Search results

How much camber did you need to fit the rears?

Would you happen to know if they work with OG intel based MY (2020)?

Are these the exclusive size available from ZEVcentric? Edit: NVM, I just realized these are 20s.

I went with 255/35 PS4s. Much better looking and riding with minimal decrease in efficiency. Since it is a bigger diameter tire, I set my wheel settings to the Zero G wheels (uses 245/35) so that speed displayed is a little more accurate. Picture is mine, dropped about 3/4" with 14mm spacers...

I just reread this after posting my question. So it looks like I don't have to unbolt anything and just loosen the height adjust ring and turn the preload ring (left in my case)? The upper part of the shock is free to rotate without affecting preload? Am I understanding this correctly?

Can the ride height be adjusted without having to uninstall the front coilovers (Ohlins R&T)? I would like to lower the car the proper way (use ride height adjuster vs preload). I'm not sure if there is enough space to turn the forks to accomplish this. I can potentially see the axle getting...

Maybe I should have been more specific. 😆 I did see those posts but it does not intruct you how to put it back in, only that it is "easy" to remove. Do you insert the dial first then the plastic retainer (recessed side facing upwards)? Does the retainer snap in and is that what holds it in...

Anyone have this experience? I was adjusting the shocks and the bump dial (compression) on one of the font shocks popped out along with a plastic retainer. I have no idea how to put it back in.

Any recent installs in SoCal? I finally decided to pull the trigger on 1/1/23, maybe a little too late. What are my chances of being grandfathered into NEM 2.0?

PM sent

I don't know if this is allowed or the thing to do, but I received the item today as described and well packed! Seller is legit, communicated well and trustworthy. Install is tomorrow by EAS Motorsports.

PM sent.

Where are you located?

I recently ordered their version 1 sideskirts for my M3P. I called them direct to see if they had it in stock. The rep checked another website and said their inventory is more accurate on Performace Speedshop. The emailed invoice also came from Performance Speedshop/ Republic Car club. It...

Not sure about the MX, but the part we both needed for the M3 is the metal fastener that the plastic pin/clip screws into:

Would you happen to have a part number? It was a chore for them to figure out how to sell me the tow hitch cover.

Did you ever find a replacement for these? One of mine went missing and I lost the cover probably while driving on the freeway.

PM sent!

If it falls through, please reach out to me. I'll take em. To the buyer, if you are reading and you only need two, I'm willing to buy the other two from you!

Is this still available? Please PM to discuss.

I'm Interested. Please PM me.

Wht/Wht no FSD. SoCal. OD: 3/8 EDD1: 4/30 - 6/4 EDD2: 4/18 - 5/16 EDD3: 5/9 - 6/6 VIN Assigned: 4/20 Delivery Date: Today I just picked it up. No major issues. Only thing I could nit pick was that the bottom right corner of the driver's door was a little sunken in. (Had this same issue with...

Luckily I thought ahead and secured financing before April just in case I changed my mind on paying for the car outright. Offer is good for 60 days, so I figured why not. Maybe this is why I was assigned a VIN so soon? SA confirmed this is not a reject!

Wow..what a whirlwind. Less than 24 hours of my EDD updating. This happens. Is this a reject I'm getting?

Got an update today, 2 days into my previous delivery window: OD: 3/8 EDD1: 4/30 - 6/4 EDD2: 4/18 - 5/16 EDD3: 5/9 - 6/6 Wht/Wht no FSD. SoCal. Edit: order date

Got a text today asking if I was planning on trading a car in. Is this a sign of an upcoming VIN assignment?

My EDD updated: 4/18 - 5/16

Here's another data point for the thread... OD: 3/8/22 EDD: 4/30 to 6/4 White/White, No FSD CA

I just picked up my my car after getting the windshield replaced and noticed on my drive home that I have this issue as well. I brought the car in with version 2021.12.25. It looks like they pushed the latest update and am on 2021.24.5. Do I call to request to revert back to previous...

Can anyone point me where I can find the latest software for the Tesla Offer MK4? I can't find it on their website. My emergency button randomly stopped working as well but I have not tried unplugging (running software from factory in 12/2020).

Can anyone confirm if the new blue decals fit the clings sold by Abstract ocean? The look like the same size as the older stickers: Clean Air (CA -CAV) / Clean Pass (NY-CPV) Clings (Set of 4)

I had an old bottle of Mezerna FG400 laying around. The polisher is flex xc3401 with orange pad. I'm not a professional detailer by any means, but I do like to keep my cars looking clean. Honestly, I'm not sure if polishing was even needed. I had the stuff, so I figured why not?

. It took me about 2 hours total time.. Most of it was waiting for the touch up paint to dry. Very similar to Dr. Colorchip, if not the same exact product. Most of the chips were covered on the first coat, some of the bigger ones needed two. I thought I was receiving a regular bottle of...

For me it's high enough. Picked up my MYP end of June and I have 14k miles now. I drive 100 mjles a day anywhere between 70-85 mph. Below is a picture of all the chips I repaired with the OEM paint kit, prior to applying the blending solution and installing PPF. The highest chip was well...

I finished installing mine today and am loving it so far. Used it about 5 times in the last 2 days, which is the same amount of times I've used it since owning the car in June. I'm impressed with TO's customer service. To make a long story short, I needed help getting it to work and reached...

Awesome. Thanks for the explanation!

I just received my TO V4 Automatic Frunk and am going to install soon. For those those that have the V4, can you elaborate what extra steps are needed to install the loop sensor if possible? Thanks in advance!

I finally received mine. Ordered #1722xx, placed on 6/28/20. It looks like they are running a bit behind again. I never received an email with tracking info or confirming shipment, but I'm glad it's here!

I've been following this thread closely and was close to cancelling my order placed in early July.. I'm glad this hub looks like it does exist! I ordered a spacer separately and it was shipped from Moreno Valley back in August. Did yours come with the free spacer??

Named mine Y2-D2 and whenever I purchase a used M3, that will be named 3-CPO.

Subscribed. This has been on my mind since driving a MS loaner with air suspension. I reached out to UP through their website for a price installed, but I have yet to hear from them.

They told me these were within spec... Your taillights looks to be more flushed than mine. Has anyone brought up the same issue when they were told "within spec" and had it fixed successfully by a service center at a late appointment?

I have a galaxy note 10+. It seems like when the phone is in idle/sleep mode, the tesla can't detect it. I would have to push any button on the phone for it to finally be detected and open. I'm not sure if there is a workaround other than keeping my phone awake at all times so I don't have to...

I'm suspecting this was a car that was previously rejected (vin#22xxx, built 6/20. I put the order in on 6/16 and was delivered on 6/28 (PUP). I took delivery in their Costa Mesa, CA location but they moved it on the 6th floor of a random parking garage. It was overcast and dark so I didn't...

I reported it before the 100miles. I'm not sure if they can fix it via paintless dent repair. Let see what they tell me at my appointment next week.

Hello, can someone confirm the two pronounced bumps are normal?? It is located near where the hatch and bumper meet beneath the license plate holder as shown below. It looks like someone drilled a screw on too tight and made bumps on the hatch....

Well, I took delivery this past Sunday. While the car was not perfect, I still decided to take delivery. Rear tailights and a door was not aligned. Also there was a little dent near the rear wheel well but the paint was not scratched. I figured these were easily fixable by the SC. I...

Hey all. First time Tesla owner, expecting delivery at 2pm PST today. I contributed to the project and entered my details. I'm excited and terrified at the same time due to these build issues I keep reading about!