Search results

It may be a software issue. I had the same thing happen. But after an update it started to work normally again.

Do you have a screen protector on?

Did you have any of these electricians do a load calculation? Seems like your panel is maxed out or even over loaded as is. Can't see your main breaker but based on the aluminum main wires. It looks like it's 100a service?

It's normal. I have them on all my door seals

Just installed mine. Took about an hour. The seat belt bolt was not even on tight nor was there any loctite from factory.

If you are close enough to the car in your blind spot while you're trying to change lanes. The model y adds resistance to the wheel to try and prevent you from changing. I've also had it once where I was merging into the highway and another car drifted into my lane next to me and the model y...

The parts catalogue only shows 2 versions of the c pillar panel. The non parcel version and parcel version. So I would imagine 2021 is the same as 2022.

Maybe there is something cracked or broken internally. Would recommend you to schedule a service appointment since it's under warranty

Max trailer weight is 3500lbs Max tongue weight is 350lbs So you can technically put 2600lbs into the trailer. But you should also take into account how many passengers you are carrying and how much weight is inside your car. The hitch height will depend on the uhaul trailer. You will want to...

Airduct supposedly on backorder

In Canada I initially got an estimate bill for $147. I just looked at it again there was a comment saying quote outdated followed by a price of $129

Did you have to move the driver and passenger seats forward?

I contacted SC again through the mobile app asking them to double check the supposedly new part # (which apparently is incorrect according to some users on this forum). They responded back to me saying the original part number I asked for is the one they ordered. Even though the invoice shows...

Possibly. Since the original was just a big opening. No different then the current HEPA one if you don't install the actual filter ontop it's just another large opening duct as well

Looks like I should contact them again thanks

So I also sent SC that part number 1499137-99-C and they said the updated part number is 1509536-00-B I noticed on the parts Catalogue there were 2 part number for air intake duct under the 'cabin hvac' page. But under the 'passenger duct and vents' it shows part number 1499137-00-C I believe...

That's really strange because those parts are listed as over the counter in the parts Catalogue.

If you own a smart phone with data plan then worrying about privacy in your car should be the least of your worries

I believe it only unlocks once you push the handle in.

I'm assuming you're talking about this? Maybe change it to heading up before Starting navigation

Press the compass looking button on the top right of the map screen.

This happens to most cars when you use the wiper fluid when moving. Faster you drive the more it will spread along the side window.

I ordered mine yesterday and SC also replaced the duct to this part number FRESH INTAKE DUCT(1509536-00-B)

Tesla is known to refuse touching your car if there's any modification done around the area that needs servicing.

Maybe wheels detect some minor slipping and turns off Regen

I believe that it's the rear defrost lines on your hatch glass that's on

#6 copper in Canada is rated for 60A

Teck cable is the armoured wire with the black rubber coating outside. It's used for running underground and outside. You only mentioned you're running it from basement to garage. You need to be more specific on how you're planning on running the wires. Outdoor, under ground, surface, through...

Same just got the email promo code invalid

Most new outlets are rated for both copper and aluminum wires. It doesn't hurt to use the paste

#6 aluminum is rated for 40 amps. With your box being so close to the panel you should be fine using the mobile charger without changing the wiring. Trying to pull a wire through will be hard and you may even damage the wire without knowing since it's behind the wall.

April 2021 build. My left side (original camera) has the orange blinker glare. But my right side does not. (Right side camera was replaced in July 2021 due to repairs on fender).

Also in an emergency situation (please don't do this unless you know the sequence of steps to do it properly) you can connect a generator to the 14-50 outlet to power some devices in your home.

Like everyone said. 14-50 is just more common and more useful if you plan to use that plug for different applications. A 14-50 has a neutral wire meaning it has the capability to be used as 120v. I'm a contractor and I have a subpanel breaker box that plugs into a 14-50 to give me 4 extra...

Appreciate the update. I ordered one too. Don't find this thread redundant like someone said. What I find redundant is the endless new threads about holiday update. 🤣

Here you go. Before everyone starts telling you to read the owners manual. 🤣

I've been reading this thread and other similar ones on and off. I do agree some things were much easier to access in the previous UI, but there is one thing that keeps popping up that a lot of owners seem to want easy access to which is the tpms screen. I cannot figure out why this particular...

For those asking how to save dashcam footage without honking your horn, you simply touch the car icon that brings up the control screen. Then touch dashcam. If you touch it once it saves the footage and I believe if you hold it. It turns off/on dashcam

It's like how every second update, there's a winter improvement. Nobody knows what they really improved.

I recently helped install another v5 auto frunk. Again after the initial install, the frunk wouldn't latch properly on its own. We kept readjusting it. Finally I ran out of time and was going to try it again another day. We managed to get it to a point where it would close fully but required...

Does it pull it down but after it 'latches' it bounces back up? That's what happened to me. When the tub wasn't installed the hood would close normally. But as soon as I reinstalled the tub the hood wouldn't close. The gasket around the tub created enough resistance that it activated the anti...

is your cable from the hansshow motor (the one that pulls the latch closed) is not in a tight loop. if it's in a tight loop it makes the cable shorter which pulls onto the latch and not giving it the proper clearance

I also have this problem. However I noticed it while I was installing my auto frunk. I opened a service request with tesla and they responded with an estimate invoice stating the wiper arm needs to be replaced. Any suggestions whether I should remove the auto frunk so they don't blame it on that?

Make sure the cable of the motor that pulls the latch down is not in a tight loop. I think most will try to put the motor by the driver side headlight and it doesn't work. Have the cable sweep gently and stick the motor along the large aluminum bar thats under the front bumper. I had the same...

Yeah everything is connected. The frunk is working fine. There's no warnings or anything. When I look at the notifications in the service menu it says there are no active alerts. But if I scroll down to the day I installed the auto frunk then I see the hood latch sensor service required...

I recently installed an Auto Frunk v5 by hansshow. Everything is working fine and there's no warnings inside the car. However when I was playing around with my app I noticed there was a alert in my service menu that my hood latch sensor requires service. Does anyone know if this is because I...

If anyones interested in the auto frunk from hansshow. Hansshow has black Friday sale right now 30% OFF. https://www.hautopart.com/

I can't speak for others. But main reason I want one is because the frunk lid is made of a very thin aluminum and it seems to flex a lot when you try to close it. I'm afraid of denting the lid. I personally don't use it because of this reason. So if I had an auto frunk I would probably use it...

It just fits. I picked up some 19s yesterday. 2 on stacked on the folded rear seats and 2 in the trunk. Just a bit awkward to load and unload the 2 on the folded seats.

Ive never gotten mine to work since I picked up my MY in April 2021. After probably 4 or 5 updates now. It's been the same