Recent content by notmeguv

I have a Solaredge 5kW inverter and a Powerwall 2. My export limit is 8.68kW. I have tested and can export from solar and battery at the same time at more than the max 5kW of the Solaredge inverter (due to the Powerwalls integrated inverter). So in theory should my system be able to export...

I’ve heard back from the installers already… Of course there’s not much sun forecast for the next few days so I won’t be able to test it for a while 😄

My export to grid is not an issue. I can export at 5kW from the Powerwall and higher than that, up to 8.68kW, with solar and battery export combined.

Only fitted in November so still very new. There’s a definite flat line…

I have DNO permission to export 8.68kW, not sure what that equates to in amps? I’m not sure where to check fuses. There is PV Array Junction Box but it’s screwed shut. There are no fuses for the PV in my consumer unit.

As above it’s not the wrong inverter. It’s labelled as a 5kW (Solaredge SE5000H) and I can export over 3.6kW which wouldn’t be possible with the lower rated inverter. I don’t expect it to be able to produce the full 6.7kW but it currently flat lines at 3.8kW. I would have thought it should be...

Wrong inverter? It’s labelled as a 5kW and I can export over 3.8kW.

My PV is split between 2 same size arrays, east and west. The max output should be 6.7kW but now we’re getting a lot more sun, I’ve realised it’s clipping at 3.8kW. Even today with the sun directly overhead and a clear sky, it’s maxed out at 3.8kW. I have a 5kW inverter so would expect to...

I’m with Admiral for my business lease.

Sorted. It was obvious really, I just re-downloaded the latest version (without removing it first). It accepted the owners API token and is up and running again.

Thanks, I’ll try restarting HA. I did try to reload a previous version but 3.19 is no longer on the list. I was trying to avoid a fresh install as I have quite a few automations set up and not sure if I’d lose them? That will be my last resort.

I can generate an owners API token ok. The problem I have is that I checked the ‘Fleet API’ box in the HA configuration to see what was needed and now I’m stuck in the screen that needs the additional Fleet API details. My car might not even be on Fleet API but I can’t get back to the first...

I think I messed it up! I ticked the box for Fleet API before I posted here earlier and now it’s asking for extra fields as below. I can’t find a way to get back to the first screen to uncheck the Fleet API box.

Thanks I’ll try that.

Have you got it working yet? When I first set up the integration I used the iPhone app Auth for Tesla to generate tokens. This now has a Fleet API section that requires logging in to your Tesla account and then generates tokens. Any ideas if that will work with latest HA integration?