Search results

Sorry for the late reply. The V1 aero shield does not fit the V2 bumper. You have to buy the V2 aeroshield for the bottom.

I’ll send you a PM

You just go to the EPC site... find the refresh part numbers, and then open your Tesla Mobile App and request "Other" service and list the part numbers you want to order. Generally, they won't ask questions since they received your order through the app. They may ask because it's the wrong...

Sorry for the late reply, but you can find the Etsy shop for the gap filler in my profile.

Yes, the gap filler is the very last thing to install. I recommend to everyone to wait and finish the refresh and then contact me if they need one.

I make the gap filler ☺️

Move it to just behind the grill in front of the radiator where air can get to it

Sure. Sending you a PM.

LOL, Two years later and COVID happened, but I still have this bumper. I need to get it out of my garage. $250?

Congratulations! It looks great!

Make sure you do something about the gap to prevent water intrusion.

I would, but I'm 99% sure it's a violation of forum rules due to some personal information. The best thing to do is just PM me, and I will send you the link.

Yes, sending you a PM.

Yes, but I don't advertise on the forums because it's against the rules. Send me a DM.

We stopped on Knoxville supercharger during our trip home from spring break and the cherry blossoms had bloomed! Also, hands down Knoxville supercharger is in one of the best locations I’ve ever seen. The shopping center has everything. I’m kind of jealous...

I'd like to see how that looks and fitment. If it looks good, then I may consider it too.

Yes, I recommend buying a used bumper and having it repaired and painted to match. Much cheaper than buying new. I don't have any experience with the X parts on the S. I just sell the gap filler until someone finds a better solution. I think most people have been happy with my part. It's...

PM me for the parts list in a google spreadsheet

You guys still have a gap between the Vbar and the old hood. Consider ordering my gap filler piece. ;)

Pre-facelift hood: Here's a link to the parts spreadsheet that was put together by some of the forum members. Model S - Bumper Refresh Parts List Here's some photos of before/after with the bumper gap filler. You can see it just below the hood line. Note: I sell these for $100 free shipping...

Yes I can ship to AUS. Email me at [email protected]

Do you still have a gap between the grill and the hood? Do you need a gap filler? I make them so PM me if needed.

My bumper gap filler will help prevent water intrusion.

Please post a picture

It looks like your hood goes down too far. Did you remove your bump stops?

The old louvres don't fit the new bumper. You have to either 1) cut new bumper to fit or 2) buy new version of the louvres

I figured it out. It's this one: Oris AK11 Towbar Keys - Replacement Keys Ltd

I was just responding to what Rayminster was saying: You don't "have to go the full way". It's personal preference. It might bother a few people, but I think it looks totally fine. Especially if you shorten the T badge so it doesn't stick out so far past the hood.

9/10 won't even notice

I PMed you

I didn't want to botch it up so I bought new ones.

Does the UP Vbar fit the OEM bumper?

Thanks so much for the post! You've by far made the best video of the process. I didn't have the guts to cut my bumper, so I bought the new louvres which are a direct fit. Anyone scared to cut the bumper and mess it up, just buy the new louvres which are plug and play. One thing you didn't...

I ran into the same issue. It still fits but it's a very tight fit. There may be a few people who have an inch too short. If someone could come up with a cable extender with the same connectors... I'd be willing to pay money for it. Maybe $50 a set of extenders or something like that...

I believe he's talking about the 3D printed part that I make for the gap between the bumper and the hood. I already replied to him.

I also sell the STL file.

I make them per order. I just mailed one to Netherlands.

What we did is cut the T-badge across the screw holes and then drilled new screw holes or use self tapping screws. It looks much better that way.

Yes, that's the correct list. It has the aero shield.

Even though I make the gap filler part for the OEM install, I still encourage everyone who asks to go with the UP bumper refresh if they can afford it. It looks better and you get service and support. For everyone else who absolutely just HAS to have OEM, I offer an alternative, but know that it...

There is a gap, but if you trim the T-badge it looks pretty good. Take a look at this post from member Wratran:

That's just crazy. It's as if they accidentally a zero. Should be around 300.

That’s so annoying. I wonder if they started implementing a new policy. My SC never gave me any trouble. If you can find a parts guy in your SC, you can try emailing them the parts list and see if they will order it for you. Often the parts guys can get around rather than the service reps.

Link to the previous photo from Home Depot: Everbilt 0.78 in. x 12.2 in. Stainless Steel Gate Latch Cable-18624 - The Home Depot

That won't work because the screw holes are directly on top of the plastic and screw downward into the T-badge. The hood closes snugly on top of the gap so it's all sealed up. One thing you could do, however, is to tie a string to the latch and run the string down to the lower bumper grill or...

Nice job on the carbon fiber wrap! It blends in with your setup. Tell me a little more about that radar plate you put around your radar.

PM me an offer if you're still interested.

Wow, we get turtles, alligators, hogs, deer, but I haven’t had a coyote yet.

For sale is a Model S bumper with some normal wear and tear. 60K miles on the bumper, could use a fresh coat of paint. Includes the Louvres, grill insert, and nose cone. Louvres are the expensive part. This is the AP 1.0 version. Asking $500 for all of it, or I will part out the nose cone...

19" Factory OEM Tesla Model S Wheels rims Goodyear Tires with high tread and TPMS sensors Tires are 245/45/19 Goodyear Eagle Touring TPMS sensors included Look at pictures for road rash Asking $800 in Melbourne, FL. I'm motivated to clear out my garage, so I'm considering all offers.