Search results

They seem black But I’m not near the car now, cannot check In think the blinker part is chrome

Exactly the same. 2016, MCU2 AP1 After service visit ti replace the pyro fuse, the message showed up, reboot and msg gone

just booked my camera upgrade, parts: SIDE REPEATER TRIM - CHROME AERO RIB - RIGHT HAND (1514878-01-C) LAMP ASY, SIDE REPEATER CAMERA, RIGHT HAND (1495867-22-C) B-PILLAR CAMERA, RIGHT (1069104-SR-D) SIDE REPEATER TRIM - CHROME AERO RIB, LEFT HAND (1514877-01-C) LAMP ASY, SIDE REPEATER CAMERA...

not anymore. everyone is now stuck at 2023.26.12 until they upgrade their cameras

Interesting, you are the second owner im hearing about the camara upgrade this week. Are you in Europe?

Same here… Model S 90D 2017, FSD, HW3, MCU2, Europe. Since September that im on that version

Which one did you buy? The manufacturer said i need a deep switch receiver, but didn’t say which

same issue here Tesla fixed it by calibrating manually by driving it and following some procedure in their computer. Then after 4 or 5 days it came back

I confirm this also fixed my vibration issues. Model S 90D AP2

Contacted the manufacturer that recommended to add one module compatible with homelink. The current rolling code is not compatible with homelink

I have read in the radio receiver manual that the rolling code can be disabled, maybe this is the solution. manual: https://manuals.easygates.co.uk/PDF/misc/Nice-Oxi-ManualAddendum.pdf

Did you figure it out? I just got a Nice spin garage motor with a Flo4r remote and i cannot make it to work. The car can learn the remote and stores the signal, but it only works once, then the next times it wont open the door. Im sure it is because of the rolling code. But if there would be a...

I finally got my update today! yesterday the car installed the 2021.12.25.7, today when i went to the car there was a game download update, i connected my phone as hotspot and downloaded the game, after this download finishes, the maps update also popups on the update screen to download. I...

2019.21 maps here. I purchased the new MCU2 in February or March. Also no signs of new version

Do you know the commands for that? :)

Is there a way to request the latest firmware update or can only Tesla do that?

Will this also trigger a firmware download if the car has no updates to do? if not what command would trigger a firmware download?

Today i got a new mcu1 under warranty: MCU,MDLSX,EU/JPN/HK/MC/TW/SK,LTE RMN(1098050-99-H) Failed twice and got replaced eventually. I wanted the mcu2 but was not available.. S 90D from October/2016 AP1

Sorry to confuse you. I do understand how projected range and battery icon range work and are calculated. My point is that using the projected range (from the energy app) without accounting the buffer to calculate battery degradation gives a closer degradation value to the battery icon range...

Here’s my data: car as new: 443km , car now: 424km 4.3% degradation using inaccurate range method average: 324Wh/km , projected: 244km, 100%SOC Energy: 79kWh Degradation vs 81.8kWh (according to Jason Hughs) using no buffer: 3.5% removing buffer (your method): 8.3% I haven’t tried the BMS...

Are you sure that using the energy capacity method calculations you get the buffer Included? It makes no sense to include the buffer on the projected range.

Just a few bits of info: I have bought the SanDisk 32 and 64 GB link high endurance with the old logo and it worked fine. (20MB/s write ?) I decided to upgrade the SanDisk 128GB link high endurance with new logo and it overheats making the dashcam to reboot all the time. (40MB/s write) I think...

mine was done in around 30mins by a mobile ranger too. Tested on a Fortum hypercharger with charge rates of 70kW but i arrived with 62%, i guess lower % would give me higher power

How did you request this software version? Only available if you root the car?

Hey guys while testing my swift lib i noticed that i dont need to add any header besides the content-type. POST and GET works just fine

Where do you live? I have one

That support used to come with the premium upgrade

Didnt find yet but here's the release notes for AP1 cars

Did you find out how to remove the top plastic, the one that gives you access to the air vent plastic? I dont wanna try before watching it on a video

Perf config was never removed. just moved to other object.

i think i have similar noise. At low speed i can hear something on the front that sounds like plastic parts are rattling or just moving up and down.

I rarely get updates and today i got this version when my car was parked with full 3G. So i guess we can assume this is being pushed to everyone.

Not possible

In construction

No

I was just digging into the html on my tesla and found out that the referral credit is hidden. Maybe it is coming at some point? In my screenshot it shows 0€ but i have some referral credit left and used too.

You can pay virtaa with credit card. No need to subscribe. It is 30% more expensive though

Honk the horn and flash the lights is possible. Open the trunk and frunk with siri is not possible unfortunately:(

Yes but only on streaming mode.

Do you have more info on that?

You can use touch ID with Tesla's app so no need to introduce the password! or alternatively use my app with Touchid unlock and start: Key for Tesla on the App Store

I didnt know there was thread tracking this changes. Any way we can use this thread to understand what do these values mean. During the summer i will take my car on a boat, i can test my theory. But it would be nice to test this earlier.

Cool :)

So this was a software issue! The seat support was replaced and all my profiles stoped working because they are actually stored on the seat. The seat also stores the steering wheel position. The firmware on the seat was wrong and that is why the control was reversed. They updated the seat...

Hei guys, My car is at version 2018.10 and when analysing the API i found these new fields: "native_latitude" = "60.2"; "native_location_supported" = 1; "native_longitude" = "24.1"; "native_type" = wgs; I cannot test now, but can someone test that these fields keep updating while the...

Is this for europe or usa?

UP and down work fine! Service said they can fix remotly with a FW upgrade

@NickFie this is in Europe. The service center told me it was only a SW upgrade.

So here's mine:

This is quite funny because the bug got me confused for some time. the steering wheel adjustment lever is not reversed when controlling depth. I filmed it here: