Search results

I believe the 24s have the new HWPA housing.

Posted an update :)

Got it fixed. Tesla is aware of the issue, but the service department needs to be specifically informed. I let them know that there is an issue with the OEM HEPA filter housing and that the new upgraded one is part number 170575-00-C. They replaced it with the new housing and a new HEPA filter...

My apologies, wasn't meant to be mean. The thread shows alot of information. I did try the vinegar but it didn't work. I had to then deal with the vinegar smell so I didn't know which was worse ha! Tesla ended up replacing the HEPA filter and the new housing all under warranty. I also purchased...

Did you not read this thread?

Yes. I took it out and cleaned it but ended up talking to Tesla and they agreed to replaced the housing to the new one along with the filter under warranty.

Just PS4's. Issue really isn't the tire just the size indifference apparently is the issue.

200AA. They're the Michelin PS4s.

Considering all the pads I ever purchased for my other cars it is haha. My AMG pads were under $200.

That is absurd. I went to the autostore and got a pack of Dorman 965-013D washers and installed 2 on each bolt. Literally took me 30 min to do it. Yes, you will need an alignment after as it will move your toe. Ive helped alot of people with this so let me know if you need assistance.

I used washers from the auto store. Worked perfect and its a 30 min install including take off and putting back the wheels.

I have a hard time spending that much money on just pads. Crazy...

True. I'm just speaking on the most common issue. I did post a screen shot from Tesla about the issue.

wow, that is absurd, 4th time? lawd...

The only ones I hear/read about are the same ones I and alot of others experience around the 40mph mark. Which other vibrations are others having?

But it is. I and tons of others have fixed the issue by lowering it. I lowered mine and it went away. I put new wheels on and one of the lowering links bushings went bad. I put the stock links back on for a few days while the new ones came in and the vibration came back. New links came in...

Yes

Thank you sir! Perfect, I hope that will fix the issue. I was going to email you just to make sure.

I have 265/40/20 on the front and will get 305/35/20 on the rear. That OD is near perfect and also same OD as the 21's to keep the speedometer with the correct speed. I'm really hoping that will cure the spinning.

Here are my 20s. Love the looks and the fitment but I have an issue. I had the oem 21s which worked great. When I went with the 20s, I got 265/40/20 PS4's on the front and 305/30/20 on the rear. The car spun BAD, even at the track that was prepped. When I fixed the camber issue the tire shop...

Exactly. My wife works for an insurance company and she said insurance companies are starting to crack down and needs to be registered where the primary residence is located.

Lower the car and the vibration will go away.

Thanks, didn't put "tesla" after it. Obvously been on it before just looks like everything is for 2020 or older even though it says for 21+. Thanks for the explanation.

What is EPC parts site? I googled it but alot came up.

Ahh yes, my apologies.

I went the shim rout instead of getting adjustable camber arms. I'll never need to adjust them. Was a 30 min install and has been working great.

Ya, they did tell me that if the sensor had even a rock chip on it then it wouldn't be covered. They had my car a week and just got it back yesterday. I explained the error was intermittent. They drive it 2 miles and said they couldn't duplicate it. Soon as I pulled out onto the street, the...

So my 21 Plaid has of course the same issue. The smell goes away after about a minute. I removed the HEPA and it didn't smell to bad but soaked it with a vinegar/water mix and its now sitting in the sun. When it's dry, I'll spray some Lysol to get rid of the vinegar smell ha! Looks like I will...

So my 21 Plaid has of course the same issue. The smell goes away after about a minute. I removed the HEPA and it didn't smell to bad but soaked it with a vinegar/water mix and its now sitting in the sun. When it's dry, I'll spray some Lysol to get rid of the vinegar smell ha! Looks like I will...

No, the subject is about the vibrations at lower speeds. The washers I was speaking about is using them behind the camber arms instead of the N2itive camber arms, not to push the wheels out more.

Use washers.

Nope, didn't rub at all. You will need an alignment after because it will move your toe out. I went to the auto store and get the Dorman 965-013D washers, used 2 on each bolt. If you do this, let me know and I can provide help on how. I figured out a way to get it done in about 30 min and that...

Not to new here but new at posting. This is my 21 with new wheels. These are BC Forged 20s. Lowered with N2itive links set -7/-7.

Not that it happens on "hard" acceleration but normal driving.

If you like the look, lower it.

Ya that's strange, I never had an issue below those speeds. It was for sure annoying.

I'm probably speaking of my racing thoughts as I set my pinion angle myself on my race car. To me that makes total sense to me when lowering a vehicle. Either way, lowering it worked perfectly.

35moh-45mph

I was interested in doing this for my 21 Plaid. Hardware is the easy part. Knowing someone with toolbox to do the update is a whole other story. Also, if you can actually do this and get it to work, if something happens to the screen in the future, Tesla will not warranty it.

Vibration comes from the axle geometry. I had the exact issue till I lowered my Plaid. Went away. Few months later after I put a set of 20s on, the front right lowering link had an issue. So while they were going to send me new ones, I put the stock links back on. What do you know, the...

I'm looking in doing the same for my Plaid. Goal is to get better times at the track. How much did you get them for?

Had my 21 Plaid at Tesla for a week and they gave me a brand new Model S LR. Of course I moved the screen and loved it! Got back in my Plaid and got sad face. Now I want the screen towards me. I may try this.