Model Y lowering springs

[Freshness]

Not sure if I needed camber arms or not but I just bought them anyways. They’re super easy to install during the spring installation, and there’s cheap sets out there. I have MPP but there’s 200 dollar kits from what I’ve seen.

 

[RC_MoD_Y]

How long did you had yours for?

 

[Zain Kolsy]

Has anyone lowered a Model Y Performance on Eibachs then gotten thicker tires? I'm lowering mine soon (with spacers.. 14/20) and wanted to know if I'll have room to add a slightly thicker tire.

 

[tom @ eas]

Not on Eibachs, but just to show what a slightly taller tire looks like.

 

[mrdeealexander]

This was a fun and quick mini-build for one of the members of Swedish Metal band Ghost, dropping by for mods in between shows. Just got this fresh from the Texas factory and only on the road for 1 day, this has the updated door trim and rear parcel shelf. Enjoy!

Mods:
- Eibach Pro Kit Springs
- H&R 14mm/20m spacers
- Hansshow Carbon Steering Yoke Wheel
- Hansshow Swivel Tilt screen
- Hansshow 3-piece Carbon Dashboard/Door Trim
- Hansshow Carbon Center Console Trim
- Blackout Hood/Frunk/Steering Wheel Emblems
- Blackout Dual Motor badge

This looks absolutely gorgeous! I have a set of H&R springs sitting in the garage. I'll get them installed one of these days. Good work, Sir.

 

[Schnitz]

H&R springs
AG M621: 20x10 +35 & 20x11 +50
Nitto 555: 265/35/20 & 295/35/20

 

[PHVNTOM]

I'm waiting to see someone with an LR install these. I was going back and forth between Eibach and H&R, but I really didn't want the front much lower than the Eibach specs. This is despite the fact that I personally don't like the look of a car with a larger front fender gap than the rear. I'm happy with the Eibach setup, but I might make a change after seeing some pics of the H&R's installed on an LR.

I recently just had H&R lowering springs installed on my Model Y LR, check out my instagram for pics! instagram.com/modelyphvntom/

 

[P3D-R]

I recently just had H&R lowering springs installed on my Model Y LR, check out my instagram for pics! instagram.com/modelyphvntom/

Looks great Tom. Can you measure hub to fender for me please? HR published 1.7" front and 1.4" rear which I like better than the reverse rake on Eibach. My concern being compression stroke on the shocks though. In your opinion how is the ride? I've known HR to settle a lot in a year so that's another thing I would want to keep my eyes on. We're about to release a video with the Tein Endura Pro Plus adjustable shocks on the Y vs OEM MYP suspension. That might be a nice addition to these springs for a comprehensive setup.

Tom's Y from his IG page is below. He's rocking 20x10 +45 and 275/40/20. I'm about to install some 20x10.5 +40 with 295/40/20 because I got a killer deal on them.

 

[Kilowatt-Zot]

The height / stance on the H&R's looks just about perfect. Curious how the ride is on the Y with them? My experience with H&R springs in the past is they tend to ride harsher than Eibach's & I'm concerned with going that low for our part time 'family' vehicle in Michigan (winters and poor roads). The lower rear on the Eibach's looks a little off and will be even worse with kids and gear in the back.

 

[Ysocal]

View attachment 866102

H&R springs
AG M621: 20x10 +35 & 20x11 +50
Nitto 555: 265/35/20 & 295/35/20

You MY looking great!! How do you like the ride with the H&R’s?

 

[Kevin_PR]

Hi, how's the ride on eibach or H&R springs? I have heard that lowering springs tend to make right quality a bit bumpy. Also tesla is a heavy vehicle. Any difference between stock springs in ride quality besides been lowered?

 

[fredzos]

Looks great Tom. Can you measure hub to fender for me please? HR published 1.7" front and 1.4" rear which I like better than the reverse rake on Eibach. My concern being compression stroke on the shocks though. In your opinion how is the ride? I've known HR to settle a lot in a year so that's another thing I would want to keep my eyes on. We're about to release a video with the Tein Endura Pro Plus adjustable shocks on the Y vs OEM MYP suspension. That might be a nice addition to these springs for a comprehensive setup.

Tom's Y from his IG page is below. He's rocking 20x10 +45 and 275/40/20. I'm about to install some 20x10.5 +40 with 295/40/20 because I got a killer deal on them.

View attachment 894299

damn...that is looking soo clean!

 

[Schnitz]

You MY looking great!! How do you like the ride with the H&R’s?

Stiffer. Not too much but it definitely didn't help the comfort.
Handles better though. Waiting for sway bars to arrive. Gonna be a fun summer!

 

[warrior15r]

@tom @ eas I just took delivery of 2023 LR Model Y 7 seater with the new comfort suspension. Can the eibach springs be used on my 7 seater? Is there any difference to worry about? Also, I’m in Anaheim as well. Do you guys do install?

 

[tom @ eas]

@tom @ eas I just took delivery of 2023 LR Model Y 7 seater with the new comfort suspension. Can the eibach springs be used on my 7 seater? Is there any difference to worry about? Also, I’m in Anaheim as well. Do you guys do install?

Compatible with both 5/7 seaters. We have Eibachs in stock and perform installation as well, feel free to contact me directly or drop by and I can answer any questions you have.

 

[hoss_vw]

Has anybody installed the Eibachs with a 2023 Comfort Suspension yet? Curious if there is any change in ride quality.

 

[King Styles]

H&R springs
22x9 +33 265/30/22
22x10.5 +38 285/30/22

 

[PHVNTOM]

damn...that is looking soo clean!

Sorry haven’t checked this thread in while! Thanks, I love the look of it!

 

[PHVNTOM]

View attachment 953089View attachment 953090View attachment 953091

H&R springs
22x9 +33 265/30/22
22x10.5 +38 285/30/22

H&R is the way to go, looking so tight with the massive 22”s

 

[tienngo1012]

@King Styles Nice ride! Just curious what your energy usage looks like. I run 20s and was wanting to potentially upgrade to 22s.