Search results

Through a (not-so-clean) shop window....

This morning, Beauty and Beast:).

"Rediscovering" this thread helped me to adjust my setup (comfort adjustables). There are a lot of good tips here. Thanks all! My main motivation was to deal with some clunking noise at low speed over relatively small cracks. Jesse has been very helpful but everything I tried did not help. Then...

I retorqued everything to spec at ride height and checked the lower control arm ball joints. It did not help. Increasing the rebound (MPP comfort adjustable) helped somewhat although not eliminating the clunking noise. In any case I like the new settings much better (firm and smooth), which also...

Some old voice commands, such as "odometer" (the same as "open trips") and "tire pressure" (the same as "open service settings") are also back!

Very much so. It is a major improvement. Make sure you follow the installation instructions, especially for not putting lubricant on the spring perches.

I could not find any shop for this and ended up installing it with a mechanic friend.

Thanks so much. This is very helpful. Will check it out!

Thanks for the description. Do you have the part number or other ordering information?

My clunk started right after installing MPP comfort adjustable coilovers and the solid front lower control arm bearings. Maybe I should give the compression rod bushing a try too. Which one did you use? I see MPP sells a compression rod insert too. I may start there....

Sold!

Yes $300. Sent you a PM.

Yes, still available. It makes it a lot easier if you are in CT. Shipping cost for this is insane.

Yes, would you be interested? Shipped or pickup?

Thanks! I will ask the mechanic to check these. The upper control arms wee not touched. Did have the solid lower control arm bearings installed.

Thanks for the reply. The clunking sound happens in slow speed, straight line without turning, and over small bumps like the usual cracks on the road. It does get any worse or even feel less obvious with large bumps.

Yeah the problem is that many mechanics think their knowledge/experience trumps the instructions. I see this at the top of the installation guide. Perhaps make it a bigger font to increase awareness :)? I did see my mechanics hand tightening the top hats. Please see below for two clips, one at...

Search for "MPP Comfort Coilover making ping sound when turning wheel" you will find the thread on this. I believe it was also mentioned somewhere in this thread. The spring " jumps" at where it meets the spring perch (in my case the spring perch jumps together with the spring even though the...

I now have the adjustable comforts installed for two months and would like to share my experience. As many has said, this is a great suspension that that car should have come with! I installed this together with the solid lower control arm bearings, new forged 19 inch wheels (Jova) and a new...

PM'ed you. I am in New Haven.

Sounds good. It is still available. Would you like to come to pick it up?

$300 + shipping (or local pickup) to a good home.

Thanks so much for sharing your experience and the info. I will try to get it carefully planned!

Does not sound very much confidence inspiring for DIY :( @dfwatt @whatsupsor

Brand new, never installed, PU plastic material finish (OE rear diffuser and front/rear splashguard like). Brought from a forum member a while ago but decided to go for another version. Price at RevoZport: $750+tax+$300 (shipping to US) Asking: $500 + shipping charge Prefer LOCAL PICKUP in...

Thanks for the quick shipment! I look forward to getting it installed. I did order the press too, @whatsupsor, in case I need to DIY. But I may not be able to find time soon, as together with the coilovers it would take awhile. Any recommended installers near New Haven area (can travel a bit). I...

Thanks for the thorough response. You have convinced me on the front lower control arm bushing. Will order them and report back the experience. The only problem now is to find a good local installer (CT) :).

I got my MPP Adj Comfort Coilovers (waiting to be installed) and am now debating if I want a few other related parts: 1) rear upper control arms, 2) rear toe arms, 3) Solid Front Lower Control Arm Bearings. I will not track the car and don't do much spirited driving anymore , but still very...

My set arrived a few weeks ago. Any recommended installers near New Haven area?

Thanks for playing fair. I guess I wasn't clear enough. Yes, I would like to take it. Let's plan to meet halfway?

We could have made a deal last weekend :). How about sometime in the weekends half way to New Haven?

Is it still available? I may be interested. I am in New Haven.

Do you think the screws would be long enough if you put thinsulate in between liners?

Anyone looked into this? https://www.amazon.com/Customized-Front-Soundproof-Cotton-Protective/dp/B081GNV8J7/ref=mp_s_a_1_5?keywords=Model+3+rear+Wheel+Soundproof&qid=1574031597&sr=8-5#immersive-view_1574056203203 This for the front wheel well though. From earlier posts it seems the rear one is...

I did mine at a similar pace, only door trims today. I took my time and it took about 3.5 hours (sometimes I am really anal). It turned out to be very good. Great product! This is how the car should be shipped as, it now feels complete (barring the mirrors, but the door trim chrome is the major...

Looks terrific!

Great, just ordered! Thanks for the installation videos.

I feel the same now. XPEL earned our respect and support.

XPEL did reach out to me, by email and by phone. They clearly stand by the quality of both their product and service, and make all the effort to take care of the end users. They will even go extra miles to have their lead installer to come to reinstall the tint on my 3. This level of customer...

Is it possible that you post a picture of the connecting region between the two pieces? Thanks!

Yes, the installer is on the list. It is supposed to be a very reputable shop according to web reviews, which makes me think this was likely a subpar job on a difficult task from a good installer--everybody has ups and downs. What really surprised me was when the owner said this is normal due to...

WOW, you guys are really watching, and terrific! Will send the information. Thanks a million.

Is possible that you post a picture or your tint? Thanks!

Thanks so much for the discussions and information! The defroster lines are exactly what I worry about next if go for a redo. The installer said it should not be a problem since the tint is fresh and easy to take off. This is probably true but I don't know whether I can trust what they say now...

Thanks everyone! Yes, I am not sure I can trust the work any more for the redo. I may ask for a refund (likely a battle given the comment of "this is normal"). The harder question is then what? Find another installer to correct the problem (not sure anyone wants to touch a hard problem created...

I recently had my Model 3 tinted with Xpel Prime XR 35%. I really liked the tint. However, the tint quality was really questionable for the rear window. I did it in one piece and knew it was a difficult job. This was done at a shop in CT with very good Google reviews (4.5/5 from 62 reviews) and...