self powered one.

Yes had it done long time ago. Alcantara Never had problem again

So you have tesla service level toolbox 3 software assumes you also have access to repair manual but can't figure out repair and ask general public for help.

No it won't have horn button for sure. Because in order to add airbag springs loaded require add more hardware and wiring, since that requires new contracts vendor produce new parts