Search results

Do you also feel the brake pedal is kinda soft? My new MYP does the same thing and my M3P did not have this at all. But the only other difference for me is that the brake pedal on the M3P was much harder and sensitive than this one.

I have a brand new set (60miles on wheels and tires) of 21" Uberturbines from my MYP. I am looking to make my setup square my using 4x 21x9.5 wheels. So I am looking to trade your front wheels/tires with my rears. I can make the same thing with rear wheels however I would like the narrower...

Try Facebook market place. I don’t have a delivery date yet but the 19” geminis with aftermarket wheel covers are ready in the garage for my yet to be build MYP ;)

EDD1: June 22 - June 30

MYLP Blue 5 seat - Black Tow hitch OD: June 6th ODD: June - July Delivery Appointment: VIN: Location : San Francisco Bay Area

Hi where are you located?

Sorry didn't respond to this earlier. here is a photo of the close up for the male and female side of the cord.

both sides are the same, one male one female. it is a 14-50 on both sides. But I will add some pictures later tonight.

This is a 30ft extension cord that I had bought from Evannex. it is a Nema 14-50 extension cord. It is very thick so no problems with over heating. I have used this for my model S with no problems but since then I have installed a wall charger with a long cord so don't need this any more...

I am local. SF Bay Area. Have you found a place to install them? I am interested...

Couldn’t find your post for the sale of 19” Wheels. I am local and interested

I have has this exact clunk almost since I got my P3D couple months over a year ago. I am at 18K miles and it did not change over time. But It doesn’t seem to be as repeatable as it looks from the videos either. I have been to the service center with this complaint and they told me it is normal...

SoundBySully, what are your offsets? Do you know the weights for the fronts and rears? Love the look of these...

ok, took my car in and it is confirmed that she needs a new compressor.

Good to hear that Big Earl... I think the compressor had an issue for a while. It just became very noticeable.

I just started having this issue couple weeks ago. When the AC is on, every 15-30 seconds there is a loud deep noise as if some motor is winding down. There is a slight vibration that I feel behind the firewall when this happens too. I am taking it in next week.

I have talked to the installer they said, they did not remove the brakes for the install. This seems to come and go. I think it has more to do with temperature than humidity. I think this happens more when cold. Since I am on heavy regen and try to not sure brakes most of the time, it is safe to...

Do you have any idea what the total weight of the wheel is ( including TPMS and the Tires)?

I have the same exact problem. I do have unplugged performance moderates so I am thinking that could have something to do with the noises but I haven't really done anything to check them yet.

I was wondering if anybody has a guess to why this is happening and how to fix it. For additional info. I have UP moderates installed and aftermarket wheels. I wonder if something went wrong during installation. I believe the break pads comes off during installation. When I am going...

Mine developed some noises. Hard to explain but creaking might be the right term. When I turn the wheels when stationary...

i have the unplugged moderates on my P3D+ and I can guarantee you it is more of a wheel/tire thing then suspension. I drove with the stock 20” wheels for sometime ( after the spring installation) and then switch to after market 19” wheels with some “green” oriented tires and that made a huge...

VMR 710s are cast wheels and the 701s are flow forged. Main difference is that 701s are lighter and stronger. I believer they are about 3lbs lighter. That is a good amount of weight saving for rotational mass. The difference for you, might be better steering feel and better efficiency. ET35 is...

I didn't want the ride to be any harsher then factory. I wanted the lowering more for looks... After the fact though I have to say the biggest difference in handling was caused by the wheels/tires. When I switched to UP Moderates I was on the 20" wheels with the Michelin 4S. Handling became more...

Any chance you will be in the San Francisco Bay Area? I would swap my wood dash with you.

Sold for $1400 but that is below market. I just wanted to get done with it.

Sorry, these are sold

Sorry don't believe that is a reasonable offer (but no offense taken) . And even if one person sold it at that price, I don't think that is the market value, yet.

Surprised their is no interest...

I had these wheels on my P3D since purchase, for about 11K miles. One of the wheels have a curb rash and one other has a small chip, the chip is only noticeable on close inspection, the rest is good. Tires have 11K miles, 2 of them have 6mm tread left ( still on green) ( measured with tire...

I have been fighting back and forth about chrome delete in my mind. I don't really like the flat black chrome delete, if I do it I would do something like a shiny charcoal or maybe even a matte silver. But I haven't decided yet. The thing that really bothers me is the color of the hubs. I might...

Continentals ( at least these ones) are considerably more silent. They are supposed to be better in range too, however I have multiple factors effecting range so it will be tough to judge that. Maybe after a month of driving I can have reliable data. These wheels are wider then stock and the...

After so much time, I finally got my wheels and tires installed. TSW Bathhurst 19"x9" +30 all around. 245/40/19 Continental Purecontact LS I believe I saved around 4-5lbs per corner with this setup.

you don't happen to have the easy close frunk mod right? This mod is done by replacing the spring on the release latch with a lighter spring....

Still waiting for the update in Northern California :rolleyes:

Here is a comparison of UP moderates... I will hopefully install some aftermarket 19" wheels this weekend

Decided to go aftermarket, so I am not looking anymore! Thanks

I will post photos in a couple of days since I haven't received the wheels yet. But I am lowered...

I just got it too. But I am 80miles away so not sure what is new

I see thx!

I would be interested too, I am in the San Francisco Bay Area...

Just got it too. But I don’t see the software section under controls on my app.

Already ordered... I have been looking for wheels for such a long time that I am kinda burned out. Don’t want to think about it any more :)

Do you have a P3D or non-P? The offsets are different on the P cars. The hub is 5mm more inside for the P3D. My observation is that 15mm for the front 20mm for the rear is the max. This is for a lowered car ( mine is lowered ). If you have a 19x8.5 +30 on a non-P the wheels move 10mm outer...

Just to let you guys know, I was looking at tire weights. Michelin PS4 235/35ZR20/XL - 24.5lb Michelin MXM4 245/40R19/XL 98W 28.8 lbs Continental Pure contact LS 245/40/19 98V 25.1lbs Some tires can easily wipe out the gains from going rotary forged or forged...

BLOXSPORT 7075T6 5x114.3 64.1 for Tesla Model 3 perfermance [BLM Series] - $165.00 : BLOXsport Wheel Spacers, Aluminun 7075-T6 Forged!

Love the T-R10s, if they offered it in 19", I would have ordered that in a heart beat.

BLOXSPORT is one I keep running into but haven't had a first hand experience with them,.

I am ordering Michelin Primacy Tour A/S. Need something all-season... I hate the fact that the PS4s can't be at freezing temps.

I finally made a decision. A wheel set I had not even considered before. TSW Bathurst. In 19x9” +30 which is 12mm further out of stock offsets. The wheels are 21lb each, almost as light as a budget forged wheel like titan 7. With tires and TPMS shipped $2650...