Search results

How does the Watch for Tesla app deal with multiple Teslas? Such as having a complication for opening the trunk, how does it know which trunk? Could you have a watch face for each Tesla?

I have been looking at SeaSucker and Stag to use my existing snowboard attachment and cargo box on my Model Y and Model 3, but neither one had an aerobar solution. I just found that TreeFrog has a vacuum cup solution with aerobars!! I emailed them this morning and they replied right away and...

1st bullet point above should have said SR, MR, and LR RWD are all single motor.

Sorry, I did read your reply but wasn't 100% sure about the mid-range. I've double checked and it is RWD as well. So the SR, MR, and LR are all single motor and should have the smaller front sway bar. MR & LR RWD have the smaller rear sway bar. SR does not have a rear sway bar. LR AWD and P...

I've seen that video and it is helpful (thanks) ... and that's what I plan to do. But I want to get a bit more information and decide whether it would be best to get the 16mm or the 19.6mm rear bar and which vehicles they originally came from. As well as figure out if I have the 28mm or 29mm...

I installed the springs and spacers at the same time and removed the aero covers. Springs are said to increase efficiency since there is less air going under the car and the other 2 will decrease efficiency. The number of miles shown is highly dependent on recent driving style and weather, so...

Good discussion ... but anyone have any more info on which OEM bars are for which models? Also anyone have any comments on which OEM bar would be best suited for the SR? I know sometimes you can over due the rear sway bar at which point the backend breaks loose and/or you get oversteer.

The parts catalog shows 2 front sway bars and 2 rear sway bars. Does anyone know which ones are used on which models? I would guess the largest ones (both Front and Rear) are for the Performance. I just found out the SR does not have a rear bar. The SR does have a front, but which size. What...

I did not change my sway bar end links (still running stock). it handles great and rides very nice. (updated verbiage to reduce confusion, thanks @Electric Dream )

I have over 11k miles on the Eibachs and I think the ride quality is much better than factory. It sits pretty level, just a tiny bit lower in the front - which I am ok with. Not a single squeak.

I couldn't be happier with the Eiback springs, 15/20 Blox Spacers, and Aeros with 235/45R18 AS4 (same size as the stock MXM4, but much wider tread width) on my SR (not+).

I connected the Hansshow DIY cable enabling all speakers (pretty much the same as the Tesla Offer one) and been jamming my RF P300-8P for 7-8 months now with no issue.

I have the TapTes rear cargo mat and really like it. Very similar to 3D Max.

I'm wondering the same thing. I believe the OEM rack is made by Yakima. I'm not sure why Thule hasn't came out with something yet. I heard that Yakima may have exclusive rights for some period of time ... kind of sucks. $450 was too much, but now $500 is crazy. Brian from i1Tesla has been...

I agree. Most of the colors are very hard to match with vinyl. I had ~5" scratch on my front bumper that I decided to get fixed. Since it was already at the body shop and they had paint mixed up, I had them spray the handles as well. At one point, he quoted me $200 but ended up not charging...

Finally did the Dark Satin chrome delete!! And I'd say that I finally got the looks where I want it... Exterior mods: Dark Satin Gray chrome delete Color matched (painted) door handles Factory performance spoiler Eibach springs 15/20mm Blox spacers 35% tint Working foglights (this is an SR)

Finally got the looks where I want it... Exterior mods: Dark Satin Gray chrome delete Color matched (painted) door handles Factory performance spoiler Eibach springs 15/20mm Blox spacers 35% tint Working foglights (this is an SR)

There is 12v power under the rear passenger seat. You can use a ring terminal to get power there. You need an inline fuse with 1-2 feet - you can see mine, its blue-ish with thick red wire in the attached pic. I got my ground from the bolts circled in the same image.

Oh great!! Bass boost I have at zero. I had it about 25% and it was way too boomy. Its not boomy at all at 0. I should try turning it up just a little bit, but it sounds really good the way it is. I connected the remote gain knob and mounted it where I can reach while driving. With the remote...

I really liked the Polynesian elevator music, but now its gone! Seems to be replaced with Caribbean, which is fun but I don't like it as well. I guess I can just load an USB stick with some sort of Polynesian elevator music, but I didn't really want to bother with that.

Polynesian elevator music was one of the BoomBox sound options, and I loved it.

I really liked the Polynesian elevator music, but now its gone! Seems to be replaced with Caribbean, which is fun but I don't like it as well. I guess I can just load an USB stick with some sort of Polynesian elevator music, but I didn't really want to bother with that. Can you use the USB Stick...

Any word on any aftermarket options? Thule or Yakima or ______? I believe someone makes one for the Model 3. Often aftermarket are cheaper and more versatile.

I had it in the center console and yes it definitely works. But it had some trouble if the music was really loud. Also I really like to see the blue light to see if it is listening to me. There are some areas with poor service and I didn't know if it didn't hear me or if it wasn't doing...

I have one in the Model 3, but didn't put one in the Model Y yet. It works great, I use it all the time. Listen to music, make announcements at home, open/close garage door (via Tailwind). I have the TapTes Pro USB Hub and I drilled a hole out of the bottom of the center console, then stuck the...

The SR to SR+ upgrade is $5k, based on the original difference in price between the 2 ($35k vs $39,990). The AP upgrade is $3k (it was on sale last summer for $2k). If you already did the AP upgrade, some have gotten the remainder of the upgrade for $2k .. this includes range, acceleration, and...

Yeah, I saw that new set! That is a great price and look like very nice mats. I do like the pattern I have a little better, but it is certainly not a deal breaker. This set was not available when I bought the mat posted above. I just contacted them to see if I can get just the Frunk and...

Check these out. They are basically the same as the maxpider but on sale right now. TAPTES All-Weather Floor Mats for Tesla Model Y 2020 2021 I just got this rear cargo mat and really like it. Again it is the same as maxpider, but I like the pattern much better. Also it does not have "velcro"...

The way I understood it, someone added AP 1st then somehow negotiated a $2k upgrade to a full SR+. I am not sure if they would do it the other way around. But I could be wrong.

Thanks! It was important to me not to take up any usable space. But if anyone doesn't want to hassle with squeezing the Rockford Fosgate into the factory location, the P300-8P (and even the 10P) fit nicely in the sub trunk. I tapped my signals from L&R front woofers in the Hansshow harness. The...

It has a remote (wired) bass knob, so you can basically turn it off or crank it to way too loud (vs the other speakers). It is plenty loud for me, I typically have it between 25-50%, but of course your tastes might be different. I believe the stock sub is also 8" and ported, those would be the...

That looks like a really great system! I was going to go that route, but I got the Hansshow harness for $80 and the sub for $220 ... can't complain for $300! Anxious to hear about your install.

I ordered the cargo mat on Black Friday and it just arrived over the weekend. I absolutely love it!!! Same as maxpider material. Fits very well. Love pattern. You can easily open the false floor and it still stays up.

I posted this over on the nearly 50 page Hansshow Audio Upgrade thread ... but since that one can be so overwhelming. Well, the Rockford Fosgate P300-8P will fit in the factory location!! I installed the sub along with the Hansshow DIY harness. My SR is a 12/19 build so I have the rear parcel...

I wasn't expecting 50k out of them or anything... Honestly I wouldn't have been that surprised if I only got 20k, but under 9k is pretty ridiculous.

Well, the Rockford Fosgate P300-8P will fit in the factory location!! I installed the sub along with the Hansshow DIY harness. My SR is a 12/19 build so I have the rear parcel speakers. But my harness had those left and right reverse, so I had to switch the wires (there is a youtube video out...

I have an SR with Eibachs installed for the past 7,000 miles. I did NOT do an alignment. Tire wear in all 4 corners is very even, but my rears are at the wear bars after 8,600 total miles. I do not feel that I can fault the springs or lack of alignment. I just enjoyed driving too much.

Cool, thanks man!

Thanks so much for the pics and details! It looks good ... cool roof rack (what do you carry?) Mine is an SR, so probably should keep range in mind. Seems like mine is a little lower than yours. SR and LR do use different springs, so they might just sit a little different. Or maybe it just...

Did you rotate them at all? I typically rotate at 5k, but didn't get a chance until 8,600 miles. Mine is RWD which makes it worse.

That's awesome! Can't wait to see them. Do you like the wider tire? Do they look too chunk? They are a bit bigger diameter - do they rub at all since you are lowered? Do you have spacers? How many miles did you get out of the stock tires?

Any one have pics of 245/45R18 tires on their Model 3? I was going to rotate my tires on my 2020 SR and found the rears are down at the wear bars at 8,600 miles!! The fronts still have some life on them. Wear on all 4 is very even. I've watched my pressure. I wanted to rotate sooner, but lost...

I have this issue in my 2020 SR3 and 2020 LRY with my Galaxy S9.

I love the simple look of the Tesla cargo mat. I don't like the crazy pattern on the maxpider. I have the Taptes ordered - due to ship mid-December. How does the Tesla mat work with the sub-trunk? I might cancel Taptes.

Well, I decided to try an stuff the Rockford Fosgate P300-8P Punch in the factory location. I made a mock-up out of cardboard and it is very close to fitting. Mounting brackets are going to be very odd shaped and I am pretty certain the trunk carpet is going to bulge a little bit. If all else...

I've used anti-seize in the past ... not sure why I didn't think to use it on these. I'll have to work on them a bit more sometime. Thanks for the suggestions!

I've had BLOX spacers installed for ~8 months / 7,000 miles. I was going to remove them for the winter to reduce winter road spray and they are completely stuck. To be fair, I only checked the passenger rear but after removing the nuts, tapping on it from every direction with a hammer, and...

I have 8,600 miles on my SR and when rotating them yesterday I found the rears are basically at the wear bars!! Stock 18". It was pretty even, so at least that is good. I rarely do any 0-60 stoplight launches. I do accelerate hard from rolling on occasion. And once per week I do some spirited...

I have. They are around $200 without the amp. It is not easy to use the factory amp because the proper signals are not easily available. I believe the factory sub is a dual voicecoil which makes an aftermarket amp more difficult. Hansshow and a guy on the forums (Clancy) both sell OEM like...

Thanks for the update. I heard they you can no longer get the SR with the 2021. I'm not sure if that is going to make it less likely for the upgrade price to drop or not.