Search results

The brakes a defentive better than before when i hit the brake the car stops better and it feels little qucker in accerlation too

in Sweden there are 13-14 roadsters (13 with sweidsh plates one with norweagan) I bought mine in Germany but came from Spain from the begining

If you have single motor dual fan model is it a Spal 014-AP74/LL-22 Googgle it and you will find some one that sell it

It's hoples wash car in my area, the farmers driving there tractors on road with dirty wheels, same every spring. And little rain and the car dirty like hell

Now have i installed my break rotors One of the old ones Repced with a new New compared with old seen from inside placed like this right rear (new) left rear (old) right front (new) left front (old) Right front installed They looks great It was...

wheel bearings

I have picked up mine kit They looks great Only installing left I will take it some day when i feel i have time to do it

I done nothing with mine Worked perfect, i have not charge it under the winter or somthing like that

Not for the moment, but it was from some motorcycle parts dealers web page in sweden,

It's still working with out replacement

My brother in law is taken photo of my roadster when we were and vist them on estern

One guess is that EU version is not ready yet

Say you do one by self if they not want sell on to you

I think you need a barlast to fake the fan And the fan use diffrent speed depding on conditions

I have swapped mine screws to Stainless Steel

nice

look her for the temp problem with Jdemo Manual battery cooldown mod - a cure for the Roadsters insomnia It worked well to control the temp when charging with Jdemo

take out the ESS plug

what type of cells are you using? original or have you upgraded with some newer type?

I can test if min turn headlamps off but don't think doing it, even if i have regententing brake light on mine

My roadster have regenbrakinglight. I apered after restart of vdms i think after low power in 12V system That's the good with powerloss The bad is car think it have TPMS but i donät have anny hardwere to it

You have a PM

The Chademo inlet placed in the trunk floor A diffrent as the kit thinked to place In the deffuser

Do you have a data sheet on it? and what materal is it

The coodown worked good I hold the temperture constant (+-1 C)under charging with Jdemo (50kw Chademo) The sesion was approx 20 min

Her's a link to diffrent installation of a Jdemo kit CHAdeMO for Tesla Roadster, Quick Charge Power JdeMO deposits The inlet is placed in the trunk floor

Clean the PEM Have you 2 fans or only one dubble If you have one the risk one of them don't work ok

If you lift the PEM And read on the motor. very easy to see and the motor is marked with 2.0 Sport motor

some cars have sports motor that are not sport like mine

I think i need to use approx 3 to 5 mm of shins on each side to get ok camber I made shims in 1mm, 1.25mm and 1.5mm 304 (1.4301) material The shims is put in betwine upper arm bracket and the spindle, there is bolts that atche the spindle to the upper arm linkage

It work well with shims on non sport suspension I made shims by my self from sheet metal of som diffrent thickness

The focus on low beam is realy good mutch better light picture than original but took the bulds maybe 10 times for low beam and adjusted them, and i think is it posible do adjustment better than i did The high beam did i not adjust more than i rotated on of the lamps 180 degree becase of the...

high beam Tillverkare Ledson Levereras Par För bilar med ljusövervakning Ja Spänning 12-24 V Funktion Dimljus, Extraljus, Halvljus, Helljus E-märkning Nej Ljuskälla LED Diodtyp Cree XHP 50 Ljusflöde 5000 lumen / par Längd ballast 59 mm Bredd ballast 39 mm Höjd Ballast 20 mm Spänning 9-36 V...

Her's both before and after pics for my LED swap All pics are taken with my cellphone on same place on a moring The led light is better, you kan see real diffrence in the light in the 5 lights in the side how much bader they are on the LED pics Low halogen Low led High halogen...

there was some adjustments to get good light picture on low beam low beam in my garage with led light High beam low beam on same place as the first pics but taken with a system camera and i shaked it to. High beam taken with my camera Can be difficult take pics her becase of lot...

Low beam barlast and bottom part that fit to the head light Low beam box complet assembed Both high and low beam boxes assembled high beam on

I bought this LED converting kits. One kit is for projector low beam HB3, the other is for H9 high beam LED lamps left high beam and right low beam LED lamp 3d printer working with some parts Ready part The covers is made to fit the barlast Same part work for both...

I took 2 pics with my cellphone of how the light is with halogen light Low beam High beam I have bought 2 kit of diod lamps to my headlights more post will come when everythig is ready I have 3d printed some parts to the swap of lamps i must take care of the barlast to the diod lamps

Can be good to have AC cooling of the battery from OMVS to cool the battery extra under charging The heat raise is 2C for 5 min of charging

My car have no TPMS hardwere, but after som voltage drop in 12V system i got hardwere error, and TPMS error code evrytime i start my car, Tesla can fix it but not on the nearst service center, so in that case i need go to Denmark for have it done, but it's to far to drive to,(can do it now after...

I have thinking to do it but it's ileagal to in Sweden The yearly check say you have to good light

finn.no

The temp rise when Chademo charging is 1C each 5min with AC on

Clean the fans undre the trunk sounds that you have some dirt i them I had a leaf that in one that make car vibrating in high speed on the fan

Witch spring did you use? 500lb/in front? 700lb/in rear? or some special to the rear?

If you have the muddflaps to the Jdemo kit you need more holes in the rear defuser for let the air in Without them you get #1146 when you drive slow

If your battery voltiage is so low on a lead acid battery used on a fossil car it had not start and need to be replaced or charged

Spal 014-AP74/LL-22 is the part number on the fan

i own a black thin Cable to 230V 13A

and the only thing to roadster was car cover and hard top bag