Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

FS: Unplugged Performance Carbon side skirts

This site may earn commission on affiliate links.
I’m looking to sell my UP dry carbon fiber side skirts. Retail on these were $2,995 when purchased. The carbon fiber side skirts I believe are no longer available on their site. Those of you who aren’t familiar with Unplugged Performance, they are based out of California and have been developing high quality parts for Tesla’s for quite some time.

Asking $1500 (located in Houston, TX)

Teeorxz.jpg


They were installed on my p85+ for roughly 1.5 years and I’ve since sold my vehicle so have no use for these. They are extremely light weight, durable and give a sporty look to the model S.

This does include the aluminum L bracket hardware and plastic rivers required to mount them on, but would recommend getting a new strip of 3m heavy duty tape since it’s one time use.

There is a small crack on the left side skirt as pictured, but the crack does not go through from the back side and can be repaired fairly easily. One of the inner mounting tabs on one of the side skirts were damaged during removal, but should not affect the mounting too much if proper installation is followed.

Feel free to PM me if you have questions or need additional pictures
 

Attachments

  • 17AB25C8-9605-4AFB-A385-15AC90A517EF.jpeg
    17AB25C8-9605-4AFB-A385-15AC90A517EF.jpeg
    388.1 KB · Views: 188
  • 72A2D5E3-F5CA-443A-9488-64F96F2A3E06.jpeg
    72A2D5E3-F5CA-443A-9488-64F96F2A3E06.jpeg
    282.3 KB · Views: 168
  • 6FA715E7-7E36-49DA-9609-8B33FEA60A8F.jpeg
    6FA715E7-7E36-49DA-9609-8B33FEA60A8F.jpeg
    605.2 KB · Views: 157
  • 6BB3FA03-E6AB-432D-8AA7-287CBE441A69.jpeg
    6BB3FA03-E6AB-432D-8AA7-287CBE441A69.jpeg
    802.1 KB · Views: 173
  • Love
Reactions: P85_DA
thanks! They look great on your car. Where the skirts that were on the red carbon fiber and painted gloss black?

They were actually finished in a Gloss Carbon Fiber finish. As I recall that might have been non-standard but "custom ordered" just for me as I had all the other CF bits on the car in gloss CF. So I wanted it to match. I just recall they were the most expensive parts on the car of all the CF bits, as best I remember. But yeah... they were the UP dry carbon, with a custom gloss finish.