Recent content by EasyPal

I was told that the tiny rubber seal gap on the roof glass will not cause leak or wind noise. My wind noise is most likely caused by the front RH window, which totally sticks out comparing to the B-Pillar. Another Service Appoint is needed.

@EvilStryke, what did Tesla SC say about the "rubber seal gap" on your windshield? My Mobile Service appointment (to replace liftgate LH support strut) was pushed to next Monday. I will ask the service person about the rubber seal gap on my roof glass.

It looks like some clips are not secured inside the trim.

I also tried the "foam" fix, which reduced 80% of the rattles. I guess some other rattles are due to the movement between the clips and metal base inside the trim. I am trying to use the method in the YouTube video: and the first 1:30 of the following:

Any solutions besides the foam "fix" by @Interplanetary? I found mine makes rattle noise on both sides. I am thinking about applying felt tape but the edge is too thin to adhere anything on it.

@EvilStryke Tesla replaced my Model Y's roof glass under warranty repair. Roof and hatch are flush now, The waved wind noise (air buffeting) is gone. However, there is this excessive wind noise above 25 mph. There is also a rubber seal gap on the roof glass - 2022 Model Y LR Wind Noise.

Tesla replaced my Model Y's roof glass. Roof and hatch are flush now, The waved wind noise (air buffeting) is gone. However, there is this excessive wind noise above 25 mph. There is also a rubber seal gap on the roof glass. I cannot feel the boom because of the wind noise, or the boom might be...

Tesla replaced my Model Y's roof glass. Roof and hatch are flush now, The waved wind noise (air buffeting) is gone. However, there is this excessive wind noise above 25 mph. There is also a rubber seal gap on the roof glass. @EvilStryke I noticed your message in 2022 Tesla Model Y cabin noise...

We are waiting for the parts to arrive in 1-2 weeks.

Tesla SC agrees to replace roof and hatch glasses.

I got lucky this time to have a chance to test drive with a technician. We also did a comparison with another Model Y. It's agreed that the wind noise is abnormal, both roof glass and liftgate glass will be replaced... waiting for parts now. After that, I will deal with the rumbling noise with...

Thanks!

I tried to cut and sand PVC cap so that it can fit in the rubber tightly and touch the plastic bolt. I also made a 2mm washer so that I try out different length. Which picture looks right? Pic 1 or Pic 2? With PVC, the hatch definitely has very little room to move. Somehow I cannot get the...

I used 1/4" OD tubing. Tried 5/16" OD and noticed the larger gap from the panel. I also used the envelope method to make sure the hatch stops evenly and tightly. But I can push with normal weight to move the liftgate visibly. I don't have a 3D printer, but I can refer to your 3D Printed Rigid...

Appreciate your help! I just messaged them to state that it should be under warranty. Should I "Approve Estimate" then?