M
mr_hyde
Member From Seattle
Latest activity Postings About
-
-
Mmr_hyde replied to the thread DIY Tesla Drive Unit Repair.Many thanks Howard for the thought collaboration and loaning your leaky LDU for the measurements, test fitment and first install of this...
-
MWhat would be a bonus, is if we could get a baseline rotor temp (using the same or similar setup) before modding for coolant delete.
-
MLOL. Dammit.
-
Mmr_hyde reacted to EatsShoots's post in the thread Experience with Tesla Collision Repair with
Like.
In my city of 1M (including suburbs) we have just the one shop, and not only will no other shop work on collision damage, but I... -
Mmr_hyde replied to the thread Experience with Tesla Collision Repair.Full coverage on my 2014 P85D is over $2,000/yr and collision is nearly $1,300 of that. I'm 50+ with no accidents and collisions, etc...
-
Mmr_hyde replied to the thread Tesla Fort Worth Service Center won't sell me parts.My SC blacklisted me when I asked too many questions about HV battery pack parts listed at OTC. To their credit, the next time I...
-
Mmr_hyde replied to the thread Third battery has failed - need advice.To the OP: Sorry you are going through this. As mentioned, the tesla reman packs are really sketchy in quality. They basically take a...
-
Mmr_hyde replied to the thread DIY Tesla Drive Unit Repair.What are your thoughts on a stainless cap pressed into the 55.0mm to 54.9mm bore? Would 55.1mm be too tight at the bottom and cause the...
-
Mmr_hyde replied to the thread 2014 P85d High Voltage Failure.I bet you a six pack of your choice the two 'bad' bricks were totally fine and the capacitors on that BMB just rotted out. There is no...
-
Mmr_hyde replied to the thread DIY Tesla Drive Unit Repair.It is a shame we can't source a 55mm/30mm seal like this because it is the correct application for our motors. I'd bet Tesla looked...
-
MThere is likely a very robust EV motor coolant seal technology that already exist. However, it is unlikely the aftermarket or DIY...
-
Mmr_hyde replied to the thread 2014 P85d High Voltage Failure.My 2014 was December 2014 but the battery was replaced in Q1-2015. It was a new pack and I'm not sure 'why'. The original owner...
-
Mmr_hyde replied to the thread 2014 P85d High Voltage Failure.Gruber has a video showing an oscilating tool. The blade needs a step in it to work correctly. I used the side of a breaker bar which...
-
MHere are some things I would like to see, UI Based Improvements 1. Increase the icon size of the bottom task/function bar. 2. A second...
-
Mmr_hyde replied to the thread DIY Tesla Drive Unit Repair.If the Rev U and other coolant delete options being to crash and burn(up) bearings over the next couple years, this will be good...
-
-
Loading…
-
Loading…