Search results

Very nice write up and you were also (basically) in my neck of the woods! We did get the FSD beta in Canada as well and it works quite well in around town. Teslas are by far the most popular EV in Vancouver, there's some mustang Mach Es, rivians, bmw I's and polestars. But yeah very cheap...

Vivid racing gloss CF diffuser installed! Really like how it turned out 😁

Thank you!! Yeah its definitely an interesting one 😁

Thank you!! Its Avery's Mysterious Indigo, it's a pretty interesting color and shifts heavily based on the lighting. During the day its quite purple, overcast/early evenings more blue and at night its's midnight purple/black. Here's a bit of a photo dump since I haven't uploaded any photos in a...

Thanks a lot!! Got a couple things going on in the next couple weeks, stay tuned!😁

True, but it's really not a flashy shade, more stealthy than anything. Almost looks black in the evening/night. Everything else on it is pretty low key imo 🙂

Thank you!! Just a few light touches 😊

Little fall shoot!

Little run earlier this summer at the local drag, ran against a Challenger SRT8, came in at 11.83 @ 116.49 mph

19x9+35 with 15mm & 20mm spacers (wasn't planning on lowering originally otherwise would've gone 19x9.5+35 instead )

These ones are from EVOffer

Thank you!! Ahaha no it's not, it's Avery's mysterious indigo, in daylight it has a purple to blue colorshift, during the evening its basically midnight purple. Truly hard to really capture the color on camera 🥲

Another update to J4RVIS! -Maxton V2 Rear Diffuser -M style side mirror cap replacements -EU Spec OE style fog lights (no amber side markers) -Fog light trims -New purple to blue color shifting wrap

Another little practice video, got some exciting things upcoming for J4rvis in the next few weeks!

Thanks for the response! Yeah makes sense, curious what setting you went with on the rear? I’m guessing the electronic torque bias settings is a track mode setting, have an LR so I don’t have that sadly!

Gotcha! I have the front set to softest setting and the rear to the middle, but want a bit more aggressive, will adjust the rear again and see how it feels. Thanks!

Have MPP comfort coils and looking to know what settings people use for their UPP sway bars for spirited street driving primarily.

Appreciate it!! Definitely helps with with loosening dirt initially, also makes the wash process a little more fun 😅

J4RVIS has a new brother! 2023 Model Y LR

Little walkaround video!

MPP comfort coils Ikon motorsport front lip JC Sportline spoiler

Thank you! 19x9 +35 with 15mm and 20m Didn't plan on lowering initially or would've gone with 19x9.5 instead

Yeap, 15F & 20R

Thank you! Love how it looks against the black/grey

Few updated pics 🥹:

Couple more goodies with the summer wheels back on! -Aluminum skid plates - front & rear -Forged bonoss purple lug nuts

Appreciate it! And ahah yeah just made more sense especially when I had all winter to think about it after going back to stock suspension

Got a few things in today, excuse the super dirty photos as it is winter :') Was going to put back my summer wheels today, but alas, it's forecasted to snow a few times in the coming week, so on hold another week or two! -MPP Comfort Coilovers (1" gap all around) -UPP Front & Rear Sway Bars...

PM'd

Thank you! It's the Ikon Motorsport lip

Ah! I live about 20-30 mins from Van, don't venture there too often unless I need to. Totally up for a meet up if you're in town again, your 3 is looking awesome too 👌

Appreciate it! MSM gang ahah 👌

Thank you! Not from a specific vendor per say, had a friend who has a contact in HK make it to this spec. The design is slightly different from hansshow's one but I'm sure they all use a same/similar factory

New steering put in! - Dry carbon on top, bottom and steering wheel trim area (to match dry carbon dash trim) - Thickened rim - Genuine Italian alcantara on the sides - Alcantara airbag cover - Retains heated steering wheel

Very nice! Depending on how dirty, I'd still recommend a hand wash after the initial foam/soap wash (unless your whole car is PPF'd) cause it can still cause micro scratches/swirls in the ceramic coat just for reference. Definitely agree, foam guns/cannons definitely spice up the car wash!

Appreciate it very much!! 👍

Thanks! I'm using the Chemical Guys TORQ max foam cannon in the video which connects to a pressure washer, but I also have the CG foam blaster which connects to a garden hose which isn't too bad (you won't get the super thick suds with this though)

Just did a wash video of my process, the products I used are in the description, also PPF'd & ceramic coated:

Thought I'd share a little wash vid of Jarvis!😁

Ahah yeap, almost tempted to keep them but I'll post some afters once I get the AWD ones switched. Plus they'll be better for dailying, been stressing about what I can clear at this height o_O

Long story short; SR version of Eibach pro-kit springs were accidentally sent to the shop that installed them, so it's a little lower than it's suppose to be. Looks pretty good though ahah, waiting for the proper AWD set to be delivered before they swap them!

Thank you! And yes they are, there is quite a few wires though

Yeap, mine are the same which is why I wasn't a fan and was looking at alternatives

They're quite bright during the day, I'll try to post a pic soon

They're completely plug and play, can definitely remove them if needed for any warranty work for whatever reason!

Just installed these with the red signals (1 reverse light + 1 rear fog light) in NA. We'll see how they hold up!

Installed some eagle eye tail lights with red sequential turn signals!