Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

License Plate Wrap with customer StickerKnight PPF film.

This site may earn commission on affiliate links.
So, I finally got around to mounting my front license plate from License Plate Wrap. This is a California legal front license plate that's vinyl instead of metal; so it sticks to the bumper.

Instead of sticking it to the bumper, I got a custom PPF sticker from StickerKnight, stuck the license plate to the sticker, and stuck the sticker to the car. The sticker is made of PPF film, at attaches to the bumper with water. Removal is as simple is pulling it back.

https://i.imgur.com/K1D4GoC.jpg

https://i.imgur.com/MRpGjf2.jpg

https://i.imgur.com/XamTPhv.jpg

https://i.imgur.com/qrcwCiY.jpg

https://i.imgur.com/df7c6w8.jpg

For those that would like to see how easy it is to remove; I had to replace my carpool sticker, and I used the same PPF film from StickerKnight for those. You can see as I pull back the film, the VOID stuff sticks to the PPF, but the PPF comes right off the car. Afterwards (and a wipe with a microfiber cloth) I could not tell the HOV sticker was ever there...

https://i.imgur.com/nSW31Qx.jpg

https://i.imgur.com/W6N1AF0.jpg

https://i.imgur.com/jP13fIT.jpg

https://i.imgur.com/p2FybUn.jpg
 
  • Like
Reactions: BlueOvalFan
So, I finally got around to mounting my front license plate from License Plate Wrap. This is a California legal front license plate that's vinyl instead of metal; so it sticks to the bumper.

Instead of sticking it to the bumper, I got a custom PPF sticker from StickerKnight, stuck the license plate to the sticker, and stuck the sticker to the car. The sticker is made of PPF film, at attaches to the bumper with water. Removal is as simple is pulling it back.






For those that would like to see how easy it is to remove; I had to replace my carpool sticker, and I used the same PPF film from StickerKnight for those. You can see as I pull back the film, the VOID stuff sticks to the PPF, but the PPF comes right off the car. Afterwards (and a wipe with a microfiber cloth) I could not tell the HOV sticker was ever there...

https://i.imgur.com/nSW31Qx.jpg

https://i.imgur.com/W6N1AF0.jpg

https://i.imgur.com/jP13fIT.jpg

https://i.imgur.com/p2FybUn.jpg
Nick, can you send a link to the pre-cut PPF from StickerKnight that you stuck to your License Plate Wrap before attaching that to your car? I can find the pre-cut PPF for the HOV stickers, but not for the License Plate Wrap license plates. Thanks.