Search results

Just install them is all I've ever done they start working after a few miles. I got take offs from ZevCentric: https://zevcentric.com/collections/tpms

The 2018 use RF TPMS the 2023 uses Bluetooth TPMS

Wheels are off the car and ready for sale. I also have the following if anyone is interested: 1. Brand new Uberturbine setup 2. A set of Gemini wheels with 255/35R19 DWS-06

This thread is for the general discussion of the marketplace listing 20x9 brushed clear forged wheels + MPS4S + BT TPMS. Please add to the discussion here.

Interested in shipping the wheels or wheels/tires to California (91320) and how much?

To this point I have only done Tesla Corsa's but would like to get more track time, I need the practice. Buttonwillow and Willow Springs are close but when I review theirs and Speed Ventures calendars it is not easy to tell what HPDE days I can join? For those of you that track your EV in my...

My trip setup is the Tesla Gemini wheel which is 19x9.5 +45, I run 20mm F and 25mm R spacers. The tire is the 255/35R19 Continental ExtremeContact DWS 06 Plus, the look is about as stretched as I can stand but that is a personal preference thing. Due note the section width varies per tire brand...

The polished wheels in my profile picture are my street setup, VS Forged VS-02 in 20"x9" with staggered offset +35f, +26r. The bronze wheels are my track setup from JOVA, 19"x10" square +37 (which is to much... should have done +35 or less).

whirring noise is probably just the motors. As an experiment with zero regen the motors should not make the sound when decelerating. There is no easy way to disable regenerative braking but charging to 100% SoC used to do it.

Thanks for the feedback, going with the Supercar 3's as I sometimes wear them on the drive to the track so longer wear will be nice.

I am ready to replace the inexpensive tires (Bridgestone Potenza S007 in 275/35-19) I got to confirm I enjoy Tesla Corsa events. Running 19" x 10" +37 track wheels and MPP CA with about -2 deg camber all around. During my research I was really leaning towards the Goodyear Eagle F1 SuperCar 3...

I have been to 3 Tesla Corsa with this BBK and two of them with the rear Essex jhook rotors if anyone has any questions. My times are still slow but as I have been improving I am working the brakes harder and harder but they just do their job, never any fade plus excellent street manners. Do...

What would you recommend for track days for a beginner? This will be my second set of tires as I've almost worn out the Bridgestone S007 in 275/35r19 that were very inexpensive. I am trying to decide between the RE-71 in 275/35r19 vs the supercar 3 in 265/35r19 My M3P track wheels are 19x10...

What are the California track day opportunities once I graduate from Tesla Corsa? I am close to Willow Springs but the schedule of events is confusing to a newb. Also is mixing with all types of vehicles hard to adjust to?

I did this research a few years ago, decided on VS Forged VS02 20x9 staggered offset +35 front, +26 rear, less than $3k but loooong lead time. The others on my short list are: * Signature * Martian * Titan 7 * APEX * MPP Mega Mesh

This marketplace listing has expired and has been removed.

I wish I was local, can I see some photos on the car, the offsets look perfect with a little more camber than stock.

All the times are available here: https://racehero.io/events/gridlife-laguna-seca/results

If you really want to use amazon, these look fine, 20 lug nuts for $23

You can pull the adapter that is currently plugged into your mobile connector out and replace it with the other one depending on which electrical outlet you plan to use.

BTW, I had a similar question a while back that I asked Essex, here is the email exchange, hope it helps. Me: @JRitt

The Emotive site has rear rotor offerings and a good blog post of the differences: https://emotive.engineering/blogs/the-logbook/tesla-model-3-brakes-upgrade-guide#oem-specifications-model-3-standard-range-long-range

The factory lug nuts are open end, closed in look better, if you don't like seeing the studs: https://lugnutguys.com/collections/lug-nuts/products/2012-2019-dodge-ram-1500-14x1-5-original-style-black-lug-nuts-new-set-of-20

I made the drive out on Friday prompted by this initial post and had a great time, Laguna Seca is an awesome track. Every single driver I met was extremely gracious with their time and the MPP suite was a nice respite from the noise and sun! Watching Model 3's fly down the corkscrew is a sight...

I have purchased more lug nuts than I am willing to admit, mostly because I have a wheel/tire addiction, here are some resources in addition to Amazon: 20 PC 14x1.5 OEM TESLA REPLACEMENT OPEN END LUG NUTS 21MM HEX TESLA MODEL 3 ZINC | eBay Easy Shopping for Lug Nuts, Wheel Locks, Tires, Wheels...

Use a 1/2" breaker bar to remove the lug nuts and to install them. Then the last step is to use a torque wrench to get them up to the 129 lb. ft spec. But as others have suggested, watch a YouTube video to learn the whole process, including where / how to jack up a Tesla, rechecking the lug...

I use a set of Continental ExtremeContact DWS 06 Plus for long trips, they don't seem any louder than any of my other setups and get me better efficiency than my Pilot Sport 4S, worth a look and a little less expensive.

19x10+38 wearing 275/35R19 Bridgestone S007 with aftermarket rotor hats on performance hub has about 3mm clearance after filing down the casting protrusion on the upright.

I was happy with my Ohmmu purchase, it is considerably lighter, will last longer and has the potential to let the audio system perform better. Yes I had to do a few resets over the years on the original model but they also just sent me the latest version for free so they are a stand up company.

Cce32 posted a new question on the marketplace listing Signature Wheels / Hankook Tires.

What? I had my 2018 Model 3 wrapped and never had an issue. I mean it is 8mm of polyurethane over an ultrasonic sensor which is it's self behind plastic painted to match the rest of the car body. Gotta say I have head some uninformed Tesla employee statements in the past but this ranks up there...

Got an offer for $28,500.00 which I accepted.

Can you post a pic of the car from the side so we can see the wheels?

Ventura County

Bump

I did the FSD transfer to an inventory car a couple hours from me because it was $4k less expensive and Tesla payed for the Uber. Although I do still have my original car because Carvana/Carmax offered $24k which I thought was bad :-|

You probably already know this but there are lots of good choices for tires: https://emotive.engineering/blogs/the-logbook/tesla-model-3-19-sport-replacement-tires

This thread is for the general discussion of the marketplace listing Brand new takeoff 20" Uberturbine wheel and tire set. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing KW V3 coilover kit for Tesla Model 3 AWD. Please add to the discussion here.

I saw this prototype at the most recent Tesla Takeover in SLO https://lightshiprv.com/

I sent u a DM Sep 1st asking if you want to sell the 4 rear arms.

2018 Model 3 LR AWD with 20x9 265/30R20 MPS4S 283 Wh/mi for 35k miles

I feel the same thing as the OP describes when entering a parking lot sloped entrance as a slight right. This habit of not turning hard and going directly into the drive way but to drive at an angle across the entrance is from year of driving lowered cars.

Excellent seller

Still available?

My experience confirms this as my original car now only has basic autopilot. The way Tesla explained it to me is the early FSD purchase was an upgrade to EAP.

My problem with 19's is the tires so might attempt the same but higher up on the upright. Seems to only rub under extreme cornering, I had no idea how much a tire moves in the horizontal direction, in retrospect I should have been less aggressive on the offset.