Recent content by Schulmann

Any update on this thread ? I want to upgrade a 2020 Tesla to a 2021

I am driving a SR+ on track, the only issue is the missing regen. For unknown reason the regen is disabled ... otherwise I enjoy the car as it is, I only removed the front dust cover behind the front rotors. Really good track car for a novice/intermediate driver. The chassis is very well...

I have been driving my SR+ on track and noticed that regen "vanishes" after the first higher speed braking. Battery, stator, invertor are around 45c. SOC doesn t matter same issue at 40% too. is it a "feature" or a protection on the SR+ ? Can the LR regenerate multiple times from high...

it takes time ! Today outside temps was 1c , preconditionning started 50min before arrival at 25c battery tempeature, arrival temp was 35c and during chaging battery heated upto 55c ! When battery is below 20c supercharging is limited to 30kw which is really slow

Here is a little update ( Temps is below -10c) On highway (70 km/h) heater M3 can t keep up with cold. However in city driving (stop and go) I dont have any issue ! I dont know if it is an insulation issue or a battery output problem. Preconditioning only delays the issue.

yes I do prefere the ELM327 over the LX. (I have both) and I do prefere the slower output.

My 2020 model cant heat enough when weather is cold: -14c wind 50km/h heating maxed. My M3 uses 280mwh/km !!!! Dry weather but cloudy. The heater works but I have the impression that I lose heat because of poor insulation. are there some critical places where a little foam insulation can help ?

I just received my OBDLink Mx before Christmas ! Before I was using an old ELM 327, it was slow to start and was updating every 3-4 seconds my screen. I have 3 minor issues with the OBDLink Mx (My cell is a Samsung S9+) - I believe it send too much data to the ScanMyTesla application. -...

Warming the battery pulls around 3.5KW in average. It heats up the stator between 50-70C. it is a Very effective method to warm the battery. There are two ways to trigger this process: Head to a supercharger in the navigator and stop at a redlight (TM3 will heat stator). It can't do it while...

Sooner or later it happens ... when I arrived to the local ski resort I forgot to check the charging pistol and connected it with ice and snow in the connextions. It didnt connect so I unplugged and I tried to clean it but it wasnt perfect , my charging rate was only 16A instead of 32A :( I only...

Battery cooling or heating ? or the 12v is weak ? What is the outside temperarure ? it can take a little time before my Tesla gets into deep sleep. For instance the outside temperature is 3c and Stator at 46c, my Tesla will cool the stator , result : 2% lost before going into deep sleep.

This is a good question that I am very interested in. The answer is easily available with a good logging software like Teslafi or Scan My Tesla. The efficiency of the charge depends on one sole factor: Battery temperature and 12v system’s state. (or something like that). I am still in search for...

Same problem here, scheduled departure is not working “perfectly”. Tesla charges at any time mainly when I plug it it. I dont know if it is because of winter. This is not an issue since the most important is to have the battery and habitacle warm for the departure time. And this is something...

I have installed Scan my Tesla on my M3SR+, one of the reasons was to monitor regen and better understand its behaviour for high speed breaking and mountainous areas on the road. Unfortunately there is only one param on regen and it doesn’t t seem to provide any useful information. BUT I have...

Your Tesla is likely not deep sleeping. Can be sentry mod, cold weather. 12v battery is charged from main battery and can use 400wh. 12v charging is P1. This my main source of basic consumption on my SR+. Have your 12v checked at a local garage it takes 1min.