You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
$85 + plus S&H or Free Local Pickup in Torrance, CA 90505
Tesla Model X Front License Plate Holder - TorkLift The Law - 2016 2017 2018 2019 2020 2021
From The Manufacturer TorkLiftCentral:
The Tesla Model X front license plate holder is designed specifically to fit your vehicle without...
Hey Guys!
Quick question for you all... Can I use my Safe Jack jack stands on the front 2 jack points only on my Tesla Model 3?
I went over a pot hole and discovered that the front skid plate got damaged in the process resulting in an ugly knocking noise whenever I drive over 45 mph. It's a...
I recently ordered snow tires and new wheels for my MYP as well as the MPP 1.75" lift kit. (a similar set up to what is discussed in this thread).
I got slightly wider and larger diameter for the rear axel vs the front axel (255/60R19 rear vs. 245/55R19 front), mostly for aesthetic reasons...
Hi folks
I am a developer and am in the process of making lifting equipment for electric cars. I want to hear about what the length is between the lifting points across the car (Center to center) in the front and in the rear. I would be happy if you wrote it in mm or cm.
And how deep is the hole...
Hi all,
First post. ;) I appreciate all the info you have been discussing around concerning the Tesla's. Since I've test drove a Model S, I've been waiting for the appropriate family SUV to come out of Tesla. I'v been waiting as much as I can to replace my 2011 JGC for the Cybertruck...
I did some searching on TMC, and I could not find a post that mentioned this, so I thought its worthy of posting.
After having some service on a 1.5 , I asked about having a state inspection. I was told that the Tesla service centers in New York don't offer this, as they would need to make the...
I finally got the chance to try them today while swapping my wheels for my winter set, and I want to say that they worked really well. Robust construction, and the standard pad that came with it was the right size (no overlap with the battery area - I used the rubber pad with the pin).
Hi,
Page 10 of the manual reads:
1. Open the liftgate, then lower it to the desired opening height.
2. Press and hold the button on the underside of the liftgate for two seconds until you hear a confirmation beep.
3. Confirm that you have set it to the desired height by closing the liftgate...