taekua

Latest activity Postings About

• • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    This looks so cool, is this storage only? or also cooler ? sorry for the high jacking!

    Sunday at 3:34 PM
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    Sorry for the confusion, I'm not stating that having on the headlights will make a solid non pwm signal on the OEM ambient lights. I'm...

    Sunday at 10:58 AM
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    I did manage to have a working relay, the second one I shared This one, so this qualifies as a hardware solution only. Why I didn’t...

    Apr 20, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    Yesterday I noticed my ambient light turned on after I turned on the headlights manually, since it was not dark enough but I was driving...

    Apr 20, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    setting the ambient lights to breathing green while charging ----------solid when done but still plugged .... ay ay ay ..... I wish I...

    Apr 18, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    I briefly read, the CAN is a standard bus with standard baud rate, reading from it should not be complex, decoding it might, as the data...

    Apr 18, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    I am powering with 16V via barrel connector, no need to use the buck, as the model I have supports up to 24 V. I been given homework...

    • 

    Apr 18, 2024
  • T

    taekua reacted to vcor's post in the thread RGB Ambient Lighting project for Palladium Model S - lets do it with Love.

    Another way one could go is to monitor the CAN bus rather than tapping into the existing ambient lighting. I used a Teensy 3.6, which...

    Apr 18, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    Hi, due to my code relying mostly on ArduinoBLE library I BELIEVE any of these boards should work: Arduino MKR FOX 1200 Arduino MKR...

    Apr 18, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    updated the code with some enhancement as when I installed due to the PWM I saw readings of 0 and this can trigger the lights...

    Apr 17, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    One more post with all the information: PLEASE NOTE: this will ONLY work if you have a generic ELK-BLEDOM rgb controllers like the ones...

    • 
    • 
    • 
    • 
    • 
    • 
    • 
    • 

    Apr 16, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    here is my code: github This should be publicly accessible. I will work on a tutorial over the weekend. Arduino can be powered with a...

    Apr 16, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    TLDR: You hook it into a usb, then open a program like word, edit very few lines hopefully one or two, ideally none, click a button and...

    Apr 16, 2024
  • T

    taekua replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.

    I will absolutely share my code. Ill be sure to document it.

    Apr 16, 2024
  • T

    taekua reacted to Proppilot's post in the thread RGB Ambient Lighting project for Palladium Model S - lets do it with Like.

    I love the project. I used one of these boards a few years ago to add Z-wave compatibility to a Raspberry Pi I use for...

    Apr 16, 2024

  Show older items
• Loading…
• Loading…