Search results

I used Tough-Seal 21 by Key Polymer 17 Shepard St. Lawrence, MA 01843 phone 1-978-683-9411. It might be overkill but its what we use at work for potting wiring in sewer manholes. I knew it would work. It is a duplex tube and I was able to used the company duplex applicator gun that uses a static...

Yes I repotted the diodes. It was about a half hour of work for each panel. Diodes were just over $1 each and the potting compound was about $5 each. I went with the same type of professional potting compound we use at work. Stuff works great.

Could the inverter be dropping out due to either low ac voltage or out of frequency range? Check the ac voltage when it is normal and when it is acting up at the inverter and on the good operating inverter. Some inverters drop out at a set point. Some time it is set in the firmware but often it...

Could be temperature related. A cold solder joint on a panel or loose wire. I have 25 Trina 315 watt panels on my roof. I purchased all of them broken for $50 each 3 years ago. Each one had cold solder joints between the nickel strips from the cells to the blocking diodes in the connection block...

From this morning. They were placing gravel around the foundation. The grade is nearly finished inside the foundation. Concrete soon. These were taken as most workers were having their start of the day meeting.

Not paved but foundation is in. Just stopped by today.

3/22/24 New photos from this morning. There has been quite a lot of fill brought in and a lot of grading. Trucks were actively bringing in more fill.

Welding glass is available in hardware stores welding shops and home improvement stores. You can get it in glasses, replacement lenses, and hoods. As above harbor freight too. The adjustable one I have not really tried but it might have an advantage by being adjustable. Easy to test it before...

You should be OK. I was in the worst tesla regional jam for the Starship launch #1 last April in south Padre Texas. The navigation skipped me over the first charger that was jammed up and sent me to the second one. Would have been fine but they picked a bad day to do maintenance. The charger was...

There is progress. I stopped a few minutes ago. A lot of excavation work going on. Drainage structures and fill being delivered.

The charger in Wells is not too far from Kennebunk and it is much faster. Kennebunk does have convenient bathrooms and a super overpriced Burger King.

Three of the 4 locations have Tesla Superchargers very close. Something on I89 or the Keene area or north of the notches would be better.

I have a micro hydro that outputs 100 to 350 watts. I had it connected to a 48 volt battery outback gvfx3648 inverter and it worked great. I upgraded to powerwalls and so far I have not found a good solution. I have tried the ebay made in China grid tie 1000 and 2000 watt inverters for wind...

If you find the right red wrap post the info here. It would be nice if mine all matched.

https://www.fluid-film.com/ You can buy it on line in a number of places. There are location that provide undercoating with it. It's pretty standard up here in New Hampshire to know about it. The roads are buried in salt during the winter. With out protection car just dissolve.

When I rotated my tires I covered what I could reach with fluid film. It It works pretty well on reducing corrosion for a diy product. It is available in spray cans and in bulk.

It's showing it's back up this morning. 4/8 in use.

Anyone picking up a car in Paramus on Friday 8/25? I picked up a rental one way from New Hampshire to Paramus. My delivery is scheduled for noon. I could fit two more in the car if you need a lift.

It hard to update a post with old fat fingers on an i phone.

I miss entered the serial number. It is revised in the listing now.

It currently has 86,537 miles on it.

This thread is for the general discussion of the marketplace listing 2018 Model 3 AWD Dual Motor Long Range Boosted in New Hampshire. Please add to the discussion here.

I did it in 2019 with my model 3. I think it was 56 miles of range used going up and I gained back 36 on the way down. The Conway supercharge is fast and works well. At least the 3 times I have used it.

Hydro System I have a micro hydro system designed for 400 watts at 48 volts DC. My water source is a seasonal stream with 47 feet of head. I use 25 to 100 GPM from it. It provided about 10% of my electric needs. Solar provided the rest of my electric needs. I have a 4” heat fused HDPE...

Good eye CrazyRabbit. The lead acid batteries were from the Outback grid tie battery backup system I originally built. In the lower grey box are two Enphase Envoy units. One for the 33 M series inverters and one for the 25 Q series inverters. I purchased some used panels with Enphase inverters...

Tonight 4/13 at 5:30 pm power meter was on but showing 0000. The station is not on. Pedestals are not energized.

Anyone traveling down to see the launch? I am. I even rented a Tesla. Meetup at Margaritaville?

4/10 at 5 PM meter is not live yet.

This morning 4 /7/23 the wiring to the transformer is done and the transformer is humming. The meter appears to be off with the display blank. Maybe soon.

I stopped on the way home. Transformer is in the meter is in. No power yet final connection to the main needs to be made.

Stopped by this morning Thursday 3/30 still no transformer and no additional wiring since the last posted photos.

Exactly 45 feet of head 300 feet of 4" HDPE penstock pipe. The turbine can hit 400 watts but the screen at the inlet tend to clog with 4 nozzles turned on so I run it with 3. So I get 250 watts that way. Its is a seasonal brook that tends to dry up in the summer. But it runs in the fall to the...

5.4 kWh on Tuesday the day of the storm and 38.4 the day after. I have 15 kW of solar. The power on Tue was solely from the micro hydro.

The grid just came back up. Powerwalls ran everything from Tuesday at 4:30 pm to Thursday 7:30 am. Even did laundry and charged the car a bit.

The 30" of snow was wet and heavy in Deering, NH. Just enough to take down a lot of trees. 21 times the power dropped from voltage issues caused by limbs hitting the lines. The Powerwalls(4) backed up 2 hours during the storm until the 22nd outage that was caused by lines down. The Powerwall...

Stopped by this morning. Pad is set pole is up. No transformer. Just standard Tesla charge cables.

It looks like a bit more progress preparing for transformer pad. Excavator on site. Taken today.

Stopped by on Sunday. There was no progress. The grading and pad for the transformer has not been done. So they may be waiting for the ground to thaw.

I have had a model 3 LR Dual motor since 9/2019 and live in near Hillsboro, NH. My insurance is with State Farm and is pretty affordable and pretty close to my wife's new Honda CRV in cost. I have Eversource as an electric provider but I have no idea what power costs. I have been running a...

Just up the road from Tesla Paramus in 2019 was an Enterprise rent a car. Tesla set up a one way rental for me. I returned the car to Enterprise and they gave me a ride to Tesla. A rental and a Saturday pick up might make a decent road trip for you. Check to see if Enterprise is still there. I...

I really think a short term solution would be to rent a location in NH for a delivery center. There are some large buildings with parking that are unused. A few malls have Sears or other anchor stores vacant. Concord mall, Rockingham mall ,Pheasant Lane mall. So out of Concord, Salem and Nashua...

The frequency kicks up when the grid drops to control the solar output. If your powerwalls are fully charged there is no where for the power to go from your solar in a grid down condition. The powerwall increased the frequency until the solar inverters get out of range and turn off. When the...

Depends on your gateway. If you have gateway 2 it is super easy to add a non backed up subpanel for the hot tub. A gateway 1 it is a bit different to add one.

That's odd I asked them if they would install an MPP M3 raising kit about a year and a half ago and they said they would. I live on a dirt road and it is hard to get onto the main road how it is graded with out dragging.

Not below Boston but a good shop to take your Tesla to for an alignment. Duncan's auto in Londonderry, NH right off exit 5 I93. They did a great job on my model 3. The tires wear perfectly and the car handles great. No I don't work for them. I found them recommended on this site. They have...

A non update update. I just drove by and no activity since the for sale sign was removed.

I could not get tesla to sell me one. All four powerwalls I found came with wall mounts. It all worked out I was able to do a quad wall mount.

It's now been over two months with the Ohmmu Ver.3 battery with no issues. This is in a 2018 dual motor long range model 3 with software 2022.12.3.20