Search results

So I went to the tire shop and they confirmed was the front wheel bearing. I mentioned that in the Tesla app in the chat with the service appointment, and they seemed to accept that was likely the cause. I kept my appointment and decided to still try and drive to the service centre even though...

After talking with the service centre, they suggested it could also be a wheel bearing. This tends to make more sense, so hopefully it's the case. They suggested using Roadside assistance if I wasn't comfortable driving the 250km to the service center. I put in a roadside request and they got...

So we just drove home from the airport after a week. On our initial drive to the airport a week ago, our 2022 MYP started making more noise than usual somewhere in the drive train. It sounds to me like its front motor maybe but not super easy to tell. We made it fine, no warnings or anything...

50kW 🤦‍♂️ That’s probably good and fine for shoppers I guess but given it’s beside a supercharger I get the feeling it’s intended to be a fast charging stop. I really wish they’d start doing better with CCS fast charging in the county.

Anyone tried using that one uncovered pedestal? 😂 Looks like it should be open annnny day now though? Doesn’t seem to be much left to do.

Just confused as someone said earlier the aura charging ones were at another location.

Do we know then what the blue chargers are in the picture posted to twitter? It’s not super obvious at first glance but if you look closely im pretty sure those are chargers too.

Not using the handle functionality here but I noticed a couple weird things on an older commander firmware with 2022.44 - Auto high beam off related - it seemed to keep setting this over and over when TACC was engaged - I haven't turned this on again since updating everything since 2022.44 is...

Nice to see a good set of CCS chargers there too. Sorely needed in the area. Let’s hope they are reliable. Of the few “fast” (50kW 🙄) CCS chargers in the county, seems they aren’t very reliable. Yes we get Tesla reliability but in the spirit of EV adoption in general would like to see better...

Interesting! Looks like some CCS chargers in the opposite corner too.

4324 Walker is in the same block of buildings as Cora’s and Vento furniture. Was just in Vento the other weekend but didn’t notice any construction (though I wasn’t exactly looking for it either). There is a petro station there too. I don’t go into Windsor that often these days but next time I...

I think the sub available in Canada is one of those things he said “yes very soon” to and of course here we are months later still. Agreed EAP would be what I generally want but for the price it’s just hard to imagine the value being worth it. Oh well. I have the buttons now so at least...

Yeah I'm guessing 8km/h over the posted limit would have caused much more confusion than rounding up to 10! So I suppose we are a bit faster still... Just not fast enough.

Ahh yeah I had seen something about that... that would make sense... Good, that sounds more likely to be true where it ends up. Happy to see one go there!

Just a bit of a grumble and curiosity… Does anyone else find it extremely annoying that AP is limited to a max speed of 10km/h over the speed limit on roads that aren’t divided / separated? Around here you can pretty much guarantee inducing road rage driving only 10 over the limit, to the...

Wish we could subscribe to EAP and / or FSD in Canada. For me, neither provides the value to justify the price based on our driving patterns, however I’d pay for a month 1-2x a year potentially. Have a big road trip coming up this winter driving 95% on major highways and I’d pay for a month...

That location on walker would be pretty good. Not far off the 401 for those traveling on it, and pretty convenient for locals in the surrounding area. Lots of shopping and food options there too. Also not too far from the airport. I thought at one point the location was planned somewhere...

I'm about to give this a try... I printed one out of PLA just to see how it came out and roughly fit (as I find PETG a bit more finicky and often ends with me cleaning the nozzle after). I'll probably print both in PLA as it's cold out now, just to test them out before I finalize them in PETG...

Didn’t matter ultimately. I thought maybe my 3.6% from March was still good but SA said it needed to be refreshed so I’m 5.2% now :( On the bright side I asked to re-enable trade in and that value went up since the first time. I’m going to trade in (the offer is a no brainer as it’s better...

Got my VIN yesterday (hidden in source, Ordered March 18), tentatively scheduled for pickup 6/27. White on Black MYP - F468 VIN series, apparently just built last night and will be en route shortly.

Finally got my VIN! Hidden still, F468, new EDD is June 25-29, so squeaking in for the quarter (OD of 3/18). Have texted the SA to see if they can make the MVPA happen so I can make final payment before the current rate I have expires on the 16.

Congrats!! I’m still stuck waiting with no VIN here :( Any other white _performance_ MY’s on the lot? I can’t imagine mine would be sitting there with no VIN assigned to me yet, but one can dream.

West coast?

Had a 9 day window of 6/6-6/15 and this morning pushed back to a 14 day window of 6/13-6/27

EDD Pushed here this morning as well, from a 9 day to 2 week window ... Was 6/6-6/15 to now 6/13-6/27. Next quarter feels inevitable now.

Just got pushed back this morning from 6/6-6/15 to now 6/13-6/27 :( looks like i'm going to end up pushing out next quarter at this point. Boo.

I'm not sure if a 9 day window is considered 2 weeks or better, but hoping that this quarter is not quite the usual business of pushing things off.. I know of course anything can happen, but I'm feeling optimistic that this is better than a typical 2 week window and it's earlier than my last 2...

My EDD went to 6/11-6/25 yesterday and now this morning to 6/6-6/15. No hidden vin yet, but hoping I see one this week!

My EDD updated yesterday to 6/11-6/25, and now again this morning to 6/6-6/15 ... No VIN hidden or otherwise, but hopeful this means my VIN is imminent!

Sounds like there’s some different experiences with financing. I have approval with RBC for 3.6% from March 19th. My EDD is now June 11 - June 25 and I think my rates should have expired already? So should I see something in the agreement that shows as such? Or maybe it sounds like they...

Congrats! Hoping I’m not tooooo far behind you now given our close configurations and locations and your OD being a week and a bit ahead of me! Enjoy!

You had a narrower window at least. Mine was May 16 - June 20 and now June 6 - July 4 (4 weeks now instead of 5 at least I guess). Seems like no MYP’s really on the lots in GTA here. But lots of MYLR and M3’s with missing charge port parts. I guess at this point I hope they build a bunch of...

Similar situation here (same config, very close to same OD and now exact same EDD) It seems like MYP production has slowed or stopped. Maybe to just get the longer waited orders for MYLR out the door, or maybe supply (perhaps the matrix headlights we saw missing from some M3P’s recently are...

Someone was kind enough to do some investigation at the Kitchener SC. Lots of MYLR’s waiting, no MYP’s it seems. Definitely some with no charge port ECU yet too. Also apparently vins in the April 16 or so build time frame.

My SA apparently is not as helpful. Just get the canned reply of “looks like you should be assigned a VIN before too long” I got pushed out to June 6 - July 4 now though :(

Almost same here. OD of 3/18 just went to June 6 - July 4

Ride is always subjective of course, but this is particularly interesting to me, and what I've been wondering... Are a lot of the MYP ride complaints from older builds, even older '22 builds perhaps? This is all speculation for the fun part as far as I'm concerned, but I'm hopeful my yet to be...

Interesting! Obviously hoping we both go end of May!

My EDD seems immovable. OD: 3/18 EDD: May EDD: June - July (forget the days, this updated within a day or so of order) EDD: May 16 - June 20 My current EDD has not changed at all since about a month ago now. MYP white/black int, no FSD, no tow, Kitchener, ON pickup. Really hoping we see...

Same EDD here (5/16 - 6/20), MYP White on Black, Kitchener delivery. Would add up that they may have a bigger shipment coming our way end of May. Saw someone mention there were at least a couple of truck loads delivered last week to a Toronto store, not sure what models...

Just bumping this thread as I’ve been nervously reading up on Model Y Performance suspension and ride as I wait for my delivery. This video though it’s for a 3 suggests that the performance ride is much smoother than past models This gives some more credence to the OP’s experience and...

So I guess these things are using chademo adapters which means 50kW max :( I emailed them to see if they can clarify: 1. That they are indeed using chademo 2. Why the Tesla ports are listed at 200kW in some locations if they are indeed restricted to 50kW 3. Why they are charging the same rate...

Really curious to see how reliable this is too. I installed and setup the Ivy app and it looks reasonable. They show available, in-use and offline charger info in the app for each station including if it’s CCS Chademo or Tesla connectors. Waiting for our MYP but for the main stretch of 401 we...

White / Black Interior MYP, No Hitch, No FSD Pickup: Kitchener, ON OD: March 19 EDD: - May - June 15 - July 20 - May 16 - June 20 Not a bad wait but still very eager and hoping I'm on the front end of my current EDD :)

I haven’t used them before but they seem legit.

Got my valuation back from Tesla and it was a good $6k CAD lower than what Clutch offered and about $10k lower than what I might be able to get privately. Not a good deal unfortunately. Clutch is a good option if I need to move fast and not worry about the financing left. I was prepared to...