Search results

Is the kit capable to raise the car by 10mm higher?

@RedwoodMotors whats the different between the OEM springs and the Redwood springs? Any rate different?

Wow I have exactly the same issue as yours. They change the compressor low and high pressure sensors and recharge the gas still cant solve the issue. Now you lead us to the actual tiny cheap temperature sensor. Thank you!

Adjust the preload so you don't bottom out easily with softer springs. Thats what I did.

Possibly if you have the right tools. It will drop by 15-20mm

If you still on the original R&T springs then I suggest you swap them out to 8kg front and 9kg rear before you swapping out the whole kits again. I did that and the result is day and night.

How do you increase the front ride height? I spin the anti-clockwise and the grey tube increase and so do the preload. If I reduce the preload the grey will increase in length which will decrease the travel. What is the correct way to increase the front ride height? Whats the correct length of...

It's that the preload setting? I would prefer not to add more preload cause we don't want to make it harder for the rear

Weekend job. Now it's a lot softer and ride very smooth. Look at the rod size different and the higher the K the heavier the spring. Can we adjust the rear damper height? It's a bit too low now. In the manual it didn't say anything about height adjustment.

It's more than just 3 screws and a speaker. You need to tinkle with the MCU configuration. I already retrofit a few of 2019 and 2020 cars. All work flawlessly with Boombox and Megaphone activated on the GUI as well.

Sorry did you say 0mm preload? Wouldn't it bottom out all the time when hit slight higher bump? The manual recommend 25mm for M3 and 20mm for MY

Stock is 7k rear not sure about the front. 7k might be a bit too soft I think might be wobbly around like a boat.

Sorry guys, my "Rock Hard" might had been over exaggerated. Even though it stiff I still love the Ohlins kits without any regret. The handling improved 1000% compare to stock even at 20 clicks away from stiff. It's just give me a big grin on every drive. Where it can improve is some of the high...

Is it because you lower the chassis too far? Thats why its bottom out? Hows the ride now after a few weeks? My stock spring 11/12k still rock hard even on 20 clicks all round. Ordered 8/9k, still waiting for delivery

Are you planning to swap those springs for softer ride?

So anyone installed R&T on their Model Y yet? Whats the feedback? Firmer or softer? What setting are you on? I only installed on a 2020 Model 3 so far loving it but a bit too firm for me likey. I got a 2022 Model Y with firm stock suspensions and bouncy ride.

DO NOT BUY TPC PORT CAR INTO CCS countries. Job done. All these can be done. By the end of it might cost more than ccs vehicles. Just get a ccs native vehicle without all these hustle.

Interesting to see the OEM stock spring go as low as 6. Assuming the COIL 00.0-0000 is the spring rate.

Any different on Ohlins springs vs Swifts springs? Ohlins 8/9 springs seem to be slightly cheaper than Swift springs

I just installed the Ohlins R&T kits on our 2020 M3. I thought the rear spring is 200mm? Yes agree on the ride is a bit too firm but love the better control and way less rolling around. Now the vibration and noise over rough road/bumps are all gone. The new suspension make me want to drive...

My car giving out ecall need service error after installed the hansshow speakers activation kit. Uninstall the kit, the error message disappear immediately. Anyone having the same issue?

I bought the speaker and 3 screws from 1 of London Tesla part store. And installed it myself (relatively easy), but it will only have the UFO sound when you reboot the screen and it wouldn't stay on. One of my mate got the tools and help me switch it on at the car backstage software and the...

Wonder if these new matrix headlights can be retrofit onto older model 3? Done a bit of part number digging, they seem to be using 1 part number for all regions. Assuming it's adjust by software whether its LHD or RHD vehicle because its lack of the traditional cut off plate.

Just ordered 1 from the website a couple of days ago. It's still say the old mk2 with 7.3m cable. Ae we getting mk3 or mk2? Very confusing

Welcome back to Singapore Tesla! Glad to have you back.

It can be done but need the engineer to configure it manually.

I'm looking for this COC document as well as I'm the first hand new owner. Do you know who do I need to speak in Telsa Europe? The car is in the UK and registered with DVLA.

Hello, Wonder if anyone know and had experience of how to request the Model 3 EC CoC from Tesla UK? Obviously in the UK we only got the V5 once we purchased and register the car. I've emailed the delivery team and called them as well and they haven't got a clue what I'm on about. Is there a...

Hello all hope everyone had a great weekend. Wonder if the UK Model 3 map and navigation system works in Singapore?

Would you be able to do that if the car equipped with the latest e-sim hardware?

Hi Mark, yes thats exactly what I mean. The usb plug just to power the mifi/wifi device constantly so that hopefully I can communicate with the car via tesla app. Is there a solution for swapping the build in e-sim network provider? I read somewhere that as long as you sign "non-tesla sim...

Anyone know when will Tesla officially start operating in Singapore? Hope they found the right people soon.

Thanks Great tips! Thanks Tam!

Will it work if I plug an usb wifi modem in the car when I try to use the app to communicate with the car on the street?

Hello all I'm about to get a Model 3 in Singapore soon. The car is imported from the UK. Has anyone have the same regional car and manage to solve the app connectivity even if the embedded e-sim is outside of the EU? Obviously I'm not talking about music streaming or watching youtube on the...