Search results

Oem 245/45/19 rubs sometimes up front... as 255/45 on R20 is much taller/wider, I dont see how this could work

https://www.audiotec-fischer.de/en/helix/speakers/compose/flexmounts/cfmk200-tes-2-fdm

Best way how to enjoy your MS is to get over that hunch that it is a luxury vehicle... it aint...

Thx guys, I managed to scroll down to that particular tricky menu and choosed "chill down options" and it seems just right :) FSD is not what it says here?

Hello, I'm somewhat new to the Tesla world, so I may be asking a little naive. MS 2017 with AP, MCU2, side cameras. Is the following behavior normal? I am driving on ACC and the camera sees a slow moving car in front of me turning right, assesses it as an obstacle and brakes hard. The guy...

Honestly? Our Bmw 335iA my 2006 has much better ACC (not stop&go) than MS my 2017... previous MB w205 2017 (ACC with stop&go) also more refined, less erratic behaviour... lastly the rented VW T-Cross 2021 ACC worked flavlessly compared to our MS which acts rather harsh, brakes suddenly...

Any update on this? Should I not bother to swap the dummies for real fog lights?

Yes, cause there is the chiller, that robbs "the AC coolness/power" to cool down the battery pack... hence the cabin cooling capacity may be reduced... I doubt that it is normal case, perhaps you are already having a bit low pressure in the AC system?

If those side louvers are open, logically the air will take the path of least resistance and there will be minimal flow through the center radiator, so YES, they have something to do with cooling the battery/drive.

There 2 vents, each in front of the wheel, right behind the AC condenser... and the air enters either from the central opening OR via side louvers... in the central part are 2 flaps that control the amount of air/flow passing throught the water cooler AND leaving throught AC condensers into the...

Helix sells special adaptors HELIX CFMK200 TES.2 (FDM)

Helix also sells ready2use adapters for 8´´ front door woofers in case you need them HELIX CFMK200 TES.2 (FDM)

Are we talking about MX? Anyway, once you have the system as described above, I find it hard for her to complain :-) It really fills the space... The only desire left out is the low end spectrum (200 mm wont go much lower than 40-50 Hz... as let say 10´´ subwoofer covers with easy 25-80 Hz).

I see THC d0018 Active Aero, 0014 coolant, 0012 presSnsSuct, 0011 presSnsDis, 0010 compressor, 005 lowFlow Should I set it on fire and runaway? Car had a very minor frontal crash - damaged water cooler and pinched hole in the left AC cooler, so water and the refrigerant systems were low/empty...

On top of this selfexplanatory pictures - the depicted unit on the right must be for the front handle as my rear did not have the swith in the handle itself (see the black wrapped cable routed to the top/middle part of the handle - I assume some pressure/micro switch), instead the plug has...

I dont know for sure but I have swaped the whole LED light from another car and it works without any sw / voo-doo matters...

Kindly be aware there are at least two different version... not much to fix on the later on the right...

MS 2017 has the version on the right... It has stopped going back last night, so I took it out, no obvious reason, put i back and it works...

In case that you have the newer style...

Any reputable Hi-Fi shop/specialist will confirm this - skip rear speakers, spent money on front only... Properly tuned 3 way active system sounds much better than any of those 3D, surround etc mimics... as a matter of fact, the 2nd row (or rear door speakers) do next to nothing when it system...

Part of it… I first took the easy approach (deadening of doors, replacing oe 6,5” woofers with Audison 3 ohm/93 dB) just to learn about “not exactly 3 ohm/93 dB reality”… the sound was low bass volume (although more accurate)… after some thinking I decided to do it right with DSP processing...

I plan to run R19 front and R20 rear (MS and MX Slipstream combo)... so far I dont see any issues as long as the wheel diameter matches...

Some low res pics for those that dont like to read :-)

Helix 10 DSP - 10 chanell amp with 3 way active Helix component speakers sloved the base music trouble :-)

Helix Match 10DSP (10 chanel MATCH UP 10DSP 8 x 65 Watts at 4 Ohms and 2 x 90 / 160 Watts at 4 / 2 Ohms at the Sub Outs) in 3 way active Helix speakers (added mids to dashboard, better tw in A-pillars and replaced 6 to 8" kickbass in front doors, others - center and rear doors get reduced/eqs...

I'd start by taping all the gaps in the trunk lid. If the noise is still present, it's more likely mechanical (e.g. differential bearing, wheel hub?).

Why not try the felt tape instead?

Hi, does anyone have experience with the following errors? Aero and louvers I understand, but 0014 coolant (is it topped up), compressor (AC or air?) and lowFlow is for water or AC? Suction and discharge are also ac related? The AC system works normally (in the cabin and when recharging).

Anyone tried putting front Model X wheels on the rear axle only? Leave the front 8x19 et40 with 245/45 tires and use 9x20 et35 with 255/40 tires on the rear. Aside from aesthetics, this will also have better handling characteristics (might hurt rear comfort and reduce slightly range - because of...

Apparently it does matter (open v. closed) as I took it apart once more, has set them open and assembled it all together. All are working well now. Prior to this - errors and no movement.

See attached MY soft-close over MS locking mechanism - clearly one can connect pulling line to the hatch lever where the spring normally sits… the issue is to redo the bracket for the motor and space both parts correctly to synchro entry point with pulling action… 2be continued :-)

How are you suppose to place them back in? Open or closed? Or it doesn’t matter as the actuator can turn in both direction during the initial test? Thx

It is more of an advaced Lego than working on a car... basic steps, taking things apart, sort what parts you need, get them online, make them fit, painted, done... lot of plastics (cooler tray, fins, louvers, tow cover), blade motors, bumper harness are on AliExpress too...

For those of us (with base interior lights) who are afraid of the futile efforts of one LED in the door to overcome the darkness... 3x smd led 10´´ strip on alu profile with transparent plastic cover, connected to oem wiring (under the rear lights under the carpet there are connectors, I used...

Has anyone attempted to retrofit/diy softclose to this lock/catch mechanism? You can get it on AliExpress for 2022 MS or 3/Y for under $100.

I have tried to replace the base front 16 cm speakers with Audison AP 6.5 2 Ohm/95 dB only to find out that it doesn’t work well. Low bass/volume (note - Audison and Hertz state sensitivity at 2,83V instead of regular dB/W/m which in the end turns in pretty much the same levels as other...