21” uberturbines on m3p

[JomarR]

15mm spacer would depend if you have a performance model or not, on the performance model the hat of the rotor is thinner therefor you might need an 18mm or a slip on to your 15mm if it’s bolted on. As far as camber goes my setup was on stock upper arm

I do not have the performance model which had me wondering if 15mm spacers would work up front. I have the 21x9.5 ubers with the stock 255/35 tires which rubbed slightly on the upper ball joint. I performed a test fit with 20mm spacers up front and it looks like they poke about 5mm more thank my liking. I am aware the wheel needs the 245/30 tires mounted on them as well which will give the wheel a more flush look I am guessing.

Pic of actual test fit of 21”x9.5 Uberturbine with stock 255/35r21 tire and 20mm spacer

 

[Moeb]

Ya you just need a shorter tire that’s all

 

[JomarR]

Ya you just need a shorter tire that’s all

Thank you for your help. I appreciate it and will post pictures as soon as it is completed.