Search results

I wanted to provide an update and share what was replaced to help resolve the issue. Hope this helps someone experiencing this issue. 2ND ROW EASYENTRY TRACKRELEASE ACTUATORASSEMBLY - 7-SEATER- RIGHTHAND(1098542-00-D) Technician found EZ entry actuator cable to be broken . .This was causing...

Thanks for the feedback! I submitted a service request and have an appointment scheduled. This will be an out-of-warranty repair so already hit with the $265 first hour of diagnostic fee. Let's hope they can replace the part that is broken and not the entire seat.

Did you resolve the issue? Our passenger-side seat is no longer sliding forward after pressing the shoulder button. It only folds forward. Normal operation is when the shoulder button is pressed, the seat back folds forward and tracks release to allow the seat to slide forward. When pressing the...

Got it, thank you!

Very nice, thank you for sharing! What leather material did you go with?

If you don't mind the drive, check out 714 Tires in Westminster. https://www.yelp.com/biz/714-tires-westminster I take my X and Y here for alignment and tire services. Was just there yesterday to have the n2itive alignment kit installed on the X. In and out in a few hours with alignment dialed...

Give Son a call @ Onsite Wheels, in Garden Grove, CA. 5-star reviews and have experience with Teslas.

https://www.714tires.net/

I too had the N2itive Alignment Kit 1 installed a few weeks back on a 2018 MX P100D. Wow, what a difference. Similar to ckwong's feedback, the car feels much smoother and more responsive to turns. I'm told it's due to the stiffer/firmer bushings in the N2itive kit, you defiantly feel the...

I think it's the luck of the draw. I too like the clean look of no front plate, but I was pulled over for no front plate a few years back. I was waiting to take a left turn at the light and the cop saw me from across the street, waited for me to make the turn, got behind me, and pulled me over...

Thanks! Much better compared to the stock MYP setup with the 21" Uberturbines. Our MYP is 09/2020 build, not sure if they have made improvements in the 2021 and/or 2022 years. Alignment was done 2 weeks after the Ohlins were installed. Rears are set to -0.9 L&R camber, and fronts are at -1.4L...

Ohlins R&T and Redwood rear camper arms installed. More info and photos here ;) Thank you Tom and the amazing team at EAS! 2020 MYP (09/2020 build), 31,852 miles Wheels & tires: Vossen HF-5 in satin black finish, 19x10 +40 square setup w/ 275/40/19 MICHELIN PS AS 4 (@ 42 psi) Suspension: Ohlins...

These photos are not as nice as Tom's but I was able to take a before and after. BEFORE: AFTER:

Thank you Tom and the amazing team at EAS for making this happen!! It was definitely worth the wait (4 months). 2020 MYP (09/2020 build), 31,852 miles Wheels & tires: Vossen HF-5 in satin black finish, 19x10 +40 square setup w/ 275/40/19 MICHELIN PS AS 4 (@ 42 psi) Suspension: Ohlins R&T...

I am interested in the (2) mats that would go on the back of the 3rd-row seats. Please see the picture below. Let me know :)

I am interested in the (4 pieces) cover mats in the first photo. If you are willing to part and ship to CA 92708, please let me know. Thank you!

I went with black for the e brake caliper. Stock for comparison:

Give Son a call @ Onsite Wheels, in Garden Grove, CA. 5-star reviews and have experience with Teslas.

Thank you for the update! Sounds like I'm in the same boat. I don't mind having to remove the TO system but I'm not confident Tesla Service >.< I too will hope future OTA updates will fix the issue. Not a deal breaker, just slight inconvenience.

No. I haven't had time to contact Raymond and just been pulling down on the latch to close. The button works sometimes but very random. I'll try reaching out this week.

I'm looking for a sporty-er look with wider tires. benefits may be (and a big MAY BE) better grip, traction, appearance (what I'm after), a bit more wheel protection (this was my fault as I shouldn't had gone with 255 on a 10" width wheel, but I was concerned about rubbing). I suspect range may...

No wheel protection as the tires are a bit stretched. It will be better when I replace the tires with 285/40/19. Ride comfort def improved compared to the 21" that came with the car. Here's a picture of the tire stretch, very little wheel protection.

I did the same, unplug and left it overnight, plugged it in the morning and it was working then stopped. It was working sporadically but now nothing. We got used to pulling down on the latch to close, but would be nice to use the button. Please let me know if you get a response from TO. Thank you!!

Give Anderson a call and he can give you a quote. I’ve seen a range form 200-800+

I had the calipers powder coated @ Corsa Motorsport. If you are local, hit up Anderson, great guy. There are mobile services that come to you as well. They prep, mask and paint them on the car.

I reported this issue few updates back... I am experiencing the same, the frunk button was working on and off, now it's not working at all. Any update from Raymond / TO?

hmmm.. I guess something changed :confused: I see now they are requesting the plate and last 3 digits of vin of a currently registered vehicle. Maybe others can chime in.

No. We requested our personal plates before receiving our car.

I placed the HOV stickers on these precut PPF from Amazon then on the car. :)

Nice.... any rubbing/clearance issues up front with the 285? Assuming the car is on aftermarket suspension, what was changed/added?

FYI, check cashed on 04/07, received decals today 04/15.

Another vote for 275. I am running 255/45/19 on 19x10 but will be switching over to 285/40/19 on next tire replacement. 255 on 10" wheel is a bit stretched.

Not sure how far this is from you, but worth a look. Onsite Wheels, in Garden Grove, CA. 5-star reviews and have experience with Tesla.

same and check was cashed yesterday as well. will update when it arrives.

No. On oem size 255/45/19 but will be switching over to 285/40/19 on the next tire replacement.

Yes. 19x10 +40.

Need a 1"-1.5" drop... but here how she sits for now.

Love it! Super clean MYP! Almost pulled the trigger on the Titan 7 that came off a M3, but ended up going with HF-5.

Oh and if you are thinking if 3 seats will fit in the back, it can be done. Check the link below. The seat protector linked below was also mentioned, more options to consider. https://www.amazon.com/dp/B00B7M7BKW/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref=ppx_pop_mob_b_asin_title

I've used these in multiple cars and they work great! Budget-friendly ;) https://www.amazon.com/gp/product/B011L86UVM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

So I reconnected the power connection after the car woke up, reinitialized as per STEP 8 and the emergency button worked. Opened the frunk to place back some items, go to hit the emergency button to close, nada.... Took the tub out to inspect all connections, everything is tight and nothing...

Hi it's me again... so it turns out the emergency button is no longer working. I've tried unplug and plug the emergency button, nada. I've tried reinitializing follow STEP 8, no luck. I've unplugged the power connection (from battery) and will let the car go to sleep overnight. Will reconnect...

Sorry for the false alarm, it must have been user error. o_O I just tried it again before unplugging and plugging back in the frunk button and it worked... nothing to see here!

Just completed the installation of the latest update (2021.4.6) and noticed the frunk button is no longer working. I can still open/close the frunk via Tesla app and onboard screen. I've reached out to Raymond @ TeslaOffer, pending response. This is on for TeslaOffer's Model Y frunk Mark 4.0...

Thanks and good to know! I'm with you on entering and exiting on a slant, but I'll need to teach the wifey to do the same :D

That looks great! 1” drop is what I’m after as well on the MYP. How’s the clearance in and out of driveways, parking lots, etc?

That looks YUM MY!! :D That wheel gap is perfect... very nice!!

Thanks! Did a walk-in at the DMV today and was able to pick up the plates. In and out in less than 30 minutes. :) Now just waiting patiently for the carpool stickers...

Placed order through DMV website on 07/22/2020, received notice today to pickup the plates at Costa Mesa DMV today.. wish me luck!

Dedicated 60A with charging rate set at 48A. I DIY'ed a swing arm to get the cable off the ground with a 3D printed holder at the end.