Recent content by MYLR_ON_CA

It not that hard to remove bumper but you need to do that to take number support off and install hitch.

Yes, I put it so head of the bolt is towards the back of the car, if you put the bolt so the head is in the front, you have to put the Homelink module in front of the clip then? I just put it in the back and see no issues. (Front of the car) - Mointing clip - Homelink module - bolt head (back...

I did that by using 1hr subscription from Tesla UK and connecting the MY to Macusing Ethernet cable and chrome browser. Do the laptop setup before buying subscription. Just need 5 mins in Toolbox to enable trailer mode and you can have the icon and the option to manually enable/disable it.

I just completed the DIY, it is not an easy job and based on my experience it’s better to buy the whole thing from Tesla and you let Tesla install it. Here are the reasons/my experience: you have to find the hitch that's not damaged, first one I bought off eBay was bent so I had to get refund...

if you now enable Trailer Mode manually without trailer attached, do you see Red Trailer icon on the screen.

I didn’t have to twist anything, just simple 10mm socket on a 1/4 ratchet.

Same issue on MYLR I picked up in May. I took it in Aug and was told it’s a known issue and Tesla is coming out with a fix. They won’t replace the mirror because they have been told my Tesla it doesn’t fix the issue. I said I will check back in 2-3 months so going to check with them in couple weeks.

I enabled trailer mode from Toolbox3, it can be done in 5 mins.

Service.tesla.com you can subscribe there to get access

I have exactly same issue, when I fold the middle seat down, there is no noise but when all three seats are up, they rub and make noise. I am going to do what you suggested but they recline only a little and my family likes them reclined all the time. I wonder if Tesla fixed this issue for...

See attached.

“According to this chart, the best cycling range is 55 % down to 35%( see note below about true SOC)” Meaning charge (NCA Panasonic) to 80% and let it drain to 35-55% before charging back up to 80% or keeping it between 55% (charger limit) and at 35% charge it back to 55%?

From what I have heard, it can be.

Hi All, With help from some of the existing posts (@gman99, @snyder). I have secured some parts to create harness that goes from the hitch to the Trailer ECU. I will post all the details here including part numbers once I am able to build a working harness including enabling trailer mode I...

Pleas note that that wall connector works off 2.4Gz Wifi band. I didn’t have any issues because I have a dedicated 2.4Gz wifi band for all internet enabled devices. From I have heard that if you have same SSID for 2.4Gz wifi and 5Gz wifi then people face issues. I just followed the steps in the...