Recent content by tiburci

Sorry for the one year delay on this. I got the front bumper OEM 2021, but everything didn't match, at that time I thought. that shorter route was modifying the front bumper to fit all the securing points. using the MS2020 as a guide. Kind of making one front bumper from two using 3M 777 and...

Whole front end including fenders? I still have the 2021 MS OEM front bumper. My issue was with both fans I knew it was doable, but really time consuming.

Same price $475.00 but Tesla won't touch totaled cars, unless the expensive battery check is done, which is ok with me. . So at Least now we can go to CCS1, while other brands go to Supercharger.

I got this screen too, it remember me to open the GTW, once open CCS! button install the CCS1

There we go. As of today to do a CCS1 update to tesla mod S, untouchable for tesla, then you go and buy Tesla PN, 1652001-00-X that will include a PN 1454545-00-A the CCS1 plastic adaptor the ECU (small box with some electronic and the bunch of cables, you will have to either wait to have the...

DONE, I bought the PN 1652001 - from Tesla, installed myself and in 2023.12. x software using service mode just HV and CCS1, and voila worked. ccs1 is active now. thanks

Really appreciated. I end up buying the PN 1656565-00-a from Tesla which includes adaptor, board and cable for Model S 2020

In my case the combo included the adapter and installation all for $450. in mine they didn't proceed with installation as I'm not supported. but they sold me the whole package for $450. The funny thing is that I'm supported in tesla supercharger in a Totaled Porsche Taycan ...jijiji

You got that ccs. under HV your car has 2 lines charging and HV Battery. Mine have only one Getting into HV no ccs. What yu can do in CCS? Mine has no CCS installed.

No, there is not such a button in service mode. the thing you will use in service mode is the Full redeploy after you install and modify the Gateway. You can open Gateway in service mode, but not modify it.

that is 1656565-00-A. include the $175 ccs1 adapter and the cable, and the ECU MS plcrly ( p/n 1495149-00-c and 1487937-00-a}

I bought from Tesla the 1656565 P/N. That was easy, installed is very easy, Full service redeploy is easy, But they won't touch my car... so finding the friendly looking gut in a SC to change and add, is the hard part. MCU2. uhhh. Any ideas?

I did end up finding a friend that helped me make the required software/Gateway configuration change. Where may I find a friend like that. I already ask to most of my friends to not avail. Thanks

O need to set "otherfastchargeallowed 1" and "plcadaptertype 1" in the configuration of MS Dec 2019 car (internal.dat of the gateway). Any way to do this?

Really apprecuated. by any chance dd you noticed the P/N of the parts they installed? maybe not, but just in case it will help.