Search results

This marketplace listing has expired and has been removed.

This thread is for the general discussion of the marketplace listing Tekonsha 118875 trailer wire harness for Model Y (21-23). Please add to the discussion here.

The one I thought was it was the right one. I just never could get a reading without actually tapping the wire but thanks for the heads up as it turns off WAY faster than I was expecting.

Does this stay powered with sentry mode on? I tried finding this wire on my 2023 MYP and couldn't seem to get a voltage reading on any of the Red wires using a clip type multimeter.

Did you power it from pinouts on the gateway or plugged it into an outlet close the the gateway? I don't have any outlets anywhere close.

What host name does it show after you SSH into it?

Are you putting the teslausb_setup_variables.conf file on the card after you load the image and before you fire up the card in the raspberry pi? Are you putting it in the root folder of the card? There should be a .sample file in the same folder already.

I set this up a couple days ago (for the second time) and it appears that the default hostname code/logic isn't working as you have also encountered but everything else seems to have worked. In the config file there is a host name override that you can set (e.g. set to 'teslausb') and it should...

SOLD!

I still have it and it works like new. I ended up buying the Nomad charger because I thought it looked better but probably wasn't worth the price difference, lol.

still available

Selling a slightly used Jeda Qi Wireless charging pad. $110 shipped new, $85 shipped Tesla Wireless Pad

How did you get into service so quick? The earliest slot I see is out over a week too and I have the same issue.

I have the whole front done on our TM3. I have a partial done on our other car (Ford Flex) and while I don't hate it and it's better than nothing, if I were to do it over again, I would have the whole fender and hood done. It's a noticeable seam up close if you don't do a whole panel area and...

That sounds really good depending on how much of the bumper is covered. Does it include any of the fenders?

PPF on just the front, especially if you are doing just the bumper, should be well under 2k ( not saying 2k grows on trees or anything ). Ceramic coating also will not provide any chip/rock protection.

I would think processing applications and re-sending stickers every year would be more costly than sending a plate once and then just collecting the additional plate fee every year like AZ does.

I got my application returned a month after I sent it claiming that the proper paperwork from the dealership wasn't yet submitted. I included my VIN on my application but not my plate number since I didn't have that yet even though I DID have the car. I just put it in another envelope and...

I have these too. Pretty happy for the price.

This project is pretty old and looks dead. Link

The mirror in the 3 is powerless isn't it?

I'm planning on hardwiring a radar detector too. I was planning on tapping into the 12v switched cigarette lighter because I was told there is no fuse box on the 3 nor is there a switched power source up by the mirror. I don't see how the mirror tap would work.

FWIW I got it done in 1 piece with F1 Pinnacle by Smartfilm in AZ. He had to special order film to fit and was able to do 1 piece but it took 3 tries. He said he wouldn't do it in 1 piece again on the 3 because it was ridiculously hard. He assured me that they could do 2 piece along one of the...

Where are you taking it in San Diego and how much?

Based on prices here in Socal, it would probably be cheaper for me to ship it to GA and back to have it done based on that price!

There is review thread of one that looks similar to the RubberTite ones .

I really like how they cover the entire back floor. May have to get some when I get my Model 3.

If you could embed 2 of these that would be perfect! I'm still waiting for my invite otherwise I'd offer to help :(

Is there room for two of them next to each other? It looks like from the pictures it's slightly wider than a single phone.

Definitely interested as well. Hopefully some vendor is already working on this.