Recent content by P120D1GY

First charger is about 15 ft of conduit to install location, the second charger is roughly 25-30 ft (opposite side of garage). It appears installer ran with the WC power cables, not sure if they ran additional shielding on the wire or if / how they extended. I can pull the WC face to take a look...

It’s using the RS-485 port on the wall connectors. The communication wire is the part number you mentioned above.

Each wall connector appears to need its own smart meter unit. Ideally Tesla Connection was via RS-485 port (connected to meter’s COMMS port in the attached pictures). The wall connector’s admin will show the corresponding meter in the “metering” section when connected. I did connect the meter...

I had 2 Tesla Gen 3 Wall Connectors installed this past week with 2 of these Tesla Smart Meters. These are definitely new to Tesla installers; had a few “how-to” hiccups when commissioning — Tesla could do better to provide better documentation to their installer partner network. At first I...

Just got this issue on a my week old 75D running version 2017.50.3. Going to call the SC tomorrow.

I know this is an old thread but my experience with Tesla delivery “specialist” has been horrible. I’m not sure what value they add, my Los Angeles delivery “specialist” has been unhelpful during this whole ordering & delivery experience. They do not reach out, I have to constantly reach out to...