Search results

The QR code. Yes it is behind the glass panel but I took a picture of the QR code with my phone so I only had to remove the panel by taking out the screws just the one time.

Yes, you can log into the PW3 with the Tesla One app.

That’s the alert that I was getting but is now gone but I didn’t mess with any of the wiring. I placed another router in my garage and now I can see all 3 PWs in my router app (previously had only seen 2 of the 3). Not sure if that had to do with the stronger WiFi (which was actually good...

@jesaf00, I was messing around in Tesla Pros app and on the networking tab that shows 3 options( WiFi, Ethernet, and Cellular), I touched on the cellular part and it didn’t seem like it did anything but after looking at other stuff I went back to the networking tab and cellular was checked...

Yeah the lights on mine didn’t go out with the switch off also. I don’t think they even went out with the breakers off either. Obviously there is a battery there so maybe that’s why. The light does flash red for a few seconds though and there is eventually a clicking sound so I can tell...

I also have an alert about the CAN wiring. As mentioned, I believe the support number is 24hrs. I suspect they with have you do the “reset“ method I mentioned earlier but after that they will probably work to set up a service call for them to come out. But hopefully if you leave the other 2...

Yes, that is the number I’ve been using. They aren’t super knowledgable yet on PW3 but they seem happy to be getting an opportunity to learn about it.

For home assistant I’m using the Tesla Custom Integration that I installed with HACS and you just use your normal tesla credentials to log in. For Tesla Pros app, I chose external user, logged in with my normal Tesla credentials. I think I chose new install and chose scan QR code. It wants...

So I just tried the Tesla Pros app and I can access the system with that app. It has a couple alerts about Battery expansion CAN termination issue that I guess I’ll ask about when they come out later this week. Networking section says one (the one I don’t see on my network) can’t connect to the...

Oh yeah that’s right 🤦‍♂️

The estimate from 32% - 22% seems right for 2 PWs. 10% of 2 (13.5 each) is around 2.7kwh, using 1-1.5 per hr is 2-3 hrs

The reset that they were having me do was to turn the switch on each of the PW units off, then turn off the breakers for each of the units, wait 5 minutes and turn breakers back on and then turn the switches on the units back on. It didn’t initially do anything, but I would later leave the...

So I also just got 3 x PW3’s installed recently and after install I was also having an issue with one of them. On the install the installers couldn’t get one of them online. They spent about 4 hrs talking with the engineers at the teir 3 tech support trying to get it online to no avail. As...

While that may be true, he mentioned he does not have PTO and his PWs were at 100%. If he doesn’t use the solar energy for something, the inverter just turns off. Better to charge the car some with what solar energy is available than to not use the excess available energy at all.

My 2017 Model S was also delivered in 11/17 with 2.5 and MCU 1. I had HW3 installed along with MCU 2 a while back and I have FSD beta. No change to the 2.5 cameras that were delivered with the car.

Same here. There are multiple 65 and 70 mph signs my car ignores. On the road out of my neighborhood the GPS/Map data is wrong so when I first turn onto the road the car thinks its 45mph when it’s actually 50mph. About a mile down it sees the 55mph and changes appropriately then about a 1/4...

Same here in South TX. Highway/Freeway Speed Limit sign detection of all speeds I’ve encountered work fine. However on County Roads or Farm Roads 2020.40.3 still ignores 65MPH or higher. Same road but 60MPH or lower it displays like normal. Yes I do realize the release notes say local roads...

I’m wondering if this is on purpose. Mine does not appear to see signs 65mph or higher. 60mph and lower it shows nearly all of them. Even when the GPS data is accurate with a 70mph zone the car still ignores the 70mph sign as I pass it. This has been on non-highway/interstate roads as I...

This happens to me whether I’m wearing my Apple Watch or not so certainly doesn’t fix it for me. Sometimes I can get it to not auto play if I fully close the music app and then turn the phone completely off and back on before getting into my MS. I say sometimes cause it doesn’t seem to always...