Search results

I can try to find out at least to get a ballpark, I will check with the local shipping store. I'm located in NM next door to you may be cheeper to pick them up.

25 offset front 40 offset rear

Had these on my Plaid for less than 500 miles before I sold the car. 21x9.5 front with 275/35R21 PS4 , 21x11.5 rear with 325/30R21 PS4 Tesla blue tooth sensors installed I have over $10,000 in the wheels, tires, sensors, mounting and balancing. $7000 firm and buyer picks up or pays for...

The Track will be running next Sat. going to see if the DR's are faster then the stock 19"s last season at the track....

Well on the same stretch of crappy road the times (different days) with the 325 and 275 PS4 21" Signature wheels and the times with the 275 Nitto Drags are basically identical. First one with the 21" PS4's and 2nd with the 19" Drags. Traction control flashing on both pulls

Going to give the drag radials a shot on the plaid. Draggy is charging, will post results. But here are some pics, boy they are allot skinner then the 325's I have on my 21" signature wheels.

I think one of the updates has slowed dow the top end pull. And I'm not the only one that thinks that, allot of cars that use to trap 150+ in the 1/4 are now down in the mid 140's. My car only has 2K miles on it and has never been on a supercharger. My local track opens up the 11th and I will...

Very happy with my new wheels! Thanks Jamie 21x9.5" Ft with 275/35R21 PS4 21x11.5" RR with 325/30R21 PS4

Just got this pic from Jamie ! my wheels are ready and going to be shipping to me. God those rears look sick. 21X9.5" front, 21x11.5" rear... going to be running PS4's with 275's front and 325's rear. Can't wait to get them installed.

Do you have any Draggy runs with the 21" 275 front, and 325 rear?

Well there is no transmission, no drive shaft, no flywheel/flexplate, no clutch/TQ converter to gobble up power spinning.

I was just using that as a example, could be 380 front, 320 out of each rear for a 1020 total... And I would not say that 1100 is "physically impossible" when a Tesla engineer has already stated that the motors are "400 HP each". Tesla is just not pushing them to the max to make 1020hp if...

Well ya but the front only has one motor, the rear has 2. So if the front they had the motor turned up to the "full" 400 and each rear at 350 that's still 700 to the rear and 400 to the front, 1100 total... When My plaid looses traction at the track it always seems to be the front spinning...

That I would like to see is the Power numbers from that Dyno pull for the front and the rear. The Dyno should be able to show that because it's not a "linked" roller. I got a feeling the front motor is putting out close to the full 400 hp and the rears are limited.

Is the "hat" on the stock size replacement CC rotors the same thickness as the stock rotor? I just ordered wheels with offsets to get me the perfect flush look. Wondering if these are going to mess that all up if I get them. If not the same how many MM thicker or thinner are they? I have...

Anybody try running the draggy in any of the track settings? I'm surprised how fast the car still feels in drift mode, I figured with it set to 100% rear power it would feel slow with out the front motor working, the car still feels just as fast lol. I got a feeling the front is not totally off...

Thats the best looking stance I have seen so far! No problems with those tires being 28.7" tall?

What sizes are those??

Mine still not showing the download... I'm in NM

I was hoping the track mode was going to come with a power boost, car feel any faster?

Has anybody verified any faster acceleration times in the 1/4 mile from lighter wheels and/or different tires on a plaid?

what's the problem with it they can't fix?

do you this it there 305/35R19's or 275/40R19's?

nice times! what tire sizes did you go with?

So has brooks said if the 305/30's or the 305/35's are faster on the car?

there is a pic of my 19" T-sportlines on my plaid... they fit, just too skinny (19X8.5")

now THAT is bad ass! WOW! (I must be old) What size are the tires?

How about a 345/30R20? I know it would kill range, and probly make the car slower but man it would look cool! 345/30R20 rear with 255/40R20 SP4's would make for a cool fat/skinny look....

Are you mounting the stock 19" tires on those? if so can you post some pics once you do? Thats what I am thinking of doing would like to see what they look like on the car. Also have you weighed them?

Well that should put to rest the 19" Vs 21" debate .... I'm glad I got the 19's even if they are ulgy

If anybody is wondering on the stock 19" wheel and tire weight for comparison ... this is With the stock tires mounted. Tire Rack lists the Front tires as 25 lb and the rears as 28 lb. FT w/o Cover 51.8lb FT With Cover 53.4lb Rear W/o cover 56lb Rear with cover 57.6lb

If any body is wondering on the stock 19" wheel and tire weight there FT w/o Cover 51.8lb FT With Cover 53.4lb Rear W/o cover 56lb Rear with cover 57.6lb T-sport 19x8.5 with 275/40r19 nitro drag 55.4 lb

Well I guess I will be finding out next Friday if Drag radials help at all on the track. I just installed the 19x8.5 T-Sport wheels I had on my Ravin with 275/40R19 Nitto Drags and they fit fine it seems.

haha I was thinking the same thing!

ya 157 would be bad ass! I think the only way that's going to happen is if there is a update that ramped on the full power faster then 70mph...

I ran quite a few 151-152's in my 19" car at the track (152.59 being the best). Even just using plaid mode and no launch control it still trapped 151's. This is with the covers on, not sure that matters I did not try taking them off.

Any problems with those Nittos only being 27.7" tall vs the Stock plaid tires being 28.0-28.1" tall?

I think I may try to run the T-sport Wheels I had on my Ravin with the Nitto 275/40R19 Drags on my Plaid, I'm just worried that them being 27.7" tall and not 28" tall like the stock Plaid tires are may cause a problem. What this car needs is a "prepped drag strip" mode that brings on the full...

I think my Plaid feels as fast in "sport" as my 2020 Ravin did Ludicrous...

Why Tesla put protection film on the fender above the rocker and not on it I have no idea. Car has less then 400 miles.

Well its 3AM and I just got back in town from racing at the track in my Plaid with 19" wheels (covers on). I made 17 passes, I go into more detail tomorrow after I get some sleep but just some highlights. My best pass was my first pass at 92% SOC at ran 1.49 60ft, 1/8 mile [email protected], 1/4 mile...

bad ass! What tires and sizes?

I can tell you with my 2020 Ravin my car was never as quick as I saw 21" wheel cars on the net run. I made over 300 1/4 mile passes in my Ravin and I think it's best pass was a 10.60@126 with a 1.50 60ft with Cheetah Stance and that was with Nitto 275 Drag radials on some T-sport 19's, on the...

Has anybody run a Plaid a full 1/4 mile on the 19's on a draggy or the track? I'm picking up my Plaid Monday with 19's I'm hoping it's at least as fast as the cars with the 21's. Also hoping Tesla did not do something stupid like limit the top speed even more with the 19's giving it had hubcaps...

How do I go about getting a Price on a set of Monoblock SV104's, Brushed Titanium, 20x9.5 FT , 20X10.5 RR, Flush no poke fitment? (Plaid)

Yes its Roswell Its a model S performance

Anybody els get this today? "In Launch Mode refined motor controls have increased your cars high speed power, improving acceleration" Anybody have details what was done? Im charging my car now so I can get it up to 100% to try it out...

Both those runs where 6.80 1/8 mile. Thats the only times the track was giving that day.

Traction was causing me to run a little slower 1/8 mile then I normally do on a premed track.