Recent content by Young Phenom

Can't connect to my model 3 but no issues with the model Y. Gave in a bought the fob. No issues since

Yup you need to break it free

Had my 2022 M3P driver side hatch light replaced due to excessive moisture in it. When they came out to replace it the tech found a small crack on the top black area and into the clear portion.

Tsportline

https://www.ebay.com/itm/133888914008?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=TkvY4xm8TmO&sssrc=2349624&ssuid=_9ck8f-trs6&var=&widget_ver=artemis&media=COPY This is not my account, not for advertising purposes, just sharing what I bought. Yes it is doable if you are handy. The guts of...

Installed this wheel a week or so ago, much better than stock.

If it's unrelated they won't care.

They probably weren't intended to hold the extra weight

I found using a sturdy trim removal peice (ideally a hooked edge for better support), wedge it under the notched side, and pull down like hell in a swift and strong motion. When I was trying to baby it I ran into more frustration. I didn't break any but YMMV. Not that it matters they are super...

You can touch and hold the temperature on the bottom of the screen for a few seconds and it'll also turn off without going into any menu.

Just precondition the car before you get in it. I do before I leave work in Florida and my car goes from 150+ inside the car to 72 in 10 mins or so. The fans kick to high under 72 at least for my car. So if you can run the AC around 72 then it'll conserve some energy. Doing so you'll get in a...

Definitely harder on my 2022 M3 to remove compared to my 2020 model Y. Use a plastic trim removal tool to pry the notched side up. It takes some effort but you won't break anything.

I can confirm this works and is a much easier way to go about uncompressing the spring. You're compressing it via the jack and letting the car withstand the force and you slowly release it. I did lowering springs back in the day and I did one the old way and thought to myself why am I going...

It is a strange thought process.

Mine are tinted now yes. In that pic no. I went with 15% Lumix IrX