Search results

I have to do a soft reboot on my 2021 M3 to get the USB sticks to show up on the MCU since the last few updates.

I put the foam from my Soundskins speaker rings behind the 8" midbass in my doors.

I've installed a small amp (400wrms) to the OEM sub in a '22 RWD (16v car) without any issues in the car. The amp seems to be staying on all the time but that's something that can be worked on at a later date. I have a '21 Performance with a 3800wrms setup without adding a second battery. The...

It depends on what wiring is going to be disconnected. If it's an all in one unit, you need to protect the bare wires since one should be power and one should be ground and will make a bright and brief light show if they touch. If the amp is to remain in the car and only the sub/enclosure is to...

Not all 51R's will fit. I have an XS Power that won't fit. It's just slightly too big in all dimensions. Make sure that you verify that the replacement will fit.

Having used a few sets of Focal's in the past (not the ISU200) and competing with Hertz Mille's in my Accord, I would expect the Hertz to sound better than the Focal's. In my opinion, using the largest driver in the door is the best way to get the best sound up front that you can, hence the...

First thing that is suspect for me is the basic line output convertor. I would look into a quality version (like an Audio Control piece) and verify that the wiring you've used is the correct signal for the amp.

Since you've got the standard audio, it should be similar to what you get out of the midranges. I don't remember what I tested them to be, but it'll be fine for feeding most decent quality line output convertors.

I put 255/35/20 on my M3P on Forgestar wheels. No problems with rubbing or interfering with any suspension parts.

That's great!!

That stinks!! Please keep us informed of what happens. For what it's worth, my '21 M3P went to the local service center for the same issue before Tesla admitted to the software fault. They said they would not honor the warranty due to the "added weight of the sound deadening" that I added to my...

I put two Phoenix Gold Ti21600.5 amps in my '21 M3P. I did not install a second battery though it wouldn't hurt. I used the relay/resistor to make the car not respond negatively. I don't think you'll have any issues.

FWIW, My 2021 M3P with the premium audio (though all speakers are replaced, and aftermarket amps power them) does the same click but I seem to notice it happening when there is an audible indicator being generated by the computer (as in, a turn signal sound, or turning on or off of cruise...

I only did the rear section.

If I had to guess, I'd say the OEM sub box is about 0.3-0.5 cu ft, about what to be expected of an 8" driver. I was able to mount two amps and the relay/resistor in the spot where the OEM sub/amp used to reside.

I put 50% on my windshield, 20% on the sides and back window, with 35% on the roof glass.

Sorry for the late reply, I haven't been on here in a while! I used 5mm spacers from Model+ and the simply slide over the lugs and rest on the center hub bore. No suspension mods, though I'd like to get some MPP coilovers at some point in the future.

2021 Model 3P Ubers are a 20x9 with a +34mm backspace. I run a 255/35 on my Forgestar +35mm with a 5mm spacer but I would think it would fit. It seems like I've seen a few people say that a 275 would fit.

I run a 255/35/20 on my M3P and feel its the size that should've been on the car at delivery. Like someone else noted, slightly wider with a hair more sidewall. I can't comment on the PS4 or PS4S, the DWS06 fits just fine!

I'm ok with the size, I'm just not a fan of the look. I swapped to a Forgestar wheel with a 255/35/20 and very pleased. Though it might not be every 18 or 19, I'm sure you can find a smaller wheel that fits.

I agree with others, go ahead and do them all. I run a set of the amped garage adapters for my Illusion Carbon 8's in the doors, and used some 3D printed adapters for the Illusion Carbon C3CX's in the ends of the dash.

This is awesome and I'm interested in seeing how well this comes together.

I run a 255/35/20 DWS06+ on my M3P, 20x9 wheel with a +30mm offset. You'll be fine with plenty of room. You could have a set of 5mm spacers on hand from Danny at Model+ if you're worried.

I haven't had the parts replaced (my appointment was this morning but we were hit with a winter storm so I decided to stay home), but from what I can gather there is a firmware mismatch that doesn't seem to allow certain components to update with the rest of the OTA update.

Here are a couple of pics of a 20x9 +35mm with a 5mm (net +30mm) with a 255/35/20

Excellent!! I dig my Illusion Carbon 8's to mate up with my SQL-15!

I'll try and get some pics, but it should move it away from the upper control arm.

I got a set of these from Danny at Model +: Stepped delete spacer

A 255 is what should've come on the car from the start, IMO. Let see if these work...

I run a 255/35/20 Continental DWS06 on my 2021 M3P. No problems with fitment, using a set of Forgestar F14's in a 20x9 +35 with a 5mm spacer.

I recently went with a 20x9 +35 Forgestar F14 in bronze on my MSM M3P. I contacted Danny at Model+ for some info and he was very helpful (even though I didn't buy the wheels from him). I went with the 5mm spacer with a 255/35/20 Continental DWS06. I was able to get the BT TPMS sensors from the...

I am setup for Advance, but according to Service there is an issue with my specific car that needs some part(s) to be replaced to get the update to work on my car.

I've had many attempts to install the new software, even going so far as to request assistance from Service. I initially had a mobile appointment but that has been escalated up through the Engineering team and now have a service center appointment to have some parts/pieces replaced. Hopefully...

I've bought a few parts from the company over the last 6 months or so since I got my M3P, and my results have been flawless!! Shipping has been relatively quick considering I live in Tennessee, with all products being packaged well. If I've ever had any issue, Chad was excellent to deal with and...

I'm not sure there is anything that is supposed to come out of that speaker aside from possibly some chimes or other vehicle based information. I've had all of the "normal" front speakers unhooked and had no sound coming from that individual driver.

During the process of installing my new speakers and amps, I had to drive around for a few days with no "front" speakers, only the tweeter for the center and the "height" tweeters that are in the headliner at the top of the a-pillar. They do make some noise, but not very much, and like you've...

The USB A in the glove box will read music (and is intended to be used for dashcam and Sentry), and the two USB C ports at the front of the console will read music. The rear ports are charge only.

Yeah, sorry. I changed it on the other post.

My plan is a 20x9 wheel with a 20mm off set, 245/35 tire. Not lowered, stock M3P height. I know some people have used a spacer and given offset wheel to achieve the 20mm offset but I haven't heard of anyone doing this size and spacing natively.

I've at one point gone through all 200 some odd pages and possibly missed it, but has anyone used a 20" wheel with a 20mm backspace on the front of a M3P? I want a specific wheel (and the original plan was a 30mm backspacing but they seem to be on an indefinite backorder) but a 20mm version of...

Welcome to the site! I won't try to sway you in one direction over what you've already chosen, but like you I sold a 2018 Leaf SL to buy a M3P, and never looked back!! Honestly, the current owner of my old Leaf has told me he will buy my M3P when I decide to get rid of it!

I've had mine for sale since I got my M3P at the end of March. They are better looking in person but still not my favorite wheel.

I live in an area with 5G Verizon service and my 2021 M3P only shows LTE.

Mine worked for a time in my 2021 M3P but recently started giving me the "format drive to use the dash cam" (or something similar). I've got a 1TB with two partitions for music and teslacam. I can only assume it's due to a recent software update.

Or you could do like I did and remove them completely! Front and rear T's are gone along with the Dual Motor badge.

Add me to the list of those using the Abstract Ocean protectors. I had mine before my M3P was delivered!

Yes they are! Feel free to email me at mlashlee2 at gmail dot com for faster response!

I've got a set with just over 5k miles on them. I'm in Tennessee, I'm not sure how that will work with shipping...

@Sandee3 I'm glad you're alive and well but I'm sorry that you've gotta go though the process all over again!

What I've done is to save my most listened channels as favorites and simply switch between those channels using the favorites tab of the app. Kink of clunky and a big oversight in my opinion to omit SXM, but it is what it is.