Search results

I am guessing time and wear, most likely a thread not entirely secured. I installed it 5 months ago with no problem other than the initial one. However during the Christmas cold front my 12v disconnected but was revived simply by attaching charging cables. I am curious as to what could cause...

solution: Dropped it off Tuesday morning with the tow even though apt was Thursday Am. They called me Wednesday around lunch explaining that the 12v had been set up wrong. There were a couple wires on the fuse box that were not fully tightened causing slack. This is interesting as I recently...

Update: car towed today using flatbed. Hooked up jump points under cone. Then was able to activate tow mode. Car is waiting at shop for apt. They provided a model Y as a loaner.

update: my exterior lights turned on without me in it a couple hours ago. Went into the console and turned lights from auto to off. Hopefully that will save the battery till I can get serviced.

2015, RWD model ~100k miles

Thank you DerbyDave, will be doing that this week. Will post the results. Just fishing around to see if this is common

Nope, still there.

Arm holding the pedal is fine. Almost impossible to tell if I lost hydraulic fluid as it snowed heavily here and melted. I wedged my foot under the pedal and gave it a nice little tug back towards me. No movement and I stopped because I didn’t want to put too much force. So car turns on but is...

I drove my car 3 miles, parked it for 8 hours, yet when I get in my car it’s beeping like crazy. Break pedal is stuck down so I cannot shift or release it by pressing on it like usual. It was 29* out and it previously rained the days before, but not the day off. The picture below is of all the...

So I have now had two problems with my gen three door handles. Both times it has been stuck out. One time the motor was corroded, odd, any thoughts? (Corrosion was on top of motor that you can see) Second time was a little more complicated. As seen in picture silver is part of the door handle...

So I have now had two problems with my gen three door handles. Both times it has been stuck out. One time the motor was corroded, odd, any thoughts? (Corrosion was on top of motor that you can see) Second time was a little more complicated. As seen in picture silver is part of the door handle...