Search results

Wondering what range is everyone getting with MY LR lifted and AT tires? I'm getting 380Wh/mi for 13k miles so far. Barely getting 200 miles total

Yeah agreed! Do you know anything about Texas models not fitting lift kit?

J Unable to get it aligned properly! have been to two different shops

I just saw Tsportline website for lift kit and NOW they say lift kit is only for Fermont build and NOT for Texas?????? https://tsportline.com/products/tesla-model-y-1-8-lift-kit-set

Can anyone share their Alignment spec on Model Y with MPP lift kit and 255/55/R18 tires on them? I've been to few shops but couldn't get it right. It is pulling slightly to the right. Thanks in advance!!!

Any recommendation for good alignment shops for Tesla Model Y in New Jersey?

5mm spacers?

Also, thanks for the reply @MountainPass I see lot of guys had no issues with alignment after the lift. Not sure whats wrong with mine

I’m not saying it’s because of the lift kit but alignment do change after installing lift kit. Shop tries few times and everything is green. Shop suggested “ You may want to consider adjustable rear toe arms as the left one is right at its limit. “ I can get a toe arm from you guys but didn’t...

Anyone had any issue with alignment after 23 MY LR MPP lift kit install? Mine pulls to the right slightly. Shop said they got the toe spec as close to perfect as they can and suggested I may need to consider adjustable rear toe arms. MPP customer service has not been much of help with this :( I...

Dont be a jerk

Clear all the calues in this pucor just iffset?

Thats what I see

I installed MPP lift kit with Camber arm and my alignment does not look right. Shop mentioned they tried rotating tires and all alignment signals are green but when i drive it on the road it tries to go to the right if i leave my hand off steering. They couldn't figure out why...anyone has seen...

I installed MPP lift kit with Camber arm and my alignment does not look right. Shop mentioned they tried rotating tires and all alignment signals are green but when i drive it on the road it tries to go to the right if i leave my hand off steering. They couldnt figure out why...anyone has seen...

yes, i did

Thanks for all the help guys! All set now! (......except MPP lift kit with camber arms which im installing next week.)

Wow...I'm only getting 200...i must doing something wrong! its 2023 MY Long Range

270wh/mi coverts to what number in plain miles? :) sorry I'm trying to understand new lingo

Yes, those after market one fit perfectly. I'm getting my lift kit this week too but now wondering about the range hit :) ...getting around 200 miles with 18" AT tires

So I did my first ride after installing 18" wheels and Toyo 255/55/18. I couldn't compare with stock as I only drove stock tires for 15 miles to get to the tire shop. I'm getting around 200 miles of range with dirt bike on a hitch carrier. Not bad but I'm curious what range everyone is getting...

Just put the medhod wheels and Toyo! Lift next? 😁

Nice!

Thanks! And I’m glad that I can now use this lift kit! 😄

Thanks for the clarification. I’m not saying I’m an expert 😄 I just posted this information for discussion. If you’d mentioned in more details in your website about how these spacers are designed to not cause any issues, it would’ve been better. Its good have opinions and discussions when it...

Reason why using spacer lift kit is bad:

Reason why using spacer lift kit is bad:

Also what are your opinions on adding spacers? I remember Lee chan was mentioning rear wheel is not flush. I ordered 20mm rear spacers from Tsportline but not feeling confident about putting them on as there are mixed opinions especially for safety concerns...

I just got my 502 method rims and tried installing these TPMS and they fit good....not sure what people were talking about here...may be they used wrong cheap ones lol

Thanks. I think it'll be very helpful if you guys put on instructional videos on youtube. There is a lot of confusion out there.

@jcan Were you able to install after market TPMS? I just bought same method wheels and Bluetooth TPMS from Tsportline. Hope they'll fit...

Isnt ride height same when i remove jack and car is on its own weight? I can drop the jacks and then tighten them? Why I need to jack up the knuckle ?

@MountainPass Now that i got your attention, I have a question::) "The rear is very straightforward, the most important step is retorquing the bushings at ride height, not at full droop!" "Use the jack to raise the rear knuckle to ride height, and torque the two 21mm bolts to 80ft-lb." With...

Is the issue with bluetooth connection or fitment of TPMS on method 502 wheels?

Which year is your model y? mine is 2023 im picking it up this week.

Tsportline has a very easy to follow steps. MPP installation is exactly the same i believe as they are same kits:

Strange I bought these from amazon too but the price was higher. Sold by Tsportline too but the ASIN (B09XC129Y4) is different than what you bought: https://www.amazon.com/gp/product/B09XC129Y4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

These are BLE. For tesla you need Bluetooth ones

I bought Tsportline Bluetooth TPMS for Model Y. I hope they'll fit! https://tsportline.com/products/tesla-tpms?variant=42380429230274

Changing stock 20" induction to these new 18" rim and tires wont need any alignment i believe?

I bought class 3 hitch which has a tongue capacity of 350lbs. Saw some other guys did the same !

I'm assuming you did not get camber arm since tsportline dont sell them or suggest anywhere. But if you buy MPP kit they do highly suggest to buy camber arm from them. Wondering if you discussed this with tsportline?

Anyone using their model y to hitch dirt bikes? I ordered a class 3 hitch with 350 lbs tongue weight. My dirt bike is around 230 lbs

Great thread with lots of information here...Thanks!! I'm picking my 2023 Model Y long range this week and already placed an order for: 1. Method MR502 18X8 +38 5X114.3 2. TOYO OPEN COUNTRY A/T III 255/55R18 109H XL TL 3. STANCEMAGIC Hubcentric Rings - 64.1mm ID to 67.1mm OD @BobbyLeeChan...