Recent content by TeslX100D

NVX makes the only plug and play I’ve seen. Otherwise you’re gonna have to look at aftermarket.

Nvm I figured it out. TheSubwoofer speaker signal wasn’t strong enough. Installed an LC1i (since my amp has the bass knob). And instantly started working. 🤗

My JL XD600/1v2 amp turns on but blinks green for 4 seconds then solid for 18, repeat. JL manual says that this is the power up mode and audio is muted. Here's how I have it setup: I tapped the blue and black subwoofer speaker level wires right before they connect to the amp. These are...

You can look this up by creating a Tesla service account - its free and you have access to all of the wiring diagrams for your specific vehicle: Tesla Service

Could always use a switched fuse block + a relay (not picture but attaches on the right) that solves the power problem and simply turns it on/off. twisted cables at the bottom are coming from a DSP. Courtesy of www.caraudiofabrication.com youtube channel:

Thanks, now the question how to download it? I tried logging into the toolbox website with my service account, no dice.

Found the schematic for my year https://service.tesla.com/docs/ModelX/CircuitDiag/2017_ModelX_LHD_SOP6.pdf You can create a free service account and then hit the link in the top right: 2015 - 2020 Circuit & Connector Reference

So if im understanding this correctly, you tapped all of the wires after the factory amp to the DSP? I have found it impossible to find any detail on the specific wiring diagram for my 2018 Model X 100D with UHFS stereo already installed. Initially I found a video from NVX that showed on a...

Doing this now with a full Audison lineup VOCE series, wired back to Audsion bit ten DSP, JL 10" subwoofer, and an amp driving the speakers and one solely for the sub. My Model X is the UHFS upgraded stereo, trying to find the wiring diagrams has been a challenge however.

2018 - 100D Model X Passenger side falcon wing door is having major problems. Opening the door by every method possible, the door moves about 3 inches then beeps as if something is in the way. I have to then manually open it to do anything. When I press close (every method as well) the door...

What is toolbox3?