Search results

The answers to all your questions is yes. There is a screen where you can set what wheels are on the car. The MYP comes with 9.5 wheel front with 255/35 and 10.5 rear 275/35.

https://teslamotorsclub.com/tmc/threads/show-off-your-aftermarket-model-y-wheels.189023/page-27#post-6711246 Lots of stuff on this thread...Most prefer to slightly push the wheels farther out. Start with what wheels you want first...and if you are keeping the same rim width. Keeping the same...

Finally got pictures of the motor plate ID. 3D3 Front 3D1 Rear Specs: 3D3 137kW 219nm 3D1 202kW 404nm That look right?

3D1

Clean Friday.

Wheeltec here in Tampa 9.5x20 +32 10x20 +34

@Wreckz

Credit to Wreckz for putting me on to these.

AG M610

20x9.5 255/40 +32 20x10 275/40 +34

I have the 1up standard with 2 racks and 2 add-ons...the base 2 rack weights 46lbs and each addon weights 18. So we are at 82lbs when all 4 racks are on plus each MTB bike is 30lbs. We are at 202 lbs. So now confusion. Tongue Weight vs Vertical Weight Limit. From a tongue weight perspective...

$.0685/KWh Tampa, FL

Came from M3’s so harsh ride not surprising. I did like the select-ability of different modes like “Track” however in my last sport SUV “Trackhawk” and others i test drove its hard to get away from taking big tall heavy truck and trying to make it behave like a sports car is going to requires...

Great info, thanks. I am close on the spec now: 20X9.5 255/40/R20 +32 20X10.5 275/40/R20 +40 Basically stock staggered but in 20's with higher profile tire and pushed out flush on all fours 8mm. The 255's roll 742 revs/mile which matches stock and the 275's roll 726 revs/mile vs 729 stock.

Can you tell me the size on your wheels/tires?

That looks great. Looking at the 20 x 10 40 offset with 255's.

What wheels are these?

Did you get your wheels OP? I am in the same boat - just took delivery of 22 MYP. Love the TY115 but man $$$$. https://tsportline.com/collections/tesla-model-y-20-inch-aftermarket-tesla-wheel-and-tire-package/products/ty115-tesla-model-y-20-inch-wheel-and-tire-package-set-of-4 The...

More pics with rack.

By the way. I use a 1UP rack the has an integrated tightening mechanism that doesn’t require a pin the secure. https://www.1up-usa.com

I had similar thoughts. The stock cover is difficult to routinely take on/off. I am constantly putting rack on and taking it off. I cut out a 77mm X 77mm square in the cover and trimmed using door edge molding. Total cost $4.