Search results

Private email.

Last week, TSportline said Alphrex's new ETA is early May, but might come late April.

Confirmed. F207 is switched with Sentry mode on. Once I close my doors, it shuts off. Thanks everyone this was very helpful. My car is a 2018.

This marketplace listing has expired and has been removed.

This marketplace listing has expired and has been removed.

I ordered the kit a couple of weeks ago. After talking to a couple of the guys here, they said to order the parking sensor brackets from Tesla and install them on the PD bumper. As you mentioned, the holes should be pre-stamped.

This marketplace listing has been removed.

Yes. I already have them boxed up and ready to go. UPS ground and the box dimensions are 23x23x13. Buyer pays for shipping.

This marketplace listing has been removed.

This thread is for the general discussion of the marketplace listing 21" Tesla Model S wheels. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing (4) Tesla Model X Cyberstream FRONT wheels. Please add to the discussion here.

I have these (4) front 20" Cyberstreams for sale if anyone is interested. No curb rash, bends, or tires. $750.

Anyone know which sideskirts these are?

How long did it take you to install the rear lights?

Can you please post pics of your car and the TE37 Ultra M SPecs?

Surprised no one here seems be trading miners... Here's some gains since last week. The YTD gains are beyond crazy. With the Blackrock BTC spot ETF around the corner, it's generating so much FOMO.

Anyone trading bitcoin mining stocks? I have MARA, RIOT, BITF, and CleanSpark. High risk high reward.... heavy emphasis on high risk.

What was the Tesla part number? I had a hard time finding this and resorted getting a less than pristine one from Ebay. Cost?

Get carpet mats. There’s a reason why you don’t see water proof mats on a bmw or Mercedes.

Judging from the AlphaRex website for the model 3 and Y, I chose "red smoke." I'm guessing the S taillights will have a similar appearance.

Tsportline is having a pre-Black Friday sale for 15% off and free shipping. I ordered the tail lights for now. No affiliation btw.

Does not rub believe it or not.

Went from the 666m wheels to the Cyberstreams….

https://tsportline.com/collections/new-products-tesla-model-s-exterior

Yes, I’m already running extended lugs.

Well... I found a guy to source me (4) FRONT 20" Cyberstreams. I'm probably going to run a 25mm spacer in the front and 15mm spacer in the rear with 265/35r20s. Final offset will be: 20x9 et15 (with 25mm spacer) 20x9 et25 (with 15mm spacer)

@MFrunkerOG Do you have pictures of your car with the cyberstreams?

Quick question. How did you achieve this 2 tone look? Did you paint the entire bumper white and then paint the the middle portion and foglight area black? Or did you paint the entire bumper white and use black vinyl to cover those areas?

Thanks for posting that... The retrofit seems reasonable to me.

EVOffer posted this on Instagram...

That's fire. Where'd you source the Prior Designs front bumper? Did the shop have a hard time installing it?

Thanks for the information. I really appreciate it. I'll definitely hold off any changes to the front suspension for now.

Less camber and running 2.5% smaller tires front and rear (255/35/20, 285/30/20). I am running smaller tires because I think it looks much better IMO. 20x9 et29, 255/35/20 20x10 et40, 285/30/20 In the rear, I was running 295/30/20 with a 7mm spacer, but after reducing my rear camber from...

I realize that I am probably lowered more than most, but can someone recommend any front camber solutions? The alignment shop said the best they could do was -2.02 and -1.96 degrees of front camber (+0.10 total toe). My front fender arches are approximately 675mm from the ground. Should I try...

For those that installed the TOE arms, did you have to cut the inner bolt? Can someone please confirm it's #9 in the picture? And is the best way to get it is to go to the Tesla dealership since they never answer the phone?

Subscribed.

BMW 666M OEM competition wheels from a F80 m3/m4. They normally come in silver but these are shadowline. OEM quality and forged from the factory. 20x9 et29 fronts wrapped in 265/30 and 20x10 et40 wrapped in 295/30.

Took a page from Hotboi’s playbook.

They are basically the same thing but I do prefer the N2itive ones should have bought them the first time around. They function the same, but while adjusting each side, it's much easier to spin the N2tiive ones and refer to their measurement markings vs trying to use my digital scale.

Got my car fixed today. Bill came out to $300 or so and literally took the mobile tech 20 minutes to fix. Not bad at all and was completely satisfied with the work.

I finally won the trunk-won't-open lottery too! Car is a 2018 100D.

As a vendor, I appreciate your input and I hope for your success. Do your wheels undergo a mold-form forging process like Rays or are they machine cut? The forging press that Rays Engineering uses is the biggest forging machine in Japan. Would you say your forged wheel is superior to theirs?

Good to know. But can we agree the location matters less vs “how” they are made?

I agree. But I would ask if the same manufacturing process is the same whether it’s in China or Japan. That’s why I experimented getting custom wheels forged in China but was not delusional how they compared to the molded forging process in Japan. Not sure why no one is accepting this point...

Normally I wouldn’t care to argue, but there’s a huge difference between Signature/Bc wheels vs Advan and Volk Wheels. Advan and Volk Wheels are forged pressed and you can look up their forged pressing machines specs which are the largest in Japan. Signatures are made in China and I think the...

Why so triggered?! I had custom wheels made that looked like TE37s made but by no means was I delusional that they were the same was as authentic TE37s. Tell me specifically, which part of my statement is ignorant and let's have a conversation. Jeez... Cancel culture at it's finest. :)

LOLz... MountainPass?! You're joking right. Volk and Advan both use mold-form forging process. Signature wheels are made from the same vendors as Alibaba and Aliexpress. Do you really think the machinery that Advan and Volk possess are the same ones Signature Wheels uses??? 😂 But hey, if...

2putt4, if I had a Plaid, I’d suggest Advan or Volk for monoblock wheels. In terms of quality, price, heritage, and name recognition, there’s no way you can beat that price point at the top tier. The other wheels brands you named are basically a compensation of price/quality. The resale value...