Search results

This is you against stock This is me against stock Do you see the difference now?

That’s 100% false. Telling by your wheel fitment and tire sizes you really need some guidance. Your tire aspect ratio is way off and so are your wheel offsets for aftermarket.

Nope. Everything is painted on the car.

The design is really fresh. I’m really happy with the results especially with a BBK poking through 👀

Dress shoes off and sneakers on! @UnpluggedP UP-05. 275/35 and 295/35 AS4

Dress shoes off and sneakers on! @UnpluggedP UP-05. 275/35 and 295/35 AS4

The best way to find out if a wheel is defective is to remove the tire and weights and spin the wheel on the balancing machine by itself. This is similar to what is called wheel runout. This is the only way to know if it is truely a wheel issue or tire issue I have been a proponent against...

Research

My IG has chock full of pictures. I don’t want to big down this thread.

Millimeter perfect 👌 @SignatureSales

Clean culture Dallas 2024 show

You can install mock without taking off the 3M to see fitment. Still the best looking oem + lip out there

I can confirm this.

If you want protection this is the tire size I’ll be running on the UP-05. 275/35 and 295/35. Just move the rear tires to the front and grab a set of 295s for the rear

I would display it on my bed but I think the wife would get mad lol

21x9.5 et35 and 10.5 et40. I have a 360 video view on my IG.

My new daily drivers just landed 😍 The design, cutouts, and shadows just sitting there really caught my eye and even better in person. @UnpluggedP UP-05 wheel

What’s the weight of 21s? I might just pull the trigger on this. The design is fresh and not repetitive like the normal 5 spoke or mesh design. I’m always into wheel estate

Normally I would disclose but they only said they would do this 1 time so yes I’ll be the only person with this lip on a Y. I doubt anyone here would buy a $3k lip not knowing if it fits or not and cut into it.

New UPP front splitter from a model 3 and yes it had to be modified extensively. Still a work in progress.

If you’re looking for off the shelf wheels you should checkout @UnpluggedP wheels. They just dropped yesterday and pretty 🔥

I have. If you’re in the area they’re fine but a bit pricey. Overall good work through. They have worked on teslas and know specific items regarding suspension directly related to tesla.

Nice build but could we possibly keep this page related specifically to the dsp itself? I’m sure there are people looking for specific technical info only related to this topic.

Make sure you have all windows down and pop the frunk. If you’re gonna be spending hours doing the install make sure both the penthouse and 12v is disconnected.

I’ll be honest and if you’re looking solely for quantifiable maximum gains then a smaller wheel and tire contact will be your best bet. I loved the spoiler so much I got it for the Y. I got it mainly for looks but if there are any gains then so be it. Just enjoy the car man but if you’re...

It’s gonna be hard to get it on video when sound quality is subjective. I DM’d you an option

Front is plenty. I believe about 12-14” extra. Rear is a little tight if you mount the dsp dead center like I did. You would need to rotate it like I did to give it a little more slack so the wires make an “L” instead of a Z to the rear amp location. The location I have shown is max. If you put...

This is 1000% incorrect. Do not put any power draining items in the front lug. How the tesla system works: HV battery goes to DC-DC converter at the lug. The lug then sends DC power to the 12/15.5v battery up front to get recharged. This is at 200amps. Then the 12/15.5v send that power to the...

Yes the 3rd picture. You have to make a board to secure it. Underneath the board I put Velcro with 3m tape to secure. Don’t drill into the car.

Mines a 22 AND you’re already poisoned by reading this thread. I’ll standby for your DM. Just send me the song you want me to demo.

I guess I can speak with experience since I have a lot hooked up to the penthouse lug (air, amp, and dsp) and I have no issues. 1. You don’t need an additional battery 2. You need a circuit breaker switch to disconnect the amp from the lug. The amp needs to have signal sense when tapping for...

I already have a control panel sorta thing for my air, voltage, and other bass knobs for the NVX. But if you’re looking for something more sleek and oem looking then maybe something like this...

Nice! The controller allows this: Master volume and mute: Main source slection Aux source selection Sub woofer level / gain Access to presets. Currently 6 slots. For me I needed all of the above. I run a different preset with passengers in the car and no passengers. The DP series speakers is...

Red seat belts and alcantara headliner

So YMMV but I just did an update. No breaker at all. Electronics consists of: RGB full interior lights, air, Nvx dual subs, and dsp and update went through. I guess I’m lucky.

You should really try and read others people’s experiences before posting

The picture of dsp at the rear is basically the same minus the birds nest of wires going towards the front on the rear seat. Will be doing some more cable management this week but to answer your question about upgrading to the 1k watt amp there is no need anymore on my end. The alpine sub was...

Full writeup. Speakers are on crack / cocaine now. https://teslamotorsclub.com/tmc/threads/hepaking-alpine-pxe-x121-12ev-dsp-review.320912/

So I saw Alpine debut this late last year at electrify expo but it has been crickets here in the US for release date. Luckily HepaKing has this readily available and in stock. I follow them on YT and saw they started showing it off a few weeks ago so I bit the bullet. This is a 100% plug and...

That’s a good idea since I’m doing a new install for it. I’ll add a circuit breaker and trip it before an install. Just in time too bc it just came in 😈

Thanks. Need to look into this bc I’m grabbing a dsp for my setup now. LOC is going to be removed and rca from subs will be running to the DSP.

I’m considering upgrading to the 1000watt nvx amp and I’m curious on what this switch operates or cuts off?

Just sharing what I’ve seen on IG. I would contact them or the owner for more info.

I dmd them and asked on IG. Yes you have to remove door panels and hatch panel to install.

Then why you asking lol

You can check yours but I do not have it in mine. They removed this blue grommet hole access. Someone else can confirm if they want to.

That’s only on 2021 and older. 2022+ they removed it

coming to a toy store near you

Brainstorming 🧠⛈️