Search results

I had a chance going through the same spot with suspension page open but there's no option to forget the location. The one thing I couldn't do is slow down as it's on freeway. I wonder if it's because of the speed or just the software on MX 2020 LRP (considered as legacy model, so not much new...

Hi, I drove by a under construction part of a freeway, the car offered to raise suspension for comfortable drive and I recalled I did something to confirm (yes or like that). Since then, whenever I reach that section of the freeway, it automatically raises the suspension. Now, construction is...

Hi, Anyone has any tips/tricks to replace taillight clear cover on the passenger side? I couldn't find much information/video about this on internet and youtube. Thanks,

Thanks all, since I read some bad news about what happened after such noise, I brought into service anyway for checking brake and breaking applying. Glad to inform everything's normal.

Hi, I noticed shrieking sound when switching between park and drive. It doesn't sound normal but want to double check if anyone experienced the same thing? Attachment is the zip video. Thanks

Thanks, Why did they need to buy the part but they couldn't push it back it?

Hi, I'm not sure why the rim above the wheel came off. Nothing seems broken and I noticed there are some clips to push back in. At the moment there's some resistance so I wonder if anyone had similar issue and best practice to push it snap back in? Thanks.

Thanks, I rest my case with workaround by using cell phone WIFI sharing. I don't think there's any absolute solution to this. Thanks for all inputs.

Mine is MX 2020 LRP with premium connectivity subscription. I usually park it in parking lot underground at work without signal so it's disconnected obviously. However, when I drive it out to the ground floor, it takes a long time for it to reconnect (which causes missing data for me on...

That is correct, PSI only shows up after driving out of the driveway. I removed that details as I think it shouldn't impact temperature much yet.

Thanks folks. All good info, here is the tricky part I encountered last night when trying get this PSI balanced. Sticker on the door suggests 42 PSI when cold but per guidelines I researched (and even at pump station recommendation) if tires are hot, +4 PSI. So, I decided to top the tires to 45...

So today is first snow day in my area and dashboard prompts my front left tire was 37 while all other 3 are 38. I did a quick stop at gas station to pump the front left tire to be consistent with others. It was a painful experience to match PSI so it stopped at 39 for front left tire (rest are...

I imagined it would be awesome. I have my NAS available, now I can't purchase Pi anywhere :). All out of stock :). But this is a good starting point for me to explore more. Thanks again.

Thanks for the pointer. Looks very interesting. Definitely will look into this.

I was so excited to see this but then my MX 2020 LRP is not supported. Any chance to request this to be support?

Hi, [Model X 2020 LRP] I attached SSD to USB data port. SSD has 2 partition, one is dedicated for Sentry Mode, the other is for music. Everything works great. Now if I need to add more music to the SSD, I need to remove it from the car, plug it into computer to copy more music then plug back...

There's another side effect is the car entering freeway thinks I'm blocking them to pass :). However, I'm doing workaround for this by turning off autosteer (keeps smart cruise) at those merges :) and re-engage afterwards.

Thanks much, now I understood a bit about these wirings. I'll give it a try. Thanks again.

This one is interesting. That would be my next step to check. Now, I got this license plate mount with light It has 2 wires to the light but I couldn't find any instructions how I could connect this to the 7-pin outlet near the tow hitch. I know I should get some adapter but I'm not sure what...

I haven't been stopped either but wanted to be as much compliant as possible. Also, recently we're crossing borders quite a bit. Camera at custom border can't read the license and it causes delays. Looking for a simple solution if any since I put on and take off bike rack quite often. Thanks

Hi, Folks, those carry bikes, what's your solution for license plate and taillights covered? If possible, add-on solution (quickly remove if not used) is the best as I have a very light weight bike rack I wouldn't like to change. I've been scanning few threads but couldn't figure out the full...