Search results

It's already hard for some people to post prices or location and even pictures lol. :p

You have PM sir LMK

Is there any sub forum "For sale" ads by Specific Models? I have a Model S and I seem to have to navigate through a sea of Model 3 and Y ads to find any ads for my Model S.

Ok will look into programming and check back with you if still available.

Price, location? How would a person go about programming this to their car?

Camber looks pretty straight and flush, do you know what your alignment is at in the photo?

Not much more to add that everyone had already said, comparing the 2 is almost apples to oranges. Did you try the orientation function on the upper right of the map? I haven't seen that problem yet.

I was thinking maybe pushing out my front aftermarket wheels out around 5mm and am inquiring anyone have some hub centric spacers lying around they would like to sell. I'm looking for a used set in case I don't like them or doesn't work with minimum investment in them for this exploratory...

I was inquiring mainly for the updated looks, and was hoping to be direct bolt on. Thanks

I was referring to the refresh standard calipers, direct bolt on?

Anyone know or tried to see if the new refresh brake calipers are a direct bolt on retrofit to the older S? I was pondering this since the newer calipers look more updated and if there's any added braking performance that would be an extra benefit. I am mainly interested for the look but hey...

Just go onto Amazon or Ebay as long as the state it's high temp. Btw EV brakes don't heat up as often if ever as you probably already know.

Having same 1. audio problem here as well as: 2. slight increased phantom battery drain (no setting were changed as previous SW) 3. TPMS readings are now on opposite sides ( left wheels are reading right side on dash and vise versa) SW version 2023.2.12

I was under the impression to dismantle the lights were just nuts and bolts cuz someone posted a youtube video of just that. Man melting glue seal is way more involved task.

Lol true that, as for myself I'm a driveway DIYer, done many car suspension swaps, brakes , stereos etc. No body, work or paint.

On a scale 1-10 of difficulty, how hard was this project?

Had this set for some months now, finally snapped these to share.

Odds are great that RPM sources all their products from China, and are the same quality and fitment as the cheaper ones found elsewhere.

FYI I have rears 21x10.5 et30 285/30/21 lowered with flush wheel and tire on a 2018 S , however I installed N2itive camber arms and toe. After I got a alignment with new camber set to -.7 the wheel stuck far out of the fender (around 1.25" out). It looked terrible so I had no choice but to go...

I have the continental tpms and bought new oem sensors for my aftermarket wheels, they read ok sometimes showing psi on each wheel but other times I get blank psi. Another problem I get is all the top row indicator lights blink on for 2 seconds randomly then turn off and then they blink again...

I think the brake pedal was installed upside down in the pic. GLWS

I like the new design but prefer the old finishes more.

That would be a great idea but my cigarette socket has constant power and won't turn off, unless I missed something.

Looking for an foot well lighting kit that stays on while driving and shuts off automatically when car is off. Something that looks and behaves like it would if it was OEM.

What's the IG handle?

NO LONGER in need thanks

My 2018 has this issue when car wash or rains. I prey it goes back to normal after a few days of drying.

These aren't bad, and easy to change out. https://www.ebay.com/itm/234539813641

If you go on a tire calculator the 285/30/21 is closer in height with the 245/35/21 than the 265/35/21.

Seems like they spoke too soon and now hoping the subject would fade away.

$50 shipped?

How much to ship to 92646?

I was thinking installing just the Maxton rear diffuser and nothing on the other parts of the car. Will that look weird?

Plastidip looks horrible after a short period of time, use Superwrap, it's the same concept but more paint like when dried. If you go that route.

Is the RPM plaid spoiler an exact replica of the oem plaid spoiler?

Yes I like any side or 3/4 angle shots if possible. Thanks BTW I live in OC as well.

Man that looks good!

2022.20.8 ZIYUETEK micro SD adapter 3.0 Samsung Pro Endurance 256 GB Micro SD

Update, simple reset took care of my issues. LOL

I'm running on the same version but my SD card and adapter with usb 3.0 not reconized. I formatted exFat with Dashcam,SentryClips,RecentClips and

I'm running on the same version but my Samsung Pro Endurance 256Gb Sd card with usb 3.0 adapter not reconized, formatted exFat with 4 folders Dashcam,SentryClips,RecentClips and SavedClips. And also my music cuts out for a few seconds then speakers slight pop then music restores. Any help?

Would you be so kind and post a pic or two please?

I used the search function but did not come up with any results to this question. I read from a fellow member with both the refreshed Plaid and older Raven stating that the trunks are the same so I was wondering if anyone tried the newest style oem spoiler on their older Model S yet? Thanks

Looking for recommendations for TPMS for some aftermarket wheels, I had a unknown brand that went bad twice so I lost confidence in them. For 2018 S if that matters. TIA

Thanks for clarifying

No longer needed. Mod please delete thread if possible. Thanks

I saw your picture and to me it looks like your wheels has a poke? I think i will try 35, I can always get 5mm spacers to get 30 from the 35 I ordered correct?

Do you think 30 will rub with 285 or 295 rubber? Keep in mind my car is pre refreshed Gen 2 model S. How about 35? Sorry guys I'm horrible at this.

ok 30 for the fronts however Mrj25 has 38 for the rears on his Vossens. Is the rear offset 38 too aggressive vs. 30 ? Thanks you